Electronics Workstation: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 56: | Line 56: | ||
=Circuit Board Testing= | =Circuit Board Testing= | ||
=Battery Charging= | |||
*NiMH: Set power supply at 1.2V with current limit depending on the battery's capacity (ex. if 2500mAh, then set current limit at 2.5A) | |||
Revision as of 19:51, 8 June 2012
Power
- CSI3005x5: Benchtop Power Supply Source
Soldering
- Hakko FX 888: Soldering Station Source
- Solder [Source]
- Flux [Source
Thermal Transfer
- Wagner HT1000: 1200W Heat Gun Source
Air Safety
- Carbon Filters Source
- Fan Source
- 12V Power Supply Source
Signal Analysis
- Oscilloscope Source
Connection and Insulation
- Shrink Tubing Source
- Connectors
- Fuses Source
- Light Duty Switch Source
Discrete Electrical Components
- Resistors Source
- Capacitors Source
Holders
- Helping Hands with Magnifier Source
Wires
Extension Cords
Circuit Board Testing
Battery Charging
- NiMH: Set power supply at 1.2V with current limit depending on the battery's capacity (ex. if 2500mAh, then set current limit at 2.5A)