Marcin ose YouTube Video Content: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 64: Line 64:
*Prototype 1 loader mounted cement mixer, 11 Nov 2011 - [http://www.youtube.com/watch?v=lKCTLTGP7nw&feature=plcp&context=C3c375a4UAOEgsToPDskIOcgO9rMSTy94WRODYDyZx]
*Prototype 1 loader mounted cement mixer, 11 Nov 2011 - [http://www.youtube.com/watch?v=lKCTLTGP7nw&feature=plcp&context=C3c375a4UAOEgsToPDskIOcgO9rMSTy94WRODYDyZx]
*Getting cement mixer going, 24 Nov 2011 - [http://www.youtube.com/watch?v=KyIldsuzp7g&feature=plcp&context=C3c885aaUAOEgsToPDskLstWxkaeVwFr5DMAjoKvQ-]
*Getting cement mixer going, 24 Nov 2011 - [http://www.youtube.com/watch?v=KyIldsuzp7g&feature=plcp&context=C3c885aaUAOEgsToPDskLstWxkaeVwFr5DMAjoKvQ-]
*Lifetrac modification, 28 Nov 2011 - [http://www.youtube.com/watch?v=hICQOCHkDsk&feature=plcp&context=C3e26ae9UAOEgsToPDskI0B_cTaGS1AjyY-BNrlS8v]
*Lifetrac - dismounting wheels, 28 Nov 2011 - [http://www.youtube.com/watch?v=rEgkIXtFk6k&feature=plcp&context=C31acfe4UAOEgsToPDskKGVk2p1fnIDh2JrrxDCZVI]
*Bobcat exploded, 28 Nov 2011 - [http://www.youtube.com/watch?v=kNU0mq-DbZc&feature=plcp&context=C379083aUAOEgsToPDskJv1Y8HKGvJZ2kKVtZAlvYI]
*Bobcat explosion 1, 28 Nov 2011 - [http://www.youtube.com/watch?v=b2V77e659sU&feature=plcp&context=C31894c1UAOEgsToPDskI3kbK7PRAJuaczyBfQW9a2]
*Bobcat to Lifetrac conversion plate, 1 Dec 2011 - [http://www.youtube.com/watch?v=6co62hwFxfE&feature=plcp&context=C30e6550UAOEgsToPDskLK8CiTb998RrWD6nkh_z4r]
*Lifetrac moving rebar and bending table into place, 2 Dec 2011 - [http://www.youtube.com/watch?v=kpzldZleznk&feature=plcp&context=C3b38aabUAOEgsToPDskIEYIXHFUlVQ8umZL7mNuuZ]
*Lifetrac weight balancing, 2 Dec 2011 - [http://www.youtube.com/watch?v=HO2ps3MWdsU&feature=plcp&context=C31aa023UAOEgsToPDskKr3gOJlWdCqPdKGpgK1uYo]
*Filling Lifetrac with gash, 2 Dec 2011 - [http://www.youtube.com/watch?v=C0wOf1T8Tbs&feature=plcp&context=C3c2f86aUAOEgsToPDskK38zgmsn_h-sXkovLmu4b-]
*Filling Lifetrac with gas, 2 Dec 2011 - [http://www.youtube.com/watch?v=Sr2kdsh1iIQ&feature=plcp&context=C3496f5aUAOEgsToPDskJTc29pamCgLM1MByMyVKhJ]
*Loading Lifetrac up, 2 Dec 2011 - [http://www.youtube.com/watch?v=uqc8CbyKcc0&feature=plcp&context=C3fe3743UAOEgsToPDskKYtB3akgWiXhgbklZE-Zy0]
*Loading rebar, 2 Dec 2011 - [http://www.youtube.com/watch?v=8M2XdJ48i_I&feature=plcp&context=C38ea659UAOEgsToPDskIHm4b9U03gwVp99dTiUewC]
*Rebar load on tractor, 2 Dec 2011 - [http://www.youtube.com/watch?v=k7xX5yQ4660&feature=plcp&context=C3bf52c3UAOEgsToPDskLjqQg3PbsWwzOSusWJwyFx]
*Loading rebar on tractor, 2 Dec 2011 - [http://www.youtube.com/watch?v=c-iXRkAE_cE&feature=plcp&context=C37d2335UAOEgsToPDskKD3B12L_VKEF-ZfLus6lBt]
*Bent rebar on tractor, 2 Dec 2011 - [http://www.youtube.com/watch?v=lVA48sBGIBI&feature=plcp&context=C31a0946UAOEgsToPDskKS0mwI8k-eEAIy-1KsaKHv]
*Lifetrac test drive, 2 Dec 2011 - [http://www.youtube.com/watch?v=wzpAEca1NA0&feature=plcp&context=C3f11382UAOEgsToPDskK2aac_icrk-A1MgrvYF5kM]
*Tractor Disassembly video, 4 Dec 2011 - [http://www.youtube.com/watch?v=-UpMnhPkiQ0&feature=plcp&context=C3e59a96UAOEgsToPDskIE7QIYA_fWoFRtx_uVGVZ9]
*Tractor in pieces, 7 Dec 2011 - [http://www.youtube.com/watch?v=13M52fw-1HA&feature=plcp&context=C367f61bUAOEgsToPDskIXOMj52bsIHapXhBioOtij]
*Tractor and wall build, 7 Dec 2011 - [http://www.youtube.com/watch?v=0Q9XiVbSCv0&feature=plcp&context=C3353e78UAOEgsToPDskKPd69xpKBP39oyqf87BTea]
*Heater and tractor, 7 Dec 2011 - [http://www.youtube.com/watch?v=D37hvba_ks8&feature=plcp&context=C39f2621UAOEgsToPDskLsOAk80nF6ZgJAZYMQ7DrK]
*Cutting hussars for tractor wheels with a bandsaw, 9 Dec 2011 - [http://www.youtube.com/watch?v=-5nfJQJO2wQ&feature=plcp&context=C3c85b16UAOEgsToPDskKT6w0vjDpLc5vKE1-V-f28]
*Wellding Lifetrac wheel collars, 10 Dec 2011 - [http://www.youtube.com/watch?v=yQa0n5l1jGo&feature=plcp&context=C3338e0fUAOEgsToPDskL7bIQ3V2l8QlAZBpDpnpNA]
*Shortening prototype 2 Lifetrac to make prototype 3, 11 Dec 2011 - [http://www.youtube.com/watch?v=p2UGgO6noZc&feature=plcp&context=C30b51efUAOEgsToPDskINuQqpgnO7j4LKSw3rndHq]
*Shortening prototype 2, 11 Dec 2011 - [http://www.youtube.com/watch?v=tmN8Fx5hzwU&feature=plcp&context=C39adb33UAOEgsToPDskJsDSL1yxXpSX0AAWC_AGOt]
*Towards Lifetrac 3, 11 Dec 2011 - [http://www.youtube.com/watch?v=NuL4bX029yU&feature=plcp&context=C3608eddUAOEgsToPDskITmYvRtqvu4nIR-Y4sEeXd]
*Gap in Lifetrac 2, 11 Dec 2011 - [http://www.youtube.com/watch?v=OAuiup5_Onw&feature=plcp&context=C3e64f5cUAOEgsToPDskJSFlOSO4WDvtfXxSB8Mgua]
*Gap in Lifetrac 2 part 2, 11 Dec 2011 - [http://www.youtube.com/watch?v=ENpdtk9fNsw&feature=plcp&context=C3bdf4b3UAOEgsToPDskItM0J9RSNREgX-9XmZHLrY]
*Lifetrac 2 simple drive, 11 Dec 2011 - [http://www.youtube.com/watch?v=oPDo-mjeM7Q&feature=plcp&context=C396f7e9UAOEgsToPDskLcGwsWolaryqv5gckX4ovj]
*Tractor wheel valve hydraulics modification, 13 Dec 2011 - [http://www.youtube.com/watch?v=HcoommI4Eis&feature=plcp&context=C347974eUAOEgsToPDskIgZctBM8jTm8rPMFNrUAAo]
*New Lifetrac hydraulic motor, 16 Dec 2011 - [http://www.youtube.com/watch?v=Vp6gAEmETfk&feature=plcp&context=C3edf5d3UAOEgsToPDskLlP8MG8uTot75U2OsMOwLM]
---
---
*Power beyond port - hack - [http://www.youtube.com/watch?v=-UYuw-Dei2Q]
*Power beyond port - hack - [http://www.youtube.com/watch?v=-UYuw-Dei2Q]
Line 178: Line 207:
*Shaker shaking soil down ceb machine, 26 Nov 2011 - [http://www.youtube.com/watch?v=MwNaRa-rayw&feature=plcp&context=C3afee23UAOEgsToPDskKoaliX9gdmEzZte9-mR_lL]
*Shaker shaking soil down ceb machine, 26 Nov 2011 - [http://www.youtube.com/watch?v=MwNaRa-rayw&feature=plcp&context=C3afee23UAOEgsToPDskKoaliX9gdmEzZte9-mR_lL]
*Another minute, 26 Nov 2011 - [http://www.youtube.com/watch?v=5yrc0-UwZMg&feature=plcp&context=C3a8c9c1UAOEgsToPDskJu8KzXydHph3_AJJDLWV8B]
*Another minute, 26 Nov 2011 - [http://www.youtube.com/watch?v=5yrc0-UwZMg&feature=plcp&context=C3a8c9c1UAOEgsToPDskJu8KzXydHph3_AJJDLWV8B]
*Brick city November 28, 28 Nov 2011 - [http://www.youtube.com/watch?v=SFrECttMxEE&feature=plcp&context=C38e14e3UAOEgsToPDskLH3vn-F5pJJvfAxr8HvImz]
*One minute of 4" bricks, 28 Nov 2011 - [http://www.youtube.com/watch?v=4vEXUAUv9OQ&feature=plcp&context=C37852b9UAOEgsToPDskI_ryp0QTkGQzbD19Uj8qna]
*Another minute and shaker, 28 Nov 2011 - [http://www.youtube.com/watch?v=hLVOX7ckz2E&feature=plcp&context=C31dca43UAOEgsToPDskLLZWoB3n7ZqLCpVymPfxDp]
*Reinforcing CEB compression chamber, 28 Nov 2011 - [http://www.youtube.com/watch?v=hA1eBPKkTv8&feature=plcp&context=C38886fcUAOEgsToPDskKWm0hJpYII_LMsBfx900fN]
*Brick pressing and roller setup, 28 Nov 2011 - [http://www.youtube.com/watch?v=WdBGzQUMd4g&feature=plcp&context=C3f9cebbUAOEgsToPDskLpfdM_ctqTErLr7Aw6E61n]
*Brick mudding and laying, 28 Nov 2011 - [http://www.youtube.com/watch?v=PUrnUKQQL9Y&feature=plcp&context=C364a7e2UAOEgsToPDskKoqXooTLdn24hdhS-NAJIl]
*Replacing solenoid driver board on CEB controller, 29 Nov 2011 - [http://www.youtube.com/watch?v=mJLojvhpizg&feature=plcp&context=C370eca5UAOEgsToPDskKAYJcoK_NNRK73AN4L5RGC]
*James Slade on shaker motor safety plate, 1 Dec 2011 - [http://www.youtube.com/watch?v=Af03NYF1WV4&feature=plcp&context=C35d3f31UAOEgsToPDskJcvsaNANekbMKBi6xowyDs]
*Ceb press brick rollers, 1 Dec 2011 - [http://www.youtube.com/watch?v=8U2yO25Kne4&feature=plcp&context=C3f9e18aUAOEgsToPDskLy0ybJFLsKuTxK2NeE7E-L]
*Rollers coming off the production line, 2 Dec 2011 - [http://www.youtube.com/watch?v=VydOgO4mu_g&feature=plcp&context=C342c48cUAOEgsToPDskI4MLZxafBR_uz83-xc69Bc]
*Dec 2 last Day pressing, 2 Dec 2011 - [http://www.youtube.com/watch?v=ckgIvfYlibo&feature=plcp&context=C38cec32UAOEgsToPDskKOBFxsvOK4z7GWYxev2bpE]
*Meeting on CEB preparation october, 2 Dec 2011 - [http://www.youtube.com/watch?v=T36xkGt8VaQ&feature=plcp&context=C3a7fd51UAOEgsToPDskKDK4r5LfZ5Wa371X-kJyJl]
*Taking CEB press apart for documentation, 4 Dec 2011 - [http://www.youtube.com/watch?v=VLndfV5ZA0w&feature=plcp&context=C32a487bUAOEgsToPDskKBDePNa4sFv4qTI0KtQWiT]
*CEB solenoid driver - surface mount 1, 5 Dec 2011 - [http://www.youtube.com/watch?v=0D3Z_63ABnQ&feature=plcp&context=C3322412UAOEgsToPDskLryQfK4KJx9MCqwokFqI_U]
*CEB solenoid driver - surface mount - part 2, 5 Dec 2011 - [http://www.youtube.com/watch?v=9xNVYiU1Yw4&feature=plcp&context=C34a8df9UAOEgsToPDskKNFTU0L4l-MRsrbvy_UGV6]
*Surface mount part 3, 5 Dec 2011 - [http://www.youtube.com/watch?v=DjMVsdlu-8I&feature=plcp&context=C3eb3327UAOEgsToPDskKA1e1xCUZxuUt2EU6PRrnm]
*Surface mount part 4, 6 Dec 2011 - [http://www.youtube.com/watch?v=l065TakUwto&feature=plcp&context=C3fc76eaUAOEgsToPDskIs8ERwLYpGBF_X3AQ0dT5v]
*Surface mount part 5, 6 Dec 2011 - [http://www.youtube.com/watch?v=s1pLeismEHs&feature=plcp&context=C3831458UAOEgsToPDskKNIBwHAq1TtMsjAnevluRu]
*Surface mount part 6, 6 Dec 2011 - [http://www.youtube.com/watch?v=bmPgI_TTRyM&feature=plcp&context=C37bbe9dUAOEgsToPDskJyyglhHIyPg1Uha3KXbjAi]
*Surface mount part 7, 6 Dec 2011 - [http://www.youtube.com/watch?v=uPP5Nu2ejNc&feature=plcp&context=C3941968UAOEgsToPDskJsbGooxzJaM4Kp1KAJ0sR1]
*Surface mount part 8, 6 Dec 2011 - [http://www.youtube.com/watch?v=fN_ZFsioekY&feature=plcp&context=C3f40a91UAOEgsToPDskIyqOW_fM-nRJy91Zl87xu8]
*Surface mount part 9, 6 Dec 2011 - [http://www.youtube.com/watch?v=nH_ywW_bIdU&feature=plcp&context=C38ee3aeUAOEgsToPDskKZihpIvVzFb3qVEvNfpL6h]
*Surface mount part 10, 6 Dec 2011 - [http://www.youtube.com/watch?v=DtZmwgOglCY&feature=plcp&context=C3d33a78UAOEgsToPDskJSUSnt0Nii_YG1gZZQE2PY]
*Surface mount part 11, 6 Dec 2011 - [http://www.youtube.com/watch?v=pxUABikBfd0&feature=plcp&context=C3f5c4d7UAOEgsToPDskLmXV11eHqvQkiNrm5BBsFj]
*Surface mount part 12, 6 Dec 2011 - [http://www.youtube.com/watch?v=xMB2bFHyhtw&feature=plcp&context=C36628d5UAOEgsToPDskJENofYb-LpIVqVFVtBaeUY]
*Surface mount part 13, 6 Dec 2011 - [http://www.youtube.com/watch?v=8TGLlu8lhTE&feature=plcp&context=C3d5cdd6UAOEgsToPDskLW9O9lZzItGZSftEgsdC-G]
*Surface mount part 14, 6 Dec 2011 - [http://www.youtube.com/watch?v=_hCY2pX6CHo&feature=plcp&context=C360d6a1UAOEgsToPDskLcDxIK8K-HAuR_9W_t-0zu]
*Surface mount part 15, 6 Dec 2011 - [http://www.youtube.com/watch?v=_qJEOG4tN00&feature=plcp&context=C3f9878eUAOEgsToPDskJBq4ZFvdQrR98g4yPUslS-]
*Surface mount part 16, 7 Dec 2011 - [http://www.youtube.com/watch?v=N8W-OHfj0BE&feature=plcp&context=C35caeb6UAOEgsToPDskLLJxP5vIPMQu9qHGQezzMO]
*Surface mount part 17, 7 Dec 2011 - [http://www.youtube.com/watch?v=N20za3ao9LA&feature=plcp&context=C30224a3UAOEgsToPDskJtxZvvWq3xdCfl27XM64JF]
*Surface mount part 18, 7 Dec 2011 - [http://www.youtube.com/watch?v=vUHHzordAD0&feature=plcp&context=C3eea632UAOEgsToPDskKKNPIeB5Tf7ZnAqUowEzaX]
*Surface mount part 19, 7 Dec 2011 - [http://www.youtube.com/watch?v=Es6dbl8YWAg&feature=plcp&context=C376c44dUAOEgsToPDskIV4H9YTHb2Jt4DR8QdDBTG]
*Surface mount part 20, 7 Dec 2011 - [http://www.youtube.com/watch?v=QjMDBCSKydk&feature=plcp&context=C3ba5a66UAOEgsToPDskKjkGZrlDENPc6eW0ncUrVl]
*Surface mount part 21, 7 Dec 2011 - [http://www.youtube.com/watch?v=FI_UI1hQdxs&feature=plcp&context=C355fceeUAOEgsToPDskL3EuuuQ6TzXIJ7GCLihc5C]
*Laying CEB columns below zero, 7 Dec 2011 - [http://www.youtube.com/watch?v=Oq9VJiE103U&feature=plcp&context=C352f899UAOEgsToPDskJr1wkmtqlDbonjqWGA_DMW]
*Workshop walls subzero, 7 Dec 2011 - [http://www.youtube.com/watch?v=LBsHqkU0XIQ&feature=plcp&context=C3f4fad7UAOEgsToPDskK6DW1INuLswYZrGHEX5mWr]
*Tractor and wall build, 7 Dec 2011 - [http://www.youtube.com/watch?v=0Q9XiVbSCv0&feature=plcp&context=C3353e78UAOEgsToPDskKPd69xpKBP39oyqf87BTea]
*Workshop wall detail, 11 Dec 2011 - [http://www.youtube.com/watch?v=RnkVb0xL0Ro&feature=plcp&context=C3cd5b0eUAOEgsToPDskKKeyhIjux7N-ep3R5f3F0x]
*Spraying bricks, 11 Dec 2011 - [http://www.youtube.com/watch?v=CZRbyPJAFxg&feature=plcp&context=C39ef0f6UAOEgsToPDskIQ1RUW55wfO28onoVPEIfe]
*Column laying technique, 11 Dec 2011 - [http://www.youtube.com/watch?v=GsiKdM546ts&feature=plcp&context=C33654d9UAOEgsToPDskJr1yqiP3PKYU1mNbyqT0JK]
*CEB walls coming up, 11 Dec 2011 - [http://www.youtube.com/watch?v=MW0OYO0aMEs&feature=plcp&context=C3c13ff8UAOEgsToPDskI62pT8dE4vwGkzTVR3XY40]
*CEB Disassembly documentation, 11 Dec 2011 - [http://www.youtube.com/watch?v=T36vFWQ8VM8&feature=plcp&context=C387a595UAOEgsToPDskJ18gxGHqF5FhTGcBrRvExo]
---
---
*roller setup - [http://www.youtube.com/watch?v=WdBGzQUMd4g&feature=plcp&context=C3022067UDOEgsToPDskJ2vZWK0Gp_I-wuF85xeJ7p]
*roller setup - [http://www.youtube.com/watch?v=WdBGzQUMd4g&feature=plcp&context=C3022067UDOEgsToPDskJ2vZWK0Gp_I-wuF85xeJ7p]
Line 185: Line 257:
*Controller board etching playlist - [http://www.youtube.com/playlist?list=PL367D716F32C62AC5&feature=view_all]
*Controller board etching playlist - [http://www.youtube.com/playlist?list=PL367D716F32C62AC5&feature=view_all]


=Professional Review=
=Professional Opinions=
*CEB Construction Review, 16 Nov 2011 - [http://www.youtube.com/watch?v=T9KWd42saQg&feature=plcp&context=C38ad6d0UAOEgsToPDskI79YumEKK7xikU9kj0Fjvy]
*CEB Construction Review, 16 Nov 2011 - [http://www.youtube.com/watch?v=T9KWd42saQg&feature=plcp&context=C38ad6d0UAOEgsToPDskI79YumEKK7xikU9kj0Fjvy]
*Covering the Workshop, 22 Nov 2011 - [http://www.youtube.com/watch?v=m6tyXguzWKs&feature=plcp&context=C302084eUAOEgsToPDskIzamjd-1IOeuhJyRCOCpc9]
*Covering the Workshop, 22 Nov 2011 - [http://www.youtube.com/watch?v=m6tyXguzWKs&feature=plcp&context=C302084eUAOEgsToPDskIzamjd-1IOeuhJyRCOCpc9]
Line 195: Line 267:
*Reject Lime Blocks, 25 Nov 2011 - [http://www.youtube.com/watch?v=3zGK9ak7u2I&feature=plcp&context=C3dd60b0UAOEgsToPDskIu47c9csk93GgQnxF6Zxc-]
*Reject Lime Blocks, 25 Nov 2011 - [http://www.youtube.com/watch?v=3zGK9ak7u2I&feature=plcp&context=C3dd60b0UAOEgsToPDskIu47c9csk93GgQnxF6Zxc-]
*Column prototype, 25 Nov 2011 - [http://www.youtube.com/watch?v=Azs4HdSz4vw&feature=plcp&context=C3d903ffUAOEgsToPDskJA-SkzGnySvBZzs5NzB8j6]
*Column prototype, 25 Nov 2011 - [http://www.youtube.com/watch?v=Azs4HdSz4vw&feature=plcp&context=C3d903ffUAOEgsToPDskJA-SkzGnySvBZzs5NzB8j6]
*-Perfect day for pressing bricks, 26 Nov 2011 - [http://www.youtube.com/watch?v=nD9PlliLqsQ&feature=plcp&context=C3247e5dUAOEgsToPDskJ_YVr_zFc1YQ3aLpdTUqzS]
*Perfect day for pressing bricks, 26 Nov 2011 - [http://www.youtube.com/watch?v=nD9PlliLqsQ&feature=plcp&context=C3247e5dUAOEgsToPDskJ_YVr_zFc1YQ3aLpdTUqzS]
*Fredrick Emmons, 28 Nov 2011 - [http://www.youtube.com/watch?v=NRX7e39psag&feature=plcp&context=C303c7b9UAOEgsToPDskIIxBBYNQh7YfHqG5Bdp5j3]
*Stabilized lime blocks, 1 Dec 2011 - [http://www.youtube.com/watch?v=u6HLSOjAqqk&feature=plcp&context=C3a874c2UAOEgsToPDskJUiGlARmG-ds5WBNFu7CRX]
*Steam Auto Club of America visits Factor e Farm, 8 Dec 2011 - [http://www.youtube.com/watch?v=mhE_3d3WSvs&feature=plcp&context=C33b850dUAOEgsToPDskJl3blwr5oxEnPg_cRXbQ3p]
*Steam Generator, 8 Dec 2011 - [http://www.youtube.com/watch?v=vwKtUrNffdM&feature=plcp&context=C322f037UAOEgsToPDskI7lAq4O76U6L0eO-xxia2G]
*Wally Munster modern steam engine, 8 Dec 2011 - [http://www.youtube.com/watch?v=n-ZgkgvZW7E&feature=plcp&context=C3a43214UAOEgsToPDskIwyFrbPTi0vDXMamfGqIz3]
*Burning smoke for a clean flame, 8 Dec 2011 - [http://www.youtube.com/watch?v=0zIiHp4vCto&feature=plcp&context=C3ed7be1UAOEgsToPDskJDERpINDe99mMVYvUCfTmL]
*HabLab steps towards roof, 10 Dec 2011 - [http://www.youtube.com/watch?v=mVVuRcMp8v8&feature=plcp&context=C3d7eebfUAOEgsToPDskKL7W27zPDo1JlFhfxb8CgU]
*Workshop wall detail, 11 Dec 2011 - [http://www.youtube.com/watch?v=RnkVb0xL0Ro&feature=plcp&context=C3cd5b0eUAOEgsToPDskKKeyhIjux7N-ep3R5f3F0x]
*Spraying bricks, 11 Dec 2011 - [http://www.youtube.com/watch?v=CZRbyPJAFxg&feature=plcp&context=C39ef0f6UAOEgsToPDskIQ1RUW55wfO28onoVPEIfe]
*Column laying technique, 11 Dec 2011 - [http://www.youtube.com/watch?v=GsiKdM546ts&feature=plcp&context=C33654d9UAOEgsToPDskJr1yqiP3PKYU1mNbyqT0JK]
*HabLab roof support, 15 Dec 2011 - [http://www.youtube.com/watch?v=WYHwxBL6dqE&feature=plcp&context=C3816e36UAOEgsToPDskKvkLrBNmsr_MOjhORXxNkc]


=Solar=
=Solar=
Line 231: Line 314:
*Loading soil without pulverizer, 25 Nov 2011 - [http://www.youtube.com/watch?v=_xc_Owf83uo&feature=plcp&context=C3697df9UAOEgsToPDskICtrTFO0EB9AGHAzPiEwm2]
*Loading soil without pulverizer, 25 Nov 2011 - [http://www.youtube.com/watch?v=_xc_Owf83uo&feature=plcp&context=C3697df9UAOEgsToPDskICtrTFO0EB9AGHAzPiEwm2]
*Loading hopper straight from loader bucket, 26 Nov 2011 - [http://www.youtube.com/watch?v=4G2DiAo3fOA&feature=plcp&context=C383726fUAOEgsToPDskI7SZKqFMRN2nvBl03ApaL5]
*Loading hopper straight from loader bucket, 26 Nov 2011 - [http://www.youtube.com/watch?v=4G2DiAo3fOA&feature=plcp&context=C383726fUAOEgsToPDskI7SZKqFMRN2nvBl03ApaL5]
*Soil pulverizer overview, 29 Nov 2011 - [http://www.youtube.com/watch?v=Dg_K5RlKvFk&feature=plcp&context=C31b56deUAOEgsToPDskK7mToWxWRxIdRBYUON_c1J]
*Moving soil pulverizer into shop, 29 Nov 2011 - [http://www.youtube.com/watch?v=ATgOE3kt05c&feature=plcp&context=C385507eUAOEgsToPDskJhi2P7gqhCHzEj1G_ZziKm]
*Bobcat conversion plate mounts pulverizer, 1 Dec 2011 - [http://www.youtube.com/watch?v=R611rt9rn5A&feature=plcp&context=C3e2a890UAOEgsToPDskJMhnrWaND4ut5c_zy7SGsN]
*Pulverizer Disassembly, 12 Dec 2011 - [http://www.youtube.com/watch?v=qvZleSm8aFI&feature=plcp&context=C39874ccUAOEgsToPDskJ0Q9Wt-mwvdjQRw1BXri4w]


=Biodiesel Reactor=
=Biodiesel Reactor=
Line 252: Line 340:
*Torch table with faulty Xylotex controller, 17 May 2011 - [http://www.youtube.com/watch?v=wLzlj_7Cwp0&feature=plcp&context=C3579cecUAOEgsToPDskLtg8blwaR6X7qMdIxn2EJC]
*Torch table with faulty Xylotex controller, 17 May 2011 - [http://www.youtube.com/watch?v=wLzlj_7Cwp0&feature=plcp&context=C3579cecUAOEgsToPDskLtg8blwaR6X7qMdIxn2EJC]
*CNC Torch Table Tip height, 11 Sep 2011 - [http://www.youtube.com/watch?v=PTEMqvs0lJw&feature=plcp&context=C386bdd6UAOEgsToPDskIrb4MV0ri5lDWr0wAVmvO0]
*CNC Torch Table Tip height, 11 Sep 2011 - [http://www.youtube.com/watch?v=PTEMqvs0lJw&feature=plcp&context=C386bdd6UAOEgsToPDskIrb4MV0ri5lDWr0wAVmvO0]
*Cnc torch table height adjustment, 10 Dec 2011 - [http://www.youtube.com/watch?v=e5qwYkNPMWA&feature=plcp&context=C3fbf5feUAOEgsToPDskK-_5MIyYnqKH7rI8GW4HF7]


=Power Cube=
=Power Cube=
Line 327: Line 417:
*Case drain returns on tractor, 22 Oct 2011 - [http://www.youtube.com/watch?v=9ggPiMzIDO4&feature=plcp&context=C35cdb58UAOEgsToPDskLMz3S90d9sr6w65iowcDWv]
*Case drain returns on tractor, 22 Oct 2011 - [http://www.youtube.com/watch?v=9ggPiMzIDO4&feature=plcp&context=C35cdb58UAOEgsToPDskLMz3S90d9sr6w65iowcDWv]
*Power cube power and return, 22 Oct 2011 - [http://www.youtube.com/watch?v=aokPNqd8YJI&feature=plcp&context=C3066005UAOEgsToPDskKznZnpG7CsBm9gbGaUPenn]
*Power cube power and return, 22 Oct 2011 - [http://www.youtube.com/watch?v=aokPNqd8YJI&feature=plcp&context=C3066005UAOEgsToPDskKznZnpG7CsBm9gbGaUPenn]
*Welding battery tabs, 2 Dec 2011 - [http://www.youtube.com/watch?v=ZqE27aBfY3U&feature=plcp&context=C3f77697UAOEgsToPDskJpI9Jkvqgr_4r-OjwRFrAV]
*Kohler mount - 2" longer, 3 Dec 2011 - [http://www.youtube.com/watch?v=IbXHsCu3Ot8&feature=plcp&context=C30adf91UAOEgsToPDskI1turp9Ey5AjTxkS_YT63o]
*Fitting issues on Kohler engine, 3 Dec 2011 - [http://www.youtube.com/watch?v=Q9aPwBVXzig&feature=plcp&context=C344df84UAOEgsToPDskJCC5GrrmxlQWqITTfRQEjG]


=Dimensional Sawmill=
=Dimensional Sawmill=
Line 337: Line 431:
-Prototyping costs of dimensional sawmill, 22 Sep 2011 - [http://www.youtube.com/watch?v=SpOou6ZlczM&feature=plcp&context=C3d1b87eUAOEgsToPDskKUjrp9WVII1j43AKlF_KV2]
-Prototyping costs of dimensional sawmill, 22 Sep 2011 - [http://www.youtube.com/watch?v=SpOou6ZlczM&feature=plcp&context=C3d1b87eUAOEgsToPDskKUjrp9WVII1j43AKlF_KV2]
-Sawmill z, 22 Sep 2011 - [http://www.youtube.com/watch?v=WrmjeNXYFvY&feature=plcp&context=C3364015UAOEgsToPDskI3jfoccARIYTw5A8zRaJ_8]
-Sawmill z, 22 Sep 2011 - [http://www.youtube.com/watch?v=WrmjeNXYFvY&feature=plcp&context=C3364015UAOEgsToPDskI3jfoccARIYTw5A8zRaJ_8]
-Sawmill 1, 7 Dec 2011 - [http://www.youtube.com/watch?v=i7g-PTCuPSU&feature=plcp&context=C3dae70fUAOEgsToPDskInSz3y6yzFnNIAlS8DyM1b]
-Sawmill 2, 7 Dec 2011 - [http://www.youtube.com/watch?v=vPhgdCYHPAI&feature=plcp&context=C35d06acUAOEgsToPDskJkmcoyd99hyTKL3kTCZeEK]
-Sawmill 3, 7 Dec 2011 - [http://www.youtube.com/watch?v=Pxiss1Rc2pg&feature=plcp&context=C3a2b118UAOEgsToPDskIppt4CA6Gk5cC-BsC8ad6X]


=Factor e Live=
=Factor e Live=
Line 386: Line 484:


*Open Source CNC Lathe, 12 Sep 2011 - [http://www.youtube.com/watch?v=D6gQEz8OiYw&feature=plcp&context=C3ef050fUAOEgsToPDskIzQFpTb1d9yiZlb3LuZy9K]
*Open Source CNC Lathe, 12 Sep 2011 - [http://www.youtube.com/watch?v=D6gQEz8OiYw&feature=plcp&context=C3ef050fUAOEgsToPDskIzQFpTb1d9yiZlb3LuZy9K]
*Lathe conversion to hydraulics, 12 Dec 2011 - [http://www.youtube.com/watch?v=J7JetivqHEo&feature=plcp&context=C361c3a4UAOEgsToPDskJK3tQ44w32-p44JY3819ic]


=Baling/Hay Making=
=Baling/Hay Making=
Line 532: Line 632:
*First use of workshop, 27 Nov 2011 - [http://www.youtube.com/watch?v=q7t6ouSXRw8&feature=plcp&context=C3b700dbUAOEgsToPDskIieDZAt4l53A_vBE7t_2-w]
*First use of workshop, 27 Nov 2011 - [http://www.youtube.com/watch?v=q7t6ouSXRw8&feature=plcp&context=C3b700dbUAOEgsToPDskIieDZAt4l53A_vBE7t_2-w]
*Workshop+James Slade, 28 Nov 2011 - [http://www.youtube.com/watch?v=MgnJVVWG2Qc&feature=plcp&context=C34da49fUAOEgsToPDskILLwbhVjyozNuE3KCaSFqp]
*Workshop+James Slade, 28 Nov 2011 - [http://www.youtube.com/watch?v=MgnJVVWG2Qc&feature=plcp&context=C34da49fUAOEgsToPDskILLwbhVjyozNuE3KCaSFqp]
*Moving roof boxes on, 28 Nov 2011 - [http://www.youtube.com/watch?v=UU5fn9QHHoI&feature=plcp&context=C332b874UAOEgsToPDskLRjh3ypuBQa7f7-vZXcwrq]
*Moving roof boxes, 28 Nov 2011 - [http://www.youtube.com/watch?v=STITPQC7wF8&feature=plcp&context=C324b638UAOEgsToPDskIMiBR_qPkP_pjiACt7JxSr]
*Brick city November 28, 28 Nov 2011 - [http://www.youtube.com/watch?v=SFrECttMxEE&feature=plcp&context=C38e14e3UAOEgsToPDskLH3vn-F5pJJvfAxr8HvImz]
*Pushing roof sections onto workshop, 28 Nov 2011 - [http://www.youtube.com/watch?v=8OZleuMZRRw&feature=plcp&context=C3cead4aUAOEgsToPDskLg8Z2l-ZLDisdB7xhKB6eX]
*Monday morning workshop construction, 28 Nov 2011 - [http://www.youtube.com/watch?v=Gv9WEuerAKw&feature=plcp&context=C38a024fUAOEgsToPDskKvcHw5Yx0iszflUEhitBMH]
*Unloading plywood and framing, 28 Nov 2011 - [http://www.youtube.com/watch?v=5vEK7CQoWV8&feature=plcp&context=C3dd666bUAOEgsToPDskKOOfJ36f0m1PSy1kDDhxUs]
*Roof metal beginning to go on, 1 Dec 2011 - [http://www.youtube.com/watch?v=QJkLiE2bwi0&feature=plcp&context=C334ea39UAOEgsToPDskL271BzXItqs5-Vy2g-0JeV]
*Roof going up, 1 Dec 2011 - [http://www.youtube.com/watch?v=vkcSMHR0FUk&feature=plcp&context=C3144c52UAOEgsToPDskKpe6SycYQC-ohXEngNTjzq]
*Thursday Dec 1, 1 Dec 2011 - [http://www.youtube.com/watch?v=9awxKoHh85k&feature=plcp&context=C3b44548UAOEgsToPDskI24dQVdO34ftMWYFSflPO8]
*On the roof, 2 Dec 2011 - [http://www.youtube.com/watch?v=zGD-mdN-owA&feature=plcp&context=C3f334d1UAOEgsToPDskJvqs-aeD6xArx6VhfxAJH5]
*Roof going on, 2 Dec 2011 - [http://www.youtube.com/watch?v=1W1ZfxagRjs&feature=plcp&context=C35f0483UAOEgsToPDskJDzZZjdQLI02wDG-aPw552]
*Sliding roof panels up, 2 Dec 2011 - [http://www.youtube.com/watch?v=rfkB5u2akSg&feature=plcp&context=C3d8a1d1UAOEgsToPDskKNFywL9s2UQMq1ayl6HawW]
*HabLab prep, 2 Dec 2011 - [http://www.youtube.com/watch?v=oYkWsYgxjlg&feature=plcp&context=C3ae3b99UAOEgsToPDskKbJkhlamk2eitaYlIV_vQB]
*Moving materials to HabLab site, 2 Dec 2011 - [http://www.youtube.com/watch?v=xBD31-euJko&feature=plcp&context=C3e52188UAOEgsToPDskIieqSu6fBKOClsHwb2ict6]
*Cutting roof metal, 2 Dec 2011 - [http://www.youtube.com/watch?v=Uvh-b8X1nMs&feature=plcp&context=C342b11cUAOEgsToPDskLPZ-OGyZwp5E-I84osQdxa]
*Sliding roof metal up, 2 Dec 2011 - [http://www.youtube.com/watch?v=wXtvmxG9CQM&feature=plcp&context=C30dc4deUAOEgsToPDskJ3YgfNKcHhVKPcdEg2It9u]
*Stepping stone for workshop, 7 Dec 2011 - [http://www.youtube.com/watch?v=U5QdsFsSw_g&feature=plcp&context=C3d8ba28UAOEgsToPDskJ85-eTaf0amjFEoR_-KDCc]
*Roof cement foundation coating, 7 Dec 2011 - [http://www.youtube.com/watch?v=6Og_xB02ILQ&feature=plcp&context=C3e85f63UAOEgsToPDskLlElazV7sR7zJikAh8Sxxv]
*Workshop columns beginning for real, 7 Dec 2011 - [http://www.youtube.com/watch?v=gKjdnxLzQec&feature=plcp&context=C373eadcUAOEgsToPDskK0CP5f70nMh9WwGit1UkGB]
*Laying CEB columns below zero, 7 Dec 2011 - [http://www.youtube.com/watch?v=Oq9VJiE103U&feature=plcp&context=C352f899UAOEgsToPDskJr1wkmtqlDbonjqWGA_DMW]
*Workshop walls subzero, 7 Dec 2011 - [http://www.youtube.com/watch?v=LBsHqkU0XIQ&feature=plcp&context=C3f4fad7UAOEgsToPDskK6DW1INuLswYZrGHEX5mWr]
*Window frames, 7 Dec 2011 - [http://www.youtube.com/watch?v=EjyRLEoeN4I&feature=plcp&context=C3c32ea0UAOEgsToPDskJCNAuLF6y1Vb1bGN1ahZFf]
*Tractor and wall build, 7 Dec 2011 - [http://www.youtube.com/watch?v=0Q9XiVbSCv0&feature=plcp&context=C3353e78UAOEgsToPDskKPd69xpKBP39oyqf87BTea]
*Walls and torch tables, 7 Dec 2011 - [http://www.youtube.com/watch?v=0C7kRv-X_t8&feature=plcp&context=C3ba0b8eUAOEgsToPDskLwVB_ASIBCn2S-6ukrayii]
*Bottom layer blocks, 8 Dec 2011 - [http://www.youtube.com/watch?v=iDolHTUxtN4&feature=plcp&context=C33cce78UAOEgsToPDskIHjZzP1cCoLhOexd2JiBgW]
*Bottom CEB layer and electrical integration into wall, 8 Dec 2011 - [http://www.youtube.com/watch?v=AwHi9AmV-qY&feature=plcp&context=C36f74b2UAOEgsToPDskJZYoNjk2PZMUV3Db42487V]
*HabLab dry-in beginning, 9 Dec 2011 - [http://www.youtube.com/watch?v=7F6m906Vn3M&feature=plcp&context=C3dfdc32UAOEgsToPDskJfFYV2Fjri3Wchpmw3wFUG]
*Grinder with diamond blade, 10 Dec 2011 - [http://www.youtube.com/watch?v=mkmlP5QASAY&feature=plcp&context=C307998cUAOEgsToPDskKZLMYEr0Fg4ZLhpd4UHAl1]
*HabLab steps towards roof, 10 Dec 2011 - [http://www.youtube.com/watch?v=mVVuRcMp8v8&feature=plcp&context=C3d7eebfUAOEgsToPDskKL7W27zPDo1JlFhfxb8CgU]
*Workshop wall detail, 11 Dec 2011 - [http://www.youtube.com/watch?v=RnkVb0xL0Ro&feature=plcp&context=C3cd5b0eUAOEgsToPDskKKeyhIjux7N-ep3R5f3F0x]
*Spraying bricks, 11 Dec 2011 - [http://www.youtube.com/watch?v=CZRbyPJAFxg&feature=plcp&context=C39ef0f6UAOEgsToPDskIQ1RUW55wfO28onoVPEIfe]
*Column laying technique, 11 Dec 2011 - [http://www.youtube.com/watch?v=GsiKdM546ts&feature=plcp&context=C33654d9UAOEgsToPDskJr1yqiP3PKYU1mNbyqT0JK]
*CEB walls coming up, 11 Dec 2011 - [http://www.youtube.com/watch?v=MW0OYO0aMEs&feature=plcp&context=C3c13ff8UAOEgsToPDskI62pT8dE4vwGkzTVR3XY40]
*Transit 101, 12 Dec 2011 - [http://www.youtube.com/watch?v=9cJ2vAnhbko&feature=plcp&context=C37c8530UAOEgsToPDskJHwyfq5Iqrt1aAE8JGGvks]
*HabLab materializing, 15 Dec 2011 - [http://www.youtube.com/watch?v=oESfQH6Xowc&feature=plcp&context=C391060bUAOEgsToPDskKa5nnpnkYOBfdoywzOwSm1]
*Rafters going on, 15 Dec 2011 - [http://www.youtube.com/watch?v=xJ5SxlA4HYk&feature=plcp&context=C3a91736UAOEgsToPDskIVN-GLbVUYyMVDzAnfxpRF]
*HabLab roof support, 15 Dec 2011 - [http://www.youtube.com/watch?v=WYHwxBL6dqE&feature=plcp&context=C3816e36UAOEgsToPDskKvkLrBNmsr_MOjhORXxNkc]


=True Fans Update=
=True Fans Update=
Line 551: Line 688:
*Yoonseo, 5 Nov 2011 - [http://www.youtube.com/watch?v=Z3BNZqqnZqo&feature=plcp&context=C319ad41UAOEgsToPDskJ1_plxXuDnYoaO3zZFra6N]
*Yoonseo, 5 Nov 2011 - [http://www.youtube.com/watch?v=Z3BNZqqnZqo&feature=plcp&context=C319ad41UAOEgsToPDskJ1_plxXuDnYoaO3zZFra6N]


=Business License=
=Business=


*OSE Certification, 3 Oct 2011 - [http://www.youtube.com/watch?v=A2h_qzPBJJw&feature=plcp&context=C3646959UAOEgsToPDskJBn0F8gABoj7Z948450NwF]
*OSE Certification, 3 Oct 2011 - [http://www.youtube.com/watch?v=A2h_qzPBJJw&feature=plcp&context=C3646959UAOEgsToPDskJBn0F8gABoj7Z948450NwF]
*Distributive Enterprise, 16 Dec 2011 - [http://www.youtube.com/watch?v=w75QqbktAmk&feature=plcp&context=C30712f5UAOEgsToPDskL_3b-Ib63ZeBZO1JxdRrbG]


=Misc.=
=Misc.=
Line 626: Line 764:
*Oct 18 Update, 18 Oct 2011 - [http://www.youtube.com/watch?v=mpJ2RvpCx_Y&feature=plcp&context=C33c391aUAOEgsToPDskIKudFWq2PS-sMogXwIwmmT]
*Oct 18 Update, 18 Oct 2011 - [http://www.youtube.com/watch?v=mpJ2RvpCx_Y&feature=plcp&context=C33c391aUAOEgsToPDskIKudFWq2PS-sMogXwIwmmT]
*Recovery plan on ceb construction, 20 Oct 2011 - [http://www.youtube.com/watch?v=dBQn3DJUaT0&feature=plcp&context=C302b353UAOEgsToPDskLDWtIeftKT1R7jri3jFBZY]
*Recovery plan on ceb construction, 20 Oct 2011 - [http://www.youtube.com/watch?v=dBQn3DJUaT0&feature=plcp&context=C302b353UAOEgsToPDskLDWtIeftKT1R7jri3jFBZY]
*Stabilized lime blocks, 1 Dec 2011 - [http://www.youtube.com/watch?v=u6HLSOjAqqk&feature=plcp&context=C3a874c2UAOEgsToPDskJUiGlARmG-ds5WBNFu7CRX]
*Oct 20 2011 update, 2 Dec 2011 - [http://www.youtube.com/watch?v=4XyvuB367rE&feature=plcp&context=C3e8f797UAOEgsToPDskLN2bdog4KtBAQ3PPAVLnev]
*Ian and Yoonseo, 2 Dec 2011 - [http://www.youtube.com/watch?v=YndnPWluIxo&feature=plcp&context=C3ab633aUAOEgsToPDskLWqDLB_918ZtmDpKpzCVbQ]
*Dirt and twigs to advanced civilization, 3 Dec 2011 - [http://www.youtube.com/watch?v=1gbXiB4GZJw&feature=plcp&context=C3996fa5UAOEgsToPDskLcgfesqL0Kuvw6Qx28nZpK]
*Open source CAD/CAM Solution, 10 Dec 2011 - [http://www.youtube.com/watch?v=fMmP_85yOWk&feature=plcp&context=C389773fUAOEgsToPDskKVzyb57kKv4b23zIKYufNb]
*Practical Post Scarcity: Open Source Solutions, 15 Dec 2011 - [http://www.youtube.com/watch?v=q9BW9E6omFQ&feature=plcp&context=C3bde0f0UAOEgsToPDskIETVqv-BejG84OWrhmRNit]


=Cement Mixer=
=Cement Mixer=

Revision as of 19:03, 19 December 2011

This is an index of videos which may be used to supplement remote video editing.

Construction 2011

  • Transit use during HabLab construction - with John Marlatt, carpenter - [1]
  • Towards HabLab roof - [2] - with Floyd Hagerman; discuss steps and time required for putting on roof
  • Bulldozing construction site for HabLab - [3]

LifeTrac Tractor

  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [4]
  • LifeTrac Walkthrough (15 Mar 2009), 15 Mar 2009 - [5]
  • more LifeTrac detail, 18 Mar 2009 - [6]
  • Augering Post and Planting Holes, 28 Apr 2009 - [7]
  • Loader Arms Adjustment, 11 Jun 2009 - [8]
  • Lifetrac Drive, 16 Apr 2011 - [9]
  • LifeTrack III, 16 Apr 2011 - [10]
  • Bending of Tracks for Tractor, 27 Aug 2011 - [11]
  • Lifetrac Erging from Cave, 7 Sep 2011 - [12]
  • LifeTrac Trimmed in Half, 11 Sep 2011 - [13]
  • Lifetrac to Bobcat Conversion Plate, 12 Sep 2011 - [14]
  • Midnight oil episode: lifetrac shipping, 26 Sep 2011 - [15]
  • Documenting Lifetrac with Ian, 26 Sep 2011 - [16]
  • How to get Lifetrac up?, 27 Sep 2011 - [17]
  • Loading Lifetrac, 27 Sep 2011 - [18]
  • Chaining Lifetrac up, 27 Sep 2011 - [19]
  • Lifetrac up!, 27 Sep 2011 - [20]
  • Lifetrac on trailer, 27 Sep 2011 - [21]
  • Ready to ship, 27 Sep 2011 - [22]
  • Lifetrac control valves, 27 Sep 2011 - [23]
  • LifeTrac Power Cube chokes, 27 Sep 2011 - [24]
  • LifeTrac shipping off, 27 Sep 2011 - [25]
  • Industry standard bulldozer, 28 Sep 2011 - [26]
    • Toothbar
      • Open Source Tooth Bar, 22 Oct 2008 - [27]
      • Toothbar bucket prototype 2, 23 Sep 2011 - [28]
  • Welding Lifetrac tracks, 3 Oct 2011 - [29]
  • Lifetrac Tracks design and jig comments, 3 Oct 2011 - [30]
  • Filling Tractor 2 with hydraulic fluid, 4 Oct 2011 - [31]
  • Motor control valve plumbing, 7 Oct 2011 - [32]
  • First FeF Hydraulic Hack, 7 Oct 2011 - [33]
  • Lifetrac 3 tracks, 10 Oct 2011 - [34]
  • Welding remaining mufflers, 15 Oct 2011 - [35]
  • Welding lifetarac mufflers, 15 Oct 2011 - [36]
  • Lifetrac motor coupler failure, 15 Oct 2011 - [37]
  • Power cube tabs connecting to tractor, 15 Oct 2011 - [38]
  • Bobcat to Lifetrac conversion plate, 20 Oct 2011 - [39]
  • Lifetrac shaft coupler, 21 Oct 2011 - [40]
  • Bobcat hydraulics conversion, 21 Oct 2011 - [41]
  • Bobcatto Lifetrac hydraulics step 2, 21 Oct 2011 - [42]
  • Step 3, 21 Oct 2011 - [43]
  • Step 4, 21 Oct 2011 - [44]
  • Step 5, 21 Oct 2011 - [45]
  • Step 6, 21 Oct 2011 - [46]
  • Step 7, 21 Oct 2011 - [47]
  • Step 8, 21 Oct 2011 - [48]
  • Step 8.5, 21 Oct 2011 - [49]
  • Step 9, 21 Oct 2011 - [50]
  • Part 10, 21 Oct 2011 - [51]
  • Pressure relief setting, 22 Oct 2011 - [52]
  • Case drain returns on tractor, 22 Oct 2011 - [53]
  • Power cube power and return, 22 Oct 2011 - [54]
  • Prototype 1 loader mounted cement mixer 2, 11 Nov 2011 - [55]
  • Prototype 1 loader mounted cement mixer, 11 Nov 2011 - [56]
  • Getting cement mixer going, 24 Nov 2011 - [57]
  • Lifetrac modification, 28 Nov 2011 - [58]
  • Lifetrac - dismounting wheels, 28 Nov 2011 - [59]
  • Bobcat exploded, 28 Nov 2011 - [60]
  • Bobcat explosion 1, 28 Nov 2011 - [61]
  • Bobcat to Lifetrac conversion plate, 1 Dec 2011 - [62]
  • Lifetrac moving rebar and bending table into place, 2 Dec 2011 - [63]
  • Lifetrac weight balancing, 2 Dec 2011 - [64]
  • Filling Lifetrac with gash, 2 Dec 2011 - [65]
  • Filling Lifetrac with gas, 2 Dec 2011 - [66]
  • Loading Lifetrac up, 2 Dec 2011 - [67]
  • Loading rebar, 2 Dec 2011 - [68]
  • Rebar load on tractor, 2 Dec 2011 - [69]
  • Loading rebar on tractor, 2 Dec 2011 - [70]
  • Bent rebar on tractor, 2 Dec 2011 - [71]
  • Lifetrac test drive, 2 Dec 2011 - [72]
  • Tractor Disassembly video, 4 Dec 2011 - [73]
  • Tractor in pieces, 7 Dec 2011 - [74]
  • Tractor and wall build, 7 Dec 2011 - [75]
  • Heater and tractor, 7 Dec 2011 - [76]
  • Cutting hussars for tractor wheels with a bandsaw, 9 Dec 2011 - [77]
  • Wellding Lifetrac wheel collars, 10 Dec 2011 - [78]
  • Shortening prototype 2 Lifetrac to make prototype 3, 11 Dec 2011 - [79]
  • Shortening prototype 2, 11 Dec 2011 - [80]
  • Towards Lifetrac 3, 11 Dec 2011 - [81]
  • Gap in Lifetrac 2, 11 Dec 2011 - [82]
  • Gap in Lifetrac 2 part 2, 11 Dec 2011 - [83]
  • Lifetrac 2 simple drive, 11 Dec 2011 - [84]
  • Tractor wheel valve hydraulics modification, 13 Dec 2011 - [85]
  • New Lifetrac hydraulic motor, 16 Dec 2011 - [86]

---

  • Power beyond port - hack - [87]

CEB

  • CEB Cyclinder Testing, 5 Nov 2007 - [88]
  • CEB Cylinder Mounting, 26 Nov 2007 - [89]
  • CEB Testing with Hopper, 26 Dec 2007 - [90]
  • Advanced Compressed Earth Block Press Fabrication, 18 Jan 2008 - [91]
  • CEB Cylinder Mounting Assembly Preparation, 18 Jan 2008 - [92]
  • CEB Press Plate Box, 18 Jan 2008 - [93]
  • Compressed Earth Block Press Press Plate Testing, 18 Jan 2008 - [94]
  • CEB Cylinder Mounting in Frame, 18 Jan 2008 - [95]
  • First Completed CEB Prototype Testing, 18 Jan 2008 - [96]
  • First CEB Block Ejected, 18 Jan 2008 - [97]
  • Factor e Live 8, Advanced CEB Press and Solar Panels, 3 Sep 2008 - [98]
  • (Factor e Live 10) CEB Field Testing, 16 Oct 2008 - [99]
  • Open Source CEB Press Production Test Runs, 5 Nov 2008 - [100]
  • CEB Brick Production Day 1, 9 Nov 2008 - [101]
  • 5000 Compressed Earth Bricks Pressed, 25 Nov 2008 - [102]
  • CEB field report - 5691 bricks pressed, 27 Nov 2008 - [103]
  • Populating the CEB addition, 29 Nov 2008 - [104]
  • CEB Plan B - Snow flurries, 30 Nov 2008 - [105]
  • First CEB Brick Laid, 2 Dec 2008 - [106]
  • First CEB Wall Section, 3 Dec 2008 - [107]
  • CEB Wall Growing, 8 Dec 2008 - [108]
  • Mounting the trusses on the CEB building, 11 Dec 2008 - [109]
  • CEB Addition Near Completion, 19 Dec 2008 - [110]
  • Factor e Live Distillations (part 5) The CEB Story - To Build a Village, 16 Jan 2009 - [111]
  • CEB, Hexacube, and Hexayurt, 23 Feb 2009 - [112]
  • Green Roof, 26 Feb 2009 - [113]
  • CEB Hopper Problem Statement, 26 Feb 2009 - [114]
  • Hexacube 2, 5 Mar 2009 - [115]
  • Liberator 2 function, 12 Apr 2009 - [116]
  • CEB controller testing with secondary cylinder, 18/12/11 - [117]
  • CEB Controller 2011, 27 Aug 2011 - [118]
  • Compression Chamber Quality Control, 1 Sep 2011 - [119]
  • CEB Hoppers, 6 Sep 2011 - [120]
  • Finising CEB Hoppers, 7 Sep 2011 - [121]
  • CEB Secondary Cylinder hydraulic Connection, 10 Sep 2011 - [122]
  • CEB needle valve, 19 Sep 2011 - [123]
  • Main CEB cylinder testing, 19 Sep 2011 - [124]
  • Full CEB Automation with Detroit Fab Lab Solenoid Drivers, 19 Sep 2011 - [125]
  • Speed control needle valve, 23 Sep 2011 - [126]
  • Ceb column foundation rebar, 24 Sep 2011 - [127]
  • CEB vault prototype, 28 Sep 2011 - [128]
  • 1 Squaring CEB Drawer, 2 Oct 2011 - [129]
  • 2 frame jig, 2 Oct 2011 - [130]
  • 3 fitting cylinder, 2 Oct 2011 - [131]
  • 4 frame and roller guide holes, 2 Oct 2011 - [132]
  • 5 frame jig turning, 3 Oct 2011 - [133]
  • 6 frame welding, 3 Oct 2011 - [134]
  • 7 making bolts, 3 Oct 2011 - [135]
  • 8 shims squaring drawer, 3 Oct 2011 - [136]
  • 9 squaring hyd cylinder, 3 Oct 2011 - [137]
  • 10 stretching the frame, 3 Oct 2011 - [138]
  • 11 torching sensor holes, 3 Oct 2011 - [139]
  • Controller wiring 1, 7 Oct 2011 - [140]
  • Controller wiring 2&3, 7 Oct 2011 - [141]
  • Controller wiring 4, 7 Oct 2011 - [142]
  • Controller 5, 7 Oct 2011 - [143]
  • Controller 6, 7 Oct 2011 - [144]
  • CEB finishing, 7 Oct 2011 - [145]
  • Placing CEB press in position, 20 Oct 2011 - [146]
  • Foundation plus positioning CEB in place, 21 Oct 2011 - [147]
  • outer members, 21 Oct 2011 - [148]
  • installing drawers, 22 Oct 2011 - [149]
  • properly installed drawers, 22 Oct 2011 - [150]
  • CEB Pressing setup, 22 Oct 2011 - [151]
  • Brick pressing under way, 27 Oct 2011 - [152]
  • Pressing - grate, 27 Oct 2011 - [153]
  • CEB microcontroller repair, 28 Oct 2011 - [154]
  • Solenoid driver replacement, 28 Oct 2011 - [155]
  • Saturday the 29th pressing, 29 Oct 2011 - [156]
  • CEB slurry preparation, 4 Nov 2011 - [157]
  • Nov 12 pressing, 12 Nov 2011 - [158]
  • Bridging, 12 Nov 2011 - [159]
  • Meeting of the CEB presses, 12 Nov 2011 - [160]
  • Forking pallets of bricks, 12 Nov 2011 - [161]
  • Bricks on pallets, 12 Nov 2011 - [162]
  • Powell machine, 12 Nov 2011 - [163]
  • Pressing scene, 12 Nov 2011 - [164]
  • Moving Powell Machine on the scene, 13 Nov 2011 - [165]
  • Press Meeting, 13 Nov 2011 - [166]
  • Press on trailer, 13 Nov 2011 - [167]
  • Column laying tutorial with Yoonseo, 13 Nov 2011 - [168]
  • Moving lumber for roof boxes, 14 Nov 2011 - [169]
  • Moving lumber for roofs, 14 Nov 2011 - [170]
  • Preparing to build columns, 14 Nov 2011 - [171]
  • Reinforcing main compression chamber, 14 Nov 2011 - [172]
  • CEB press- fitting cracked, 16 Nov 2011 - [173]
  • CEB Construction Review, 16 Nov 2011 - [174]
  • 2 CEB presses in action, 24 Nov 2011 - [175]
  • Brick city, 24 Nov 2011 - [176]
  • Windrows of soil, 24 Nov 2011 - [177]
  • Reject lime soil amendment, 24 Nov 2011 - [178]
  • From pulverizer to brick, 25 Nov 2011 - [179]
  • Pulverizer munching soil, 25 Nov 2011 - [180]
  • From pulverizer to brick line, 25 Nov 2011 - [181]
  • Reject Lime Blocks, 25 Nov 2011 - [182]
  • Column prototype, 25 Nov 2011 - [183]
  • 1600 bricks on October 18, 25 Nov 2011 - [184]
  • Loading soil without pulverizer, 25 Nov 2011 - [185]
  • Loading hopper straight from loader bucket, 26 Nov 2011 - [186]
  • Shaker function, 26 Nov 2011 - [187]
  • 1 minute of pressing, 26 Nov 2011 - [188]
  • 1 minute pressing 2, 26 Nov 2011 - [189]
  • Perfect day for pressing bricks, 26 Nov 2011 - [190]
  • Another minute of pressing - 6" tall bricks, 26 Nov 2011 - [191]
  • Shaker and stacking, 26 Nov 2011 - [192]
  • Loading soil without pulverizer, 26 Nov 2011 - [193]
  • Shaker detail, 26 Nov 2011 - [194]
  • Shaker shaking soil down ceb machine, 26 Nov 2011 - [195]
  • Another minute, 26 Nov 2011 - [196]
  • Brick city November 28, 28 Nov 2011 - [197]
  • One minute of 4" bricks, 28 Nov 2011 - [198]
  • Another minute and shaker, 28 Nov 2011 - [199]
  • Reinforcing CEB compression chamber, 28 Nov 2011 - [200]
  • Brick pressing and roller setup, 28 Nov 2011 - [201]
  • Brick mudding and laying, 28 Nov 2011 - [202]
  • Replacing solenoid driver board on CEB controller, 29 Nov 2011 - [203]
  • James Slade on shaker motor safety plate, 1 Dec 2011 - [204]
  • Ceb press brick rollers, 1 Dec 2011 - [205]
  • Rollers coming off the production line, 2 Dec 2011 - [206]
  • Dec 2 last Day pressing, 2 Dec 2011 - [207]
  • Meeting on CEB preparation october, 2 Dec 2011 - [208]
  • Taking CEB press apart for documentation, 4 Dec 2011 - [209]
  • CEB solenoid driver - surface mount 1, 5 Dec 2011 - [210]
  • CEB solenoid driver - surface mount - part 2, 5 Dec 2011 - [211]
  • Surface mount part 3, 5 Dec 2011 - [212]
  • Surface mount part 4, 6 Dec 2011 - [213]
  • Surface mount part 5, 6 Dec 2011 - [214]
  • Surface mount part 6, 6 Dec 2011 - [215]
  • Surface mount part 7, 6 Dec 2011 - [216]
  • Surface mount part 8, 6 Dec 2011 - [217]
  • Surface mount part 9, 6 Dec 2011 - [218]
  • Surface mount part 10, 6 Dec 2011 - [219]
  • Surface mount part 11, 6 Dec 2011 - [220]
  • Surface mount part 12, 6 Dec 2011 - [221]
  • Surface mount part 13, 6 Dec 2011 - [222]
  • Surface mount part 14, 6 Dec 2011 - [223]
  • Surface mount part 15, 6 Dec 2011 - [224]
  • Surface mount part 16, 7 Dec 2011 - [225]
  • Surface mount part 17, 7 Dec 2011 - [226]
  • Surface mount part 18, 7 Dec 2011 - [227]
  • Surface mount part 19, 7 Dec 2011 - [228]
  • Surface mount part 20, 7 Dec 2011 - [229]
  • Surface mount part 21, 7 Dec 2011 - [230]
  • Laying CEB columns below zero, 7 Dec 2011 - [231]
  • Workshop walls subzero, 7 Dec 2011 - [232]
  • Tractor and wall build, 7 Dec 2011 - [233]
  • Workshop wall detail, 11 Dec 2011 - [234]
  • Spraying bricks, 11 Dec 2011 - [235]
  • Column laying technique, 11 Dec 2011 - [236]
  • CEB walls coming up, 11 Dec 2011 - [237]
  • CEB Disassembly documentation, 11 Dec 2011 - [238]

---

  • roller setup - [239]
  • Grate modification - [240]
  • Reinforcing compression chamber - [241]
  • Shaker in action - [242]
  • Controller board etching playlist - [243]

Professional Opinions

  • CEB Construction Review, 16 Nov 2011 - [244]
  • Covering the Workshop, 22 Nov 2011 - [245]
  • Floyd on structure stability, 22 Nov 2011 - [246]
  • Next steps on roof with John the carpenter, 22 Nov 2011 - [247]
  • Anchoring The roof in, 23 Nov 2011 - [248]
  • Workshop alignment, 25 Nov 2011 - [249]
  • Roof on mid of next week, 25 Nov 2011 - [250]
  • Reject Lime Blocks, 25 Nov 2011 - [251]
  • Column prototype, 25 Nov 2011 - [252]
  • Perfect day for pressing bricks, 26 Nov 2011 - [253]
  • Fredrick Emmons, 28 Nov 2011 - [254]
  • Stabilized lime blocks, 1 Dec 2011 - [255]
  • Steam Auto Club of America visits Factor e Farm, 8 Dec 2011 - [256]
  • Steam Generator, 8 Dec 2011 - [257]
  • Wally Munster modern steam engine, 8 Dec 2011 - [258]
  • Burning smoke for a clean flame, 8 Dec 2011 - [259]
  • HabLab steps towards roof, 10 Dec 2011 - [260]
  • Workshop wall detail, 11 Dec 2011 - [261]
  • Spraying bricks, 11 Dec 2011 - [262]
  • Column laying technique, 11 Dec 2011 - [263]
  • HabLab roof support, 15 Dec 2011 - [264]

Solar

  • Solar Panel Construction 1, 21 Jul 2008 - [265]
  • Solar Panel Construction 2, 21 Jul 2008 - [266]
  • Solar Panel Construction 3, 21 Jul 2008 - [267]
  • Factor e Live 8, Advanced CEB Press and Solar Panels, 3 Sep 2008 - [268]
  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [269]

Digging

  • Rotary Hydraulic Well Digging, 3 Apr 2008 - [270]
  • Digging a Well Part 2, 6 Aug 2008 - [271]
  • Augering Post and Planting Holes, 28 Apr 2009 - [272]

Rototiller/Soil Pulverizer

  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [273]
  • Soil pulverizer prototype 3, 22 Sep 2011 - [274]
  • Pulverizer stop angle mod, 22 Sep 2011 - [275]
  • Soil Pulverizer prototype 3 complete, 23 Sep 2011 - [276]
  • Soil Pulverizer prototype 3 welding, 23 Sep 2011 - [277]
  • Loading soil Pulverizer - mower, 3 Oct 2011 - [278]
  • Soil Pulverizer prototype 3, 8 Oct 2011 - [279]
  • Bobcat meets pulverizer, 20 Oct 2011 - [280]
  • Soil Pulverizer on bobcat, 20 Oct 2011 - [281]
  • Pulverizer mounts on bobcat, 20 Oct 201 - [282]
  • Soil pulverizer field testing report, 24 Nov 2011 - [283]
  • From pulverizer to brick, 25 Nov 2011 - [284]
  • Pulverizer munching soil, 25 Nov 2011 - [285]
  • From pulverizer to brick line, 25 Nov 2011 - [286]
  • Reject Lime Blocks, 25 Nov 2011 - [287]
  • Loading soil without pulverizer, 25 Nov 2011 - [288]
  • Loading soil without pulverizer, 25 Nov 2011 - [289]
  • Loading hopper straight from loader bucket, 26 Nov 2011 - [290]
  • Soil pulverizer overview, 29 Nov 2011 - [291]
  • Moving soil pulverizer into shop, 29 Nov 2011 - [292]
  • Bobcat conversion plate mounts pulverizer, 1 Dec 2011 - [293]
  • Pulverizer Disassembly, 12 Dec 2011 - [294]


Biodiesel Reactor

  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [295]

Open Source Backhoe

  • Open Source Backhoe, 19 Oct 2008 - [296]
  • Open Source Tooth Bar, 22 Oct 2008 - [297]

Digital Fabrication

  • HydraRaptor, 6 Apr 2009 - [298]
  • HydraRaptor (part 2), 7 Apr 2009 - [299]
  • Detroit fab lab solenoid driver, 22 Sep 2011 - [300]

Torch Table

  • Torch Table finishing 1 - 16 Apr 2011 - [301]
  • Torch table with faulty Xylotex controller, 17 May 2011 - [302]
  • CNC Torch Table Tip height, 11 Sep 2011 - [303]
  • Cnc torch table height adjustment, 10 Dec 2011 - [304]


Power Cube

  • Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [305]
  • Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [306]
  • Power Cube Frames, 7 Sep 2011 - [307]
  • Power Cube Welding with 90 Amp MIG Welder, 10 Sep 2011 - [308]
  • Power Cube Fabrication Step 1, 11 Sep 2011 - [309]
  • Power Cube Fabrication Step 2, 11 Sep 2011 - [310]
  • Power Cube Fabrication Step 3, 11 Sep 2011 - [311]
  • Power Cube Fabrication Step 4, 11 Sep 2011 - [www.youtube.com/watch?v=_h9LPdWWq9A&feature=plcp&context=C3008e42UAOEgsToPDskKjwYcrDbde2YMuk3QTk4to]
  • Power Cube Fabrication Step 5 - Clamping, 11 Sep 2011 - [312]
  • Briggs and Stratton Interim Power Cube 27 hp Engine Leak, 10 Sep 2011 - [313]
  • Leak part 1, 11 Sep 2011 - [314]
  • Leak part 2, 11 Sep 2011 - [315]
  • Leak part 3, 11 Sep 2011 - [316]
  • Battery container welding, 12 Sep 2011 - [317]
  • Hydraulic Cooler Mounting, 12 Sep 2011 - [318]
  • The Memorial Tom Griffing Power Cube, 12 Sep 2011 - [319]
  • Power Cube Extending Plates, 12 Sep 2011 - [320]
  • Tacking battery mounts, 12 Sep 2011 - [321]
  • Key and throttle mounts, 12 Sep 2011 - [322]
  • Battery Mount Cutting, 12 Sep 2011 - [323]
  • Torching motor mount plate shaft hole, 12 Sep 2011 - [324]
  • Assembly order review for power cube, 12 Sep 2011 - [325]
  • Power Cube Power Switch, 13 Sep 2011 - [326]
  • Hydraulic Cooler mount bolt locations, 13 Sep 2011 - [327]
  • Kohler Engine mounting in PC, 14 Sep 2011 - [328]
  • Hydraulic cooler mount overview, 14 Sep 2011 - [329]
  • Kohler 25 hp mounting hint, 14 Sep 2011 - [330]
  • Hydraulic cooler mounting and bolts, 14 Sep 2011 - [331]
  • Kohler engine mounting nightmares, 14 Sep 2011 - [332]
  • Tightening Kohler engine bolts, 14 Sep 2011 - [333]
  • Notice on hydraulic pump mounting, 14 Sep 2011 - [334]
  • Fan mounting, 14 Sep 2011 - [335]
  • Pump mounting bolts size, 14 Sep 2011 - [336]
  • Fan trim for power cube, 14 Sep 2011 - [337]
  • Power Cube component measurements, 14 Sep 2011 - [338]
  • Engine to pump coupling overview, 14 Sep 2011 - [339]
  • Mounts and bolts for fans, 14 Sep 2011 - [340]
  • Pump mount plate detail, 14 Sep 2011 - [341]
  • Last dilemma of 25 hp Kohler mounting, 14 Sep 2011 - [342]
  • Tacking hydraulic cooler in place, 14 Sep 2011 - [343]
  • Tacking hydraulic cooler in place part 2, 14 Sep 2011 - [344]
  • Pump Mounting refinement, 15 Sep 2011 - [345]
  • Preferred engine mounting, 15 Sep 2011 - [346]
  • Engine insertion into frame, 15 Sep 2011 - [347]
  • Engine mounting lifetime design strategy, 15 Sep 2011 - [348]
  • Pump bolt detail, 15 Sep 2011 - [349]
  • Pump mounting with 4.5"x3/4" bolts, 16 Sep 2011 - [350]
  • Loose pump, 16 Sep 2011 - [351]
  • Welding pump plates to engine plates, 16 Sep 2011 - [352]
  • Power Cube production line, 16 Sep 2011 - [353]
  • Fan Attachment, 17 Sep 2011 - [354]
  • Fan mount bolt pattern - welding, 17 Sep 2011 - [355]
  • Fan bolt specs, 17 Sep 2011 - [356]
  • Protecting bolt threads, 17 Sep 2011 - [357]
  • Starter switch wiring on power cube, 20 Sep 2011 - [358]
  • Irregular fan mounts, 22 Sep 2011 - [359]
  • Dangling Power, 23 Sep 2011 - [360]
  • Kohler starter solenoid nut, 24 Sep 2011 - [361]
  • Filling power cube with hydraulic fluid, 24 Sep 2011 - [362]
  • LifeTrac Power Cube chokes, 27 Sep 2011 - [363]
  • Filling Tractor 2 with hydraulic fluid, 4 Oct 2011 - [364]
  • Filling power cube, 4 Oct 2011 - [365]
  • Muffler design, 5 Oct 2011 - [366]
  • Tack Welding cooler mounts, 7 Oct 2011 - [367]
  • Pump mounting variations, 7 Oct 2011 - [368]
  • Torching mount plates for motor on power cube, 7 Oct 2011 - [369]
  • Battery mount cutting, 7 Oct 2011 - [370]
  • Tacking battery mounts, 7 Oct 2011 - [371]
  • Power Cube wiring 2, 15 Oct 2011 - [372]
  • Power cube tabs connecting to tractor, 15 Oct 2011 - [373]
  • Case drain returns on tractor, 22 Oct 2011 - [374]
  • Power cube power and return, 22 Oct 2011 - [375]
  • Welding battery tabs, 2 Dec 2011 - [376]
  • Kohler mount - 2" longer, 3 Dec 2011 - [377]
  • Fitting issues on Kohler engine, 3 Dec 2011 - [378]


Dimensional Sawmill

  • Dimensional Sawmill Part 1, 10 Sep 2011 - [379]
  • Dimensional Sawmill Part 2, 10 Sep 2011 - [380]
  • Dimensional Sawmill Part 3, 10 Sep 2011 - [381]
  • Dimensional Sawmill Part 4, 10 Sep 2011 - [382]
  • Open Source dimensional sawmill fabrication interview, 12 Sep 2011 - [383]

-Prototyping costs of dimensional sawmill, 22 Sep 2011 - [384] -Sawmill z, 22 Sep 2011 - [385] -Sawmill 1, 7 Dec 2011 - [386] -Sawmill 2, 7 Dec 2011 - [387] -Sawmill 3, 7 Dec 2011 - [388]


Factor e Live

  • Factor e Live, 2 Jun 2008 - [389]
  • Factor e Live Week 2, 18 Jun 2008 - [390]
  • Factor e Live - Part 3, 1 Jul 2008 - [391]
  • Couldn't find part 4.
  • Factor e Live - Part 5, 17 Aug 2008 - [392]
  • Factor e Live - Part 6, Solar Turbine Beginnings, 18 Aug 2008 - [393]
  • Factor e Live - Episode 7, 25 Aug 2008 - [394]
  • (Factor e Live 8) Advanced CEB Press and Solar Panels, 3 Sep 2008 - [395]
  • (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [396]
  • (Factor e Live 10) CEB Field Testing, 16 Oct 2008 - [397]

Factor e Live Distillations

  • Factor e Live Distillations (part 1), 5 Jan 2009 - [398]
  • Factor e Live Distillations (part 2), 7 Jan 2009 - [399]
  • Factor e Live Distillations (part 3) Towards the Open Source Tractor, 12 Jan 2009 - [400]
  • Factor e Live Distillations (part 4) On the technology base for Evolving to Freedom, 13 Jan 2009 - [401]
  • Factor e Live Distillations (part 5) The CEB Story - To Build a Village, 16 Jan 2009 - [402]
  • Factor e Live Distillations (part 6) Personal Fabrication Machines, 20 Jan 2009 - [403]
  • Factor e Live Distillations (part 7) Open Source Permaculture and Local Food Systems (part 7), 25 Jan 2009 - [404]
  • Factor e Live Distillations (part 8) $1/Watt Solar Thermal Concentrator Steam Powered Electric Generator, 3 Feb 2009 - [405]
  • Factor e Live Distillations (part 9) Open Collaborative Development, 5 Feb 2009 - [406]
  • Factor e Live Distillations (part 10) Open Economic Model, 6 Feb 2009 - [407]
  • Factor e Live Distillations - Post Scarcity Village, 10 Sep 2009 - [408]

TED Talks Event: Behind the Scenes

  • Suzanne Lee's Kombucha Clothing, 27 Feb 2011 - [409]
  • Meet a TED Fellow, 27 Feb 2011 - [410]
  • Fellows Reception, 27 Feb 2011 - [411]
  • Putting on makeup part 1, 28 Feb 2011 - [412]
  • Putting on makeup part 2, 28 Feb 2011 - [413]
  • Putting on makeup part 3, 28 Feb 2011 - [414]
  • Random Ted Talks Clip Part 1, 28 Feb 2011 - [415]
  • Random Ted Talks Clip Part 2, 28 Feb 2011 - [416]
  • Random Ted Talks Clip Part 3, 2 Mar 2011 - [417]
  • Random Ted Talks Clip Part 4, 4 Mar 2011 - [418]
  • A Ted Talks Presentation - who?, 4 Mar 2011 - [419]
  • Interview Lesa Mitchell, Kauffman Foundation, 2 Mar 2011 - [420]
  • Interview with Rufus? Who? 4 Mar 2011 - [421]
  • After TED Talks Update, 6 Mar 2011 - [422]
  • TED Talk - Global Village Construction Set, 6 Oct 2011 - [423]

CNC Lathe

  • Open Source CNC Lathe, 12 Sep 2011 - [424]
  • Lathe conversion to hydraulics, 12 Dec 2011 - [425]


Baling/Hay Making

  • Preparation for baling, 2 Oct 2011 - [426]
  • Docenting the baling documentor, 2 Oct 2011 - [427]
  • Mower ate a round bale, 2 Oct 2011 - [428]
  • Stumped, 2 Oct 2011 - [429]
  • Random Shot of Old Hay Baler, 11 Sep 2011 - [430]
  • Hay conditioner 101, 2 Oct 2011 - [431]
  • Meet the hay conditioner, 2 Oct 2011 - [432]
  • HabLab and mowing for bales, 3 Oct 2011 - [433]
  • Baling ergonomics, 5 Oct 2011 - [434]
  • Countdown to baling, 5 Oct 2011 - [435]
  • Baling day 1, 5 Oct 2011 - [436]
  • Getting ready to bale, 5 Oct 2011 - [437]
  • Baler adjustment, 5 Oct 2011 - [438]
  • Engaging the baler, 5 Oct 2011 - [439]
  • PTO engaged, 5 Oct 2011 - [440]
  • Straw quality, 5 Oct 2011 - [441]
  • First bale, 5 Oct 2011 - [442]
  • Baling shakedown in progress, 5 Oct 2011 - [443]
  • Baling 1, 5 Oct 2011 - [444]
  • Baling 2, 5 Oct 2011 - [445]
  • Baling 3, 5 Oct 2011 - [446]
  • Baling 4, 5 Oct 2011 - [447]
  • Baling 5, 5 Oct 2011 - [448]
  • Baling 6, 5 Oct 2011 - [449]
  • Baling 7, 5 Oct 2011 - [450]
  • Baling 8, 6 Oct 2011 - [451]
  • Baling 9, 6 Oct 2011 - [452]
  • Baling day 1 summary, 6 Oct 2011 - [453]
  • Baling results - day 2, 6 Oct 2011 - [454]
  • On trailer to pick up bales, 7 Oct 2011 - [455]
  • Picking up bales, 7 Oct 2011 - [456]
  • Documentor on bales, 7 Oct 2011 - [457]
  • 90 bales in 20' trailer, 7 Oct 2011 - [458]
  • Stacking strawbales, 7 Oct 2011 - [459]
  • Temporary bale structure, 7 Oct 2011 - [460]
  • Temporary bale structure floor, 7 Oct 2011 - [461]
  • Floor coming together, 7 Oct 2011 - [462]
  • 8 minutes to build a platform, 7 Oct 2011 - [463]
  • Beginning to stack bales on platform, 7 Oct 2011 - [464]
  • Temporary bale structure, 7 Oct 2011 - [465]
  • Picking up bales, 7 Oct 2011 - [466]
  • Picking up bales 2, 7 Oct 2011 - [467]
  • Dropping off bales, 7 Oct 2011 - [468]

Construction Planning 2011

  • Construction planning 1, 12 Oct 2011 - [469]
  • Construction planning 2, 10 Oct 2011 - [470]

Workshop/HabLab

  • Workshop excavation, 27 Sep 2011 - [471]
  • Column excavation ergonomic analysis, 27 Sep 2011 - [472]
  • Excavation workflow and ergonomics, 27 Sep 2011 - [473]
  • Roof stringer structural testing plan, 27 Sep 2011 - [474]
  • Pre-construction scene, 28 Sep 2011 - [475]
  • Preconstruction with dozer, 28 Sep 2011 - [476]
  • Preconstruction with dozer 2, 28 Sep 2011 - [477]
  • Excavator beginning, 28 Sep 2011 - [478]
  • Gravel spreading, 28 Sep 2011 - [479]
  • HabLab 1 - bulldozing, 28 Sep 2011 - [480]
  • HabLab 2, 28 Sep 2011 - [481]
  • HabLab 3, 28 Sep 2011 - [482]
  • HabLab 4, 28 Sep 2011 - [483]
  • HabLab 5, 28 Sep 2011 - [484]
  • Gravel base with skid loader, 28 Sep 2011 - [485]
  • Gravel trucks, 28 Sep 2011 - [486]
  • HabLab documentor, 28 Sep 2011 - [487]
  • Riding the Cat D7 dozer, 28 Sep 2011 - [488]
  • Cat D7 bulldozer fuel consumption, 28 Sep 2011 - [489]
  • HabLab excavation, 28 Sep 2011 - [490]
  • HabLab bulldozing view from Hexayurt, 28 Sep 2011 - [491]
  • HabLab excavator and dozer, 28 Sep 2011 - [492]
  • HabLab corner excavation, 28 Sep 2011 - [493]
  • Foundation pads- night before concrete pour, 30 Sep 2011 - [494]
  • Column foundation forms, 30 Sep 2011 - [495]
  • Excavation discussions, 1 Oct 2011 - [496]
  • Nearly finished grading, 1 Oct 2011 - [497]
  • Clearing off vegetation, 1 Oct 2011 - [498]
  • Dozer parking, 2 Oct 2011 - [499]
  • Starting the dozing, 2 Oct 2011 - [500]
  • Beginning to clear vegetation, 2 Oct 2011 - [501]
  • More clearing vegetation, 2 Oct 2011 - [502]
  • Excavator documentor, 2 Oct 2011 - [503]
  • HabLab and mowing for bales, 3 Oct 2011 - [504]
  • Concrete pads 101, 4 Oct 2011 - [505]
  • Cement truck arrives, 4 Oct 2011 - [506]
  • Ergonomic analysis of excavation, 5 Oct 2011 - [507]
  • Screeing foundation pads, 5 Oct 2011 - [508]
  • Living units- wall foundation pour, 13 Oct 2011 - [509]
  • Rebar for HabLab, 13 Oct 2011 - [510]
  • Preparing for wall foundations, 13 Oct 2011 - [511]
  • HabLab rebar and embodied energy, 14 Oct 2011 - [512]
  • HabLab foundations panorama, 14 Oct 2011 - [513]
  • Ready to pour HabLab foundations, 14 Oct 2011 - [514]
  • Pour panorama, 14 Oct 2011 - [515]
  • Little dry, 14 Oct 2011 - [516]
  • 8 cubic yards, 14 Oct 2011 - [517]
  • Beginning to pour, 14 Oct 2011 - [518]
  • Pour sock, 14 Oct 2011 - [519]
  • Floating, 14 Oct 2011 - [520]
  • Moving rebar to HabLab site, 14 Oct 2011 - [521]
  • Pouring panorama, 15 Oct 2011 - [522]
  • Workshop Slab, 4 Nov 2011 - [523]
  • Concrete slab joints cutting, 5 Nov 2011 - [524]
  • Release cut ergonomics, 5 Nov 2011 - [525]
  • Workshop columns growing, 5 Nov 2011 - [526]
  • Saturday the 29th pressing, 29 Oct 2011 - [527]
  • CEB slurry preparation, 4 Nov 2011 - [528]
  • Nov 12 pressing, 12 Nov 2011 - [529]
  • Bridging, 12 Nov 2011 - [530]
  • Meeting of the CEB presses, 12 Nov 2011 - [531]
  • Forking pallets of bricks, 12 Nov 2011 - [532]
  • Bricks on pallets, 12 Nov 2011 - [533]
  • Powell machine, 12 Nov 2011 - [534]
  • Pressing scene, 12 Nov 2011 - [535]
  • Moving Powell Machine on the scene, 13 Nov 2011 - [536]
  • Press Meeting, 13 Nov 2011 - [537]
  • Press on trailer, 13 Nov 2011 - [538]
  • Column laying tutorial with Yoonseo, 13 Nov 2011 - [539]
  • Moving lumber for roof boxes, 14 Nov 2011 - [540]
  • Moving lumber for roofs, 14 Nov 2011 - [541]
  • Preparing to build columns, 14 Nov 2011 - [542]
  • Covering the Workshop, 22 Nov 2011 - [543]
  • Floyd on structure stability, 22 Nov 2011 - [544]
  • Next steps on roof with John the carpenter, 22 Nov 2011 - [545]
  • Monday morning workshop construction, 22 Nov 2011 - [546]
  • Anchoring The roof in, 23 Nov 2011 - [547]
  • Workshop roof preparation, 24 Nov 2011 - [548]
  • Temporary posts, 24 Nov 2011 - [549]
  • Brick city, 24 Nov 2011 - [550]
  • Leveling workshop frame, 24 Nov 2011 - [551]
  • Workshop skeleton, 24 Nov 2011 - [552]
  • Strawbales and shop, 24 Nov 2011 - [553]
  • Workshop alignment, 25 Nov 2011 - [554]
  • Putting roof sections on workshop, 25 Nov 2011 - [555]
  • Roof sections lean on roof, 25 Nov 2011 - [556]
  • Roof on mid of next week, 25 Nov 2011 - [557]
  • Monday 21st November construction scene, 25 Nov 2011 - [558]
  • Column prototype, 25 Nov 2011 - [559]
  • 1600 bricks on October 18, 25 Nov 2011 - [560]
  • First use of workshop, 27 Nov 2011 - [561]
  • Workshop+James Slade, 28 Nov 2011 - [562]
  • Moving roof boxes on, 28 Nov 2011 - [563]
  • Moving roof boxes, 28 Nov 2011 - [564]
  • Brick city November 28, 28 Nov 2011 - [565]
  • Pushing roof sections onto workshop, 28 Nov 2011 - [566]
  • Monday morning workshop construction, 28 Nov 2011 - [567]
  • Unloading plywood and framing, 28 Nov 2011 - [568]
  • Roof metal beginning to go on, 1 Dec 2011 - [569]
  • Roof going up, 1 Dec 2011 - [570]
  • Thursday Dec 1, 1 Dec 2011 - [571]
  • On the roof, 2 Dec 2011 - [572]
  • Roof going on, 2 Dec 2011 - [573]
  • Sliding roof panels up, 2 Dec 2011 - [574]
  • HabLab prep, 2 Dec 2011 - [575]
  • Moving materials to HabLab site, 2 Dec 2011 - [576]
  • Cutting roof metal, 2 Dec 2011 - [577]
  • Sliding roof metal up, 2 Dec 2011 - [578]
  • Stepping stone for workshop, 7 Dec 2011 - [579]
  • Roof cement foundation coating, 7 Dec 2011 - [580]
  • Workshop columns beginning for real, 7 Dec 2011 - [581]
  • Laying CEB columns below zero, 7 Dec 2011 - [582]
  • Workshop walls subzero, 7 Dec 2011 - [583]
  • Window frames, 7 Dec 2011 - [584]
  • Tractor and wall build, 7 Dec 2011 - [585]
  • Walls and torch tables, 7 Dec 2011 - [586]
  • Bottom layer blocks, 8 Dec 2011 - [587]
  • Bottom CEB layer and electrical integration into wall, 8 Dec 2011 - [588]
  • HabLab dry-in beginning, 9 Dec 2011 - [589]
  • Grinder with diamond blade, 10 Dec 2011 - [590]
  • HabLab steps towards roof, 10 Dec 2011 - [591]
  • Workshop wall detail, 11 Dec 2011 - [592]
  • Spraying bricks, 11 Dec 2011 - [593]
  • Column laying technique, 11 Dec 2011 - [594]
  • CEB walls coming up, 11 Dec 2011 - [595]
  • Transit 101, 12 Dec 2011 - [596]
  • HabLab materializing, 15 Dec 2011 - [597]
  • Rafters going on, 15 Dec 2011 - [598]
  • HabLab roof support, 15 Dec 2011 - [599]

True Fans Update

  • Dear True Fans: Production Scaling, 18 Sep 2011 - [600]
  • Dear True Fans September 25, 2011, 25 Sep 2011 - [601]
  • Full Steam Ahead - $60k construction grant is in, 28 Sep 2011 - [602]
  • Monday Update, 3 Oct 2011 - [603]

Team Member Interviews

  • Isaiah Saxon, 11 Mar 2011 - [604]
  • Dan Granett, 11 Mar 2011 - [605]
  • Brianna Kufa, 24 Aug 2011 - [606]
  • Chris, 24 Aug 2011 - [607]
  • Tom, 24 Aug 2011 - [608]
  • Ian Conehead, 7 Oct 2011 - [609]
  • Ted Mosher dedicated project visit, 7 Oct 2011 - [610]
  • Yoonseo, 5 Nov 2011 - [611]

Business

  • OSE Certification, 3 Oct 2011 - [612]
  • Distributive Enterprise, 16 Dec 2011 - [613]

Misc.

  • Heat Exchanger, 2 Nov 2007 - [614]
  • Cordwood Addition Roof, 9 Dec 2007 - [615]
  • Goat Birth, 1 May 2008 - [616]
  • Walnut Grafting, 4 May 2008 - [617]
  • Babington Burner "Flamethrower" Atomizing Oil, 1 Oct 2008 - [618]
  • Babington Burner "Flamethrower" Continued, 2 Oct 2008 - [619]
  • Open Source On-Demand Water Heater, 2 Nov 2008 - [620]
  • Torch Table Day 1, 10 Dec 2008 - [621]
  • Ama Makes the Goat Feeder, 20 Feb 2009 - [622]
  • Starting the workshop stove for the first time, 1 Mar 2009 - [623]
  • Fruit Propagation Workshop, 1 Mar 2009 - [624]
  • Future Kitchen, 2 Mar 2009 - [625]
  • Making Notebooks, 6 Mar 2009 - [626]
  • Grafting and Root Cuttings Details, 7 Mar 2009 - [627]
  • Spring Rains, 16 Mar 2009 - [628]
  • Hexahatch Incubator, 4 Apr 2009 - [629]
  • Industry Standard Cooking Video, 11 Apr 2009 - [630]
  • Goat Birth, 16 Apr 2009 - [631]
  • Compressed Air Water Pump Design, 10 Jun 2009 - [632]
  • Cutting Rocks, 16 Mar 2011 - [633]
  • Workshop Addition Complete, 28 Mar 2011 - [634]
  • Video of a Wind Turbine, 31 Mar 2011 [635]
  • Polish TV Interview, 5 Apr 2011 - [636]
  • Random Polish TV Interview Member Clip, 5 Apr 2011 - [637]
  • Random Pig Video, 5 Apr 2011 - [638]
  • Random Train Ride Clip, 5 Apr 2011 - [639]
  • Random HD Sample, 11 Apr 2011 - [640]
  • New Welder: Megamig 450, 16 Apr 2011 - [641]
  • Welder Testing, 16 Apr 2011 - [642]
  • Xylotex Controller Configuration, 16 Apr 2011 - [643]
  • Remote Sensing, 17 May 2011 - [644]
  • Wheel shaft gussets, 19 Jun 2011 - [645]
  • Bandsaw, 19 Jun 2011 - [646]
  • Project Update, 4 Aug 2011 - [647]
  • Power to Solenoid, 12 Aug 2011 - [648]
  • Ergonomics of Cleaning Tank Bungs Prior to Welding, 1 Sep 2011 - [649]
  • Fabrication of 5 Fuel and Hydraulic Tanks, 2 Sep 2011 - [650]
  • Tapping threaded holes on Engine, 2 Sep 2011 - [651]
  • Meeting On Friday, 2 Sep 2011 - [652]
  • Grate Shaker Assembly, 3 Sep 2011 - [653]
  • Suction Strainer, 6 Sep 2011 - [654]
  • True Fans Sunday Update 2, 11 Sep 2011 - [655]
  • Shonda, CNC Multimachine, and the Housing Crisis, 12 Sep 2011 - [656]
  • HabLab - Margaret Ida, 12 Sep 2011 - [657]
  • Natural resources to product, 12 Sep 2011 - [658]
  • Last prep for construction Update, 12 Sep 2011 - [659]
  • Last prep for construction - loading up, 12 Sep, 2011 - [660]
  • Stringers/Wood Beams for OSE Workshop 2011, 13 Sep 2011 - [661]
  • KHS Class of 1991 Reunion, 14 Sep 2011 - [662]
  • Roof sections for ose shop, 15 Sep 2011 - [663]
  • Emergency Construction Funding - Major Success Update, 15 Sep 2011 - [664]
  • Global supply chains, 15 Sep 2011 - [665]
  • Chickens going freerange, 17 Sep 2011 - [666]
  • Staking worksop space for earthworks, 20 Sep 2011 - [667]
  • Urban Farming Guys, James Slade replications, 22 Sep 2011 - [668]
  • Column foundation rebar, 22 Sep 2011 - [669]
  • New Update: Toothbar bucket, tractor tracks, and dimensional sawmill bl, 23 Sep 2011 - [670]
  • Random Update: Monday midnight oil update, 28 Sep 2011 - [671]
  • 12 foot peach tree, 2 Oct 2011 - [672]
  • Pecan apricot catalpa, 2 Oct 2011 - [673]
  • Secondary cylinder, 2 Oct 2011 - [674]
  • Message to Jason Fields, 3 Oct 2011 - [675]
  • Pawpaw Tree, 5 Oct 2011 - [676]
  • Shonda - CNC Multimachine beginnings, 8 Oct 2011 - [677]
  • GVCS Kickstarter intro video, 13 Oct 2011 - [678]
  • Oct 15 update, 15 Oct 2011 - [679]
  • Shuttleworth Fellowship Brief, 17 Oct 2011 - [680]
  • Oct 18 Update, 18 Oct 2011 - [681]
  • Recovery plan on ceb construction, 20 Oct 2011 - [682]
  • Stabilized lime blocks, 1 Dec 2011 - [683]
  • Oct 20 2011 update, 2 Dec 2011 - [684]
  • Ian and Yoonseo, 2 Dec 2011 - [685]
  • Dirt and twigs to advanced civilization, 3 Dec 2011 - [686]
  • Open source CAD/CAM Solution, 10 Dec 2011 - [687]
  • Practical Post Scarcity: Open Source Solutions, 15 Dec 2011 - [688]

Cement Mixer

  • Loader mounted cement mixer, 26 Nov 2011 - [689]
  • Cement mixer in action, 26 Nov 2011 - [690]
  • Mixer lid closed, 26 Nov 2011 - [691]
  • Loading cement mixer, 26 Nov 2011 - [692]
  • Attaching mixer to bobcat, 26 Nov 2011 - [693]
  • Intro on cement mixer, 26 Nov 2011 - [694]

Documentation

  • Documentation evolving, 7 Oct 2011 - [695]
  • Remote technical documentation strategy, 22 Oct 2011 - [696]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Marcin_ose_YouTube_Video_Content&oldid=48564"