Cold Saw/V1 Design Parameters/Drive System: Difference between revisions
Jump to navigation
Jump to search
(→Pin) |
|||
| Line 38: | Line 38: | ||
=Shaft Coupling= | =Shaft Coupling= | ||
*'''Outside Diameter: | *'''Outside Diameter: 50.8mm''' | ||
*'''Bore: 32mm''' | *'''Bore: 32mm''' | ||
| Line 45: | Line 45: | ||
*'''Setscrew Hole Diameter: 6.8mm | *'''Setscrew Hole Diameter: 6.8mm''' | ||
*'''Setscrew Hole Thread: M8x1.25''' | *'''Setscrew Hole Thread: M8x1.25''' | ||
*'''Setscrew Hole Spacing Along Length: 25mm''' | *'''Setscrew Hole Spacing Along Length: 25mm''' | ||
=Drive Setscrew= | |||
*'''Thread: M8x1.25''' | |||
*'''Length: 10mm''' | |||
=Blade Mount Disc= | =Blade Mount Disc= | ||
Revision as of 23:56, 22 May 2012
Hydraulic Motor
- Mount Hole Pattern: 40mm x 100mm
- Mount Hole Diameter: 12.7mm
Interface Plate
- Length: 230mm
- Width: 75mm
- Thickness: 25mm
- Drive Hole Diameter: 40mm
- Drive Hole Spacing Along Length: 70mm
- Drive Hole Spacing Along Width: 40mm
- Motor Mount Hole Spacing Along Length: 20mm, 120mm
- Motor Mount Hole Spacing Along Width: 20mm, 60mm
- Motor Mount Hole: 12mm
- Interfacing Hole Spacing Along Length: 180mm, 210mm
- Interfacing Hole Spacing Along Width: 20mm, 60mm
- Interface Hole: M12
Shaft Coupling
- Outside Diameter: 50.8mm
- Bore: 32mm
- Length: 75mm
- Setscrew Hole Diameter: 6.8mm
- Setscrew Hole Thread: M8x1.25
- Setscrew Hole Spacing Along Length: 25mm
Drive Setscrew
- Thread: M8x1.25
- Length: 10mm
Blade Mount Disc
- Shape: Round Plate
- Outside Diameter: 100mm
- Inside Diameter: 32mm
- Thickness: 12.7mm
- Number of Pinholes: 2
- Pinhole Diameter: 8mm
- Pinhole Distance from Center: 45mm
Pin
- Diameter: 8mm
- Length: 50mm
Spindle
- Outside Diameter: 31.8mm"
- Length: 75mm
- End Thread Length: 25mm
- End Thread: 1-1/4", 7 TPI
Spindle Nut
- Thread: 1-1/4", 7 TPI
- Outside Diameter: XXmm
- Width: XXmm
Blade
- Bore: 32mm"
- Diameter: 254mm
- Thickness: 3mm
- Number of Pinholes: 2
- Pinhole Diameter: 8mm
- Pinhole Distance from Center: 45mm