CEB/Gen3/BOM: Difference between revisions
< CEB
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Steel Order List= | =Steel Order List= | ||
To be sourced from any local metal shop. | |||
<html><iframe width='625' height='300' frameborder='0' src='https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AtAVl-K5-trVdDZZaGZKWjZXZHhmVnVQdzYtWTVzb0E&single=true&gid=0&output=html'></iframe> | <html><iframe width='625' height='300' frameborder='0' src='https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AtAVl-K5-trVdDZZaGZKWjZXZHhmVnVQdzYtWTVzb0E&single=true&gid=0&output=html'></iframe> | ||
</html><br/> | </html><br/> | ||
Revision as of 17:58, 23 December 2011
Steel Order List
To be sourced from any local metal shop.
Link to printable page.
Hydraulics
Link to printable page.
Fasteners
Link to printable page.
Steel Cut List
- Cut the steel into the following lengths.
- Label and separate cuts by "Make Page" number so you can easily find cuts for each step during the fabrication stage.
- Note: Item Number and part number refer to CAD information. This is un-necessary if you are following the fabrication steps listed.
Link to printable page.