CEB Press/Manufacturing Instructions/Feet: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|
(No difference)
| |
Revision as of 07:00, 12 August 2011
You will need 4 of these per machine. Each one requires:
Tools Required
- Welder
Materials Required
- Leg Holder (1)
- 1/4” plate, 8”x8” (1)
Diagrams
Fabrication Steps
1) Center the leg holder on the plate, ensuring it is square in all directions.
2) Weld it 100% to the plate.