Industrial Robot Hydraulic Design: Difference between revisions
Jump to navigation
Jump to search
m (Wrote overview for ind. robot hyd. design) |
(→Flow Control: Added Resources on Needle Valves) |
||
| Line 6: | Line 6: | ||
=Flow Control= | =Flow Control= | ||
[http://en.wikipedia.org/wiki/Needle_valve Wikipedia on Needle Valves] | |||
[http://www.tpub.com/content/engine/14105/css/14105_89.htm Tpub on Needle Valves] | |||
Possibility is needle valve operated through a stepper motor which can be electronically controlled. | Possibility is needle valve operated through a stepper motor which can be electronically controlled. | ||
=Directional Control= | =Directional Control= | ||
Revision as of 18:06, 29 May 2011
Overview
The current plan is to use a parallel hydraulic circuit (constant pressure at each joint motor, varying flow based on load force and extent of valve opening). If so, flow control is necessary (to control speed of arm movement for varying load forces) and directional control is necessary (to allow reverse arm movement). Also, a pressure relief valve back to the tank is necessary to maintain continuity of flow even while all 6 joints are stationary.
Flow Control
Possibility is needle valve operated through a stepper motor which can be electronically controlled.
Directional Control
Possibility is 2-position, 4-way solenoid valve
Hydraulic Motor
Possibility is epicyclic (gerotor) motors