CEB Modeling: Difference between revisions
Jump to navigation
Jump to search
| Line 17: | Line 17: | ||
Starting to create the 3D model from previous sketches provided. We should take a look at using square washers on the back of the channels, they help to apply the forces evenly on the bolts and structure. | Starting to create the 3D model from previous sketches provided. We should take a look at using square washers on the back of the channels, they help to apply the forces evenly on the bolts and structure. | ||
[[Image:CEB-Start.jpg|thumb|Start of the modeling]] | |||
[[Image: | |||
Revision as of 01:19, 12 July 2008
Introduction
This page is dedicated to visual and performance modeling of the Liberator, OSE's open source, high-performance CEB press.
Finite Element Analysis
Calculation Symmetry
Bolt Strength
Bolt torquing can be measured by a torque wrench:
Starting to create the 3D model from previous sketches provided. We should take a look at using square washers on the back of the channels, they help to apply the forces evenly on the bolts and structure.
