Cold Saw/V1 Design Parameters/Drive System: Difference between revisions
Jump to navigation
Jump to search
| Line 27: | Line 27: | ||
=Shaft Coupling= | =Shaft Coupling= | ||
*'''Outside Diameter: | *'''Outside Diameter: 51.4mm''' | ||
*'''Bore: 31.8mm''' | *'''Bore: 31.8mm''' | ||
Revision as of 00:43, 21 May 2012
Hydraulic Motor
- Mount Hole Pattern: 40mm x 100mm
- Mount Hole Diameter: 12.7mm
Interface Plate
- Length: 200mm
- Width: 75mm
- Thickness: 25mm
- Motor Mount Hole Spacing Along Length: 20mm, 120mm
- Motor Mount Hole Spacing Along Width: 20mm, 60mm
- Motor Mount Hole: 12mm
- Interfacing Hole Spacing Along Length: 150mm, 180mm
- Interfacing Hole Spacing Along Width: 20mm, 60mm
- Interface Hole: M12
Shaft Coupling
- Outside Diameter: 51.4mm
- Bore: 31.8mm
- Length: 75mm
- Setscrew Hole Diameter: (4mm Hex)
- Setscrew Hole Spacing Along Length: 25mm
Inside Plate
Outside Plate
Spindle
- Outside Diameter: 1.25"
- Length: XX
Blade
- Bore: 1.25"
- Diameter: XX