Cold Saw/V1 Design Parameters/Drive System: Difference between revisions
Jump to navigation
Jump to search
| Line 105: | Line 105: | ||
*'''Thread: 1-1/4", 7 TPI''' | *'''Thread: 1-1/4", 7 TPI''' | ||
*''' | *'''Width: 27mm''' | ||
*''' | *'''Height: 47.6mm''' | ||
=Blade= | =Blade= | ||
Revision as of 00:20, 23 May 2012
Hydraulic Motor
- Length: 222.25mm
- Width (excluding mounting section): XXmm
- Height: XXmm
- Mount Hole Pattern: 40mm x 100mm
- Mount Hole Diameter: 12.7mm
Interface Plate
- Length: 230mm
- Width: 75mm
- Thickness: 25mm
- Drive Hole Diameter: 40mm
- Drive Hole Spacing Along Length: 70mm
- Drive Hole Spacing Along Width: 40mm
- Motor Mount Hole Spacing Along Length: 20mm, 120mm
- Motor Mount Hole Spacing Along Width: 20mm, 60mm
- Motor Mount Hole: 12mm
- Interfacing Hole Spacing Along Length: 180mm, 210mm
- Interfacing Hole Spacing Along Width: 20mm, 60mm
- Interface Hole: M12
Shaft Coupling
- Outside Diameter: 50.8mm
- Bore: 32mm
- Length: 75mm
- Setscrew Hole Diameter: 6.8mm
- Setscrew Hole Thread: M8x1.25
- Setscrew Hole Spacing Along Length: 25mm
Drive Setscrew
- Thread: M8x1.25
- Length: 10mm
Blade Mount Disc
- Shape: Round Plate
- Outside Diameter: 120mm
- Inside Diameter: 32mm
- Thickness: 12.7mm
- Number of Pinholes: 2
- Pinhole Diameter: 8mm
- Pinhole Distance from Center: 45mm
Pin
- Diameter: 8mm
- Length: 50mm
Spindle
- Outside Diameter: 31.8mm"
- Length: 75mm
- End Thread Length: 25mm
- End Thread: 1-1/4", 7 TPI
- Length Into Shaft Coupling: XXmm
Spindle Nut
- Thread: 1-1/4", 7 TPI
- Width: 27mm
- Height: 47.6mm
Blade
- Bore: 32mm"
- Diameter: 254mm
- Thickness: 3mm
- Number of Pinholes: 2
- Pinhole Diameter: 8mm
- Pinhole Distance from Center: 45mm