PowerCube Oil Cooler Mount: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
Line 1: Line 1:
==Oil Cooler Mount==
==Oil Cooler and Fan Mount==


*[2] ¼” x 2” x 24” Plates
The fan is secured to the oil cooler with four plastic ties, which pass through the oil cooler fins. The cooler comes with rubber vibration mounts and steel straps that secure the cooler / fan assembly to the Power Cube frame as shown below.
**This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ
*[2] ¼” x 2” x 1” Plates
*[2] ¼” x 2” x 22” Plates (Note: the holes in these plates should be 6 inches apart, at 3" and 9" from bottom)


::[[Image:OilCoolerMount.png|400px]]
::[[Image:OilCoolerMount.png|400px]]
Note the correction on the dimensions of cooler mounts; hole can be oversized if washers are used:
::{{YoutubePopup|e3H9iLJPrM4|big|powercube-window}}

Latest revision as of 03:27, 14 December 2011

Oil Cooler and Fan Mount

The fan is secured to the oil cooler with four plastic ties, which pass through the oil cooler fins. The cooler comes with rubber vibration mounts and steel straps that secure the cooler / fan assembly to the Power Cube frame as shown below.

OilCoolerMount.png
Retrieved from "https://wiki.opensourceecology.org/index.php?title=PowerCube_Oil_Cooler_Mount&oldid=48004"