CEB Press Fabrication videos: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
*How to connect hydraulics to solenoid. | *How to connect hydraulics to solenoid. | ||
*How to put the proper valves on solenoid (CCH) | *How to put the proper valves on solenoid (CCH) | ||
*[http://opensourceecology.org/wiki/CEB_Press/Manufacturing_Instructions/Frame_with_main_cylinder#Step_10:_Fit_the_drawer_members How to fit the drawer members] | |||
==Videos to be edited== | ==Videos to be edited== | ||
Revision as of 20:35, 16 December 2011
Videos Needed
- How to make coupler for shaft
- How to connect hydraulics to solenoid.
- How to put the proper valves on solenoid (CCH)
- How to fit the drawer members
Videos to be edited
Please put a check 
when item has been edited.
Please put a link in the edited section to your edited video.
Most of these just need the beginning and ends chopped off, and maybe some dead spots in the middle cut out.
- Squaring CEB Drawer
- Using Shims
- Adjusting the drawer
- Making Bolts
- Squaring Cylinder
- Fitting the Cylinder
- Jig Turning
- Stretching the Frame
- Installed Drawers