Cold Saw/V1 Design Parameters/Support System: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 8: Line 8:




*'''
*'''Support Shaft Hole Diameter: 31.8mm'''
 
*'''Support Shaft Hole Spacing Along Length: 37.5mm'''
 
*'''Support Shaft Hole Spacing Along Height: 50mm'''
 
 
*'''Mount Hole Diameter: 12mm'''
 
*'''Mount Hole Spacing Along Length: 10mm, 65mm'''
 
*'''Mount Hole Spacing Along Width:25mm'''


=Support Bar=
=Support Bar=

Revision as of 01:59, 21 May 2012

Shaft Block

  • Length: 75mm
  • Width: 50mm
  • Height: 75mm


  • Support Shaft Hole Diameter: 31.8mm
  • Support Shaft Hole Spacing Along Length: 37.5mm
  • Support Shaft Hole Spacing Along Height: 50mm


  • Mount Hole Diameter: 12mm
  • Mount Hole Spacing Along Length: 10mm, 65mm
  • Mount Hole Spacing Along Width:25mm

Support Bar

  • Length: 150mm
  • Width: 75mm
  • Thickness: 25mm


  • Mount Hole Diameter: 31.8mm
  • Mount Hole Spacing Along Length: 30mm
  • Mount Hole Spacing Along Width: 40mm


  • Interface Hole Diameter: 12mm
  • Interface Hole Spacing Along Length: 90mm, 120mm
  • Inteface Hole Spacing Along Width: 20mm, 60mm

Bridge Bar

  • Length: 50mm
  • Width: 75mm
  • Thickness: 25mm

Support Shaft

  • Length: 200mm
  • Diameter: 31.8mm

Support Shaft Collar

  • Length: 30mm
  • Outside Diameter: 60mm
  • Bore: 31.8mm
  • Setscrew Type: M12
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Parameters/Support_System&oldid=62907"