CEB Press/Manufacturing Instructions/Soil loading drawer: Difference between revisions
Jump to navigation
Jump to search
William Neal (talk | contribs) No edit summary |
William Neal (talk | contribs) No edit summary |
||
| Line 7: | Line 7: | ||
== Materials Required == | == Materials Required == | ||
<html><table border="1" cellpadding = "3"><tr><td><b>ID<td><b> | <html><table border="1" cellpadding = "3"><tr><td><b>ID<td><b>Quant<td><b>Type<td><b>Length <td><b>Total <td><b>Name<td><b>Detail</table></html> | ||
<html> | <html> | ||
<iframe width='800' height='300' frameborder='0' src='https://spreadsheets.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AmZOu2AF-TF5dG41SWd5Z1NXX21IWHVKWWxSRmRHeXc&single=true&gid=7&range=A23%3AG32&output=html&widget=true'></iframe> | <iframe width='800' height='300' frameborder='0' src='https://spreadsheets.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AmZOu2AF-TF5dG41SWd5Z1NXX21IWHVKWWxSRmRHeXc&single=true&gid=7&range=A23%3AG32&output=html&widget=true'></iframe> | ||
Revision as of 15:53, 8 August 2011
Main > Housing and construction > CEB Press > CEB press building instructions
Tools Required
Materials Required
| ID | Quant | Type | Length | Total | Name | Detail |
Diagrams
Fabrication Steps
(note: part numbers refer to the recently-published parts list on the Bill of Materials page)
- Line up the Inner and Outer Rails (S27, S28) and clamp them together with vise grips.
- Clamp the Sides (S29), Press Plate (S26), Tube (S24) and Back (S22) and the rails together with vise-grips and C-Clamps.
- Tack weld the clamped drawer at a few locations down to prevent warping when it is welded together.
- Complete the welding joints, welding at different locations as you go to prevent warping.
- Check the completed drawer to ensure that it is still straight.
- If they are not straight, the rails may need to be adjusted to ensure that the bearings will roll fit them correctly; if the drawer is not even and aligned, it may not fit properly in the frame.
- Weld the Cylinder Tongue (S23) to the centre of the Back (S22) of the Drawer.
