Talk:CNC Circuit Mill: Difference between revisions
Jump to navigation
Jump to search
(Created page with "Why not skip this project by using a ceiling (or frame) mounted industrial robot with an universal tool mount on the end. All that would be needed would be a table (height-change...") |
No edit summary |
||
| Line 1: | Line 1: | ||
Why not skip this project by using a ceiling (or frame) mounted industrial robot with an universal tool mount on the end. All that would be needed would be a table (height-changeable if needed) and a mountable router (maybe even a plastic extruder and laser.) It might not be accurate enough as is, so the industrial robot might have to be reduced to 3 or 4 joints. | Why not skip this project by using a ceiling (or frame) mounted industrial robot with an universal tool mount on the end. All that would be needed would be a table (height-changeable if needed) and a mountable router (maybe even a plastic extruder and laser.) It might not be accurate enough as is, so the industrial robot might have to be reduced to 3 or 4 joints. | ||
oops, wrong CNC | |||
Revision as of 04:30, 28 October 2011
Why not skip this project by using a ceiling (or frame) mounted industrial robot with an universal tool mount on the end. All that would be needed would be a table (height-changeable if needed) and a mountable router (maybe even a plastic extruder and laser.) It might not be accurate enough as is, so the industrial robot might have to be reduced to 3 or 4 joints. oops, wrong CNC