Telecommunication: Difference between revisions
Jump to navigation
Jump to search
| Line 18: | Line 18: | ||
*Router firmware: [http://www.polarcloud.com/tomato Tomato] | *Router firmware: [http://www.polarcloud.com/tomato Tomato] | ||
*Base router's settings: | |||
'''Basic''' | |||
Network: PPPoE | |||
DHCP Server: Enabled; 192.168.1.100 to 192.168.1.199 | |||
Router IP Address: 192.168.1.1 | |||
Subnet Mask: 255.255.255.0 | |||
*Boost routers' settings: | |||
'''Basic''' | |||
Network: Disabled | |||
DHCP Server: Disabled | |||
Router IP Address: 192.168.1.3 (second router); 192.168.1.4 (third router) | |||
Subnet Mask: 255.255.255.0 | |||
=Replication= | =Replication= | ||
Revision as of 22:54, 31 May 2012
Infrastructure
Our telecommunication infrastructure consists of:
- 1 coaxial cable connected to the hardware of our Internet Service Provider (ISP)
- 1 modem
- 3 WRT54GL routers (Source)
- 2 outdoor waterproof direct burial Cat5e cables (200ft each) (Source)
Hardware Setup
Software Setup
- Router firmware: Tomato
- Base router's settings:
Basic
Network: PPPoE
DHCP Server: Enabled; 192.168.1.100 to 192.168.1.199
Router IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
- Boost routers' settings:
Basic
Network: Disabled
DHCP Server: Disabled
Router IP Address: 192.168.1.3 (second router); 192.168.1.4 (third router)
Subnet Mask: 255.255.255.0