Cold Saw/V1 Design Parameters/Drive System

Hydraulic Motor

• Mount Hole Pattern: 40mm x 100mm

• Mount Hole Diameter: 12.7mm

Surplus Center Information

Interface Plate

• Length: 230mm

• Width: 75mm

• Thickness: 25mm

• Drive Hole Diameter: 40mm

• Drive Hole Spacing Along Length: 70mm

• Drive Hole Spacing Along Width: 40mm

• Motor Mount Hole Spacing Along Length: 20mm, 120mm

• Motor Mount Hole Spacing Along Width: 20mm, 60mm

• Motor Mount Hole: 12mm

• Interfacing Hole Spacing Along Length: 180mm, 210mm

• Interfacing Hole Spacing Along Width: 20mm, 60mm

• Interface Hole: M12

Shaft Coupling

• Outside Diameter: 51.4mm

• Bore: 31.8mm

• Length: 75mm

• Setscrew Hole Diameter: 6.8mm

• Setscrew Hole Thread: M8x1.25

• Setscrew Hole Spacing Along Length: 25mm

Inside Plate

• Length: 75mm

• Width: 75mm

• Thickness: 12.7mm

• Drive Hole Spacing: 37.5mm, 37.5mm

• Pinhole Pattern from center: XXmm, XXmm

Outside Plate

• Length: 75mm

• Width: 75mm

• Thickness: 12.7mm

• Drive Hole Spacing: 37.5mm, 37.5mm

• Pinout Pattern from center: XXmm, XXmm

Spindle

• Outside Diameter: 31.8mm"

• Length: 75mm

• End Thread Length: 25mm

• End Thread: 1-1/4", 7 TPI

Blade

• Bore: 31.8mm"

• Diameter: 254mm

• Pinhole Pattern from center: XXmm, XXmm