Dirk 3D Printed Electric Motor BOM: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
* 8 Disc magnets per rotor (8 mm thickness, 20mm diameter) [https://www.aliexpress.com/item/32797367574.html?spm=a2g0s.12269583.0.0.23ca74d74jPZDB] | * 8 Disc magnets per rotor (8 mm thickness, 20mm diameter) [https://www.aliexpress.com/item/32797367574.html?spm=a2g0s.12269583.0.0.23ca74d74jPZDB] | ||
* Copper wire (0,2 mm diameter max. definitely not more because you will get eddy current issues) [https://www.koper-draad.nl/product/koperlakdraad-02-mm-awg-32-lengte-1730-meter/] | * Copper wire (0,2 mm diameter max. definitely not more because you will get eddy current issues) [https://www.koper-draad.nl/product/koperlakdraad-02-mm-awg-32-lengte-1730-meter/] | ||
* Bit of brass tubing (4 mm outer diameter) to connect the coil endings in. | * Bit of brass tubing (4 mm outer diameter) to connect the coil endings in. [https://www.amazon.com/uxcell-Length-Thickness-Seamless-Straight/dp/B07Z98QRY2/ref=pd_sbs_328_3/144-2438467-9742231?_encoding=UTF8&pd_rd_i=B07Z98QRY2&pd_rd_r=131ef2a6-97d9-47bf-9030-5819c63fb533&pd_rd_w=AX4BX&pd_rd_wg=Tsszv&pf_rd_p=0b2db3d1-33eb-418a-9672-bb9bd54808e8&pf_rd_r=CCJ76XD911T2D8NXTAG1&psc=1&refRID=CCJ76XD911T2D8NXTAG1] | ||
* Solder | * Solder | ||
* Glue (the type that sticks) | * Glue (the type that sticks) | ||
Revision as of 13:54, 3 August 2020
- 3 phase no feedback Controller - 12V 30A - [1]
- Fidget Spinner Bearings (22mm total diameter, 8mm bore and 7mm width)
- 8 Disc magnets per rotor (8 mm thickness, 20mm diameter) [2]
- Copper wire (0,2 mm diameter max. definitely not more because you will get eddy current issues) [3]
- Bit of brass tubing (4 mm outer diameter) to connect the coil endings in. [4]
- Solder
- Glue (the type that sticks)
- 8 mm metal rod for an axle
- 3d printing filament