Uploads by Calligarov
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 11:40, 1 February 2022 | ScrewM3x8.png (file) |  |
17 KB | 1 | |
| 11:40, 1 February 2022 | ScrewM3x8.FCStd (file) |  |
10 KB | 1 | |
| 11:39, 1 February 2022 | NutM6.png (file) |  |
12 KB | 1 | |
| 11:38, 1 February 2022 | NutM6.FCStd (file) | |
10 KB | 1 | |
| 11:37, 1 February 2022 | ScrewM6x25.png (file) |  |
11 KB | 1 | |
| 11:37, 1 February 2022 | ScrewM6x25.FCStd (file) | |
10 KB | 1 | |
| 11:29, 1 February 2022 | R7SLamp.png (file) |  |
3 KB | 1 | |
| 11:28, 1 February 2022 | R7SLamp.FCStd (file) | |
3 KB | 1 | |
| 11:27, 1 February 2022 | ScrewM3x25.png (file) |  |
8 KB | 1 | |
| 11:27, 1 February 2022 | ScrewM3x25.FCStd (file) | |
10 KB | 1 | |
| 11:25, 1 February 2022 | R7SLampHolder.png (file) |  |
7 KB | 1 | |
| 11:24, 1 February 2022 | R7SLampHolder.FCStd (file) | |
8 KB | 1 | |
| 11:22, 1 February 2022 | SetScrewM6x10.png (file) |  |
14 KB | 1 | |
| 11:21, 1 February 2022 | SetScrewM6x10.FCStd (file) | |
9 KB | 1 | |
| 11:18, 1 February 2022 | ScrewM6x18.png (file) |  |
14 KB | 1 | |
| 11:17, 1 February 2022 | ScrewM6x18.FCStd (file) | |
10 KB | Made using [https://wiki.freecad.org/Fasteners_Workbench FreeCAD Fasteners Workbench] | 1 |
| 10:49, 1 February 2022 | D3D Universal 3 v.21.06 Link.FCStd (file) | |
83 KB | First upload | 1 |
| 10:48, 1 February 2022 | D3D Universal 3 v.21.06.png (file) |  |
45 KB | 1 | |
| 12:02, 27 June 2021 | 35teeth100pitchSprocket.png (file) |  |
8 KB | 1 | |
| 12:01, 27 June 2021 | 35teeth100pitchSprocket.fcstd (file) | |
633 KB | =Notes= Drawn using OpenSCAD, Sprocket Generator and considering a 3" shaft. OpenSCAD code (dimensions in mm): sprocket(35,19.05,31.75,17.58,0); Note also that the OD is 14,64". =For BOM= https://www.usarollerchain.com/100A35-Sprocket-A-Plate-... | 1 |
| 12:00, 27 June 2021 | 17teeth100pitchSprocket.png (file) |  |
9 KB | 1 | |
| 11:59, 27 June 2021 | 17teeth100pitchSprocket.fcstd (file) | |
303 KB | =Notes= Drawn using OpenSCAD, Sprocket Generator and considering 1-7/8" shaft. OpenSCAD code (dimensions in mm): sprocket(17,19.05,31.75,17.58,0); Note also that the OD is 7.44". =For BOM= https://www.usarollerchain.com/100A17-Sprocket-A-Plate... | 1 |
| 17:20, 17 June 2021 | Utu assy2.png (file) |  |
56 KB | 2 | |
| 14:48, 9 May 2021 | FrameCover.png (file) |  |
5 KB | 1 | |
| 14:47, 9 May 2021 | FrameCover.fcstd (file) | |
6 KB | First upload. cover with basic dimensions, needs to add all the bolts holes and else | 1 |
| 18:02, 12 April 2021 | TrackDrive.png (file) |  |
17 KB | 2 | |
| 17:58, 12 April 2021 | TrackDrive.fcstd (file) | |
261 KB | Updated bearings, track sprocket and shaft, added set screws, keys and coupler | 2 |
| 17:56, 12 April 2021 | 1inch875DriveShaft.png (file) |  |
6 KB | 2 | |
| 17:56, 12 April 2021 | 1inch875DriveShaft.fcstd (file) | |
66 KB | Added keyways and set screws holes for coupler and bearings | 2 |
| 15:46, 11 April 2021 | TrackIdler.png (file) |  |
17 KB | 2 | |
| 14:13, 11 April 2021 | 1inch875IdlerShaft.png (file) |  |
8 KB | 3 | |
| 14:12, 11 April 2021 | 1inch875IdlerShaft.fcstd (file) | |
60 KB | Added set screw hole for coupler and keyway | 4 |
| 18:10, 10 April 2021 | TrackSprocketCoupler.png (file) |  |
13 KB | 1 | |
| 18:09, 10 April 2021 | TrackSprocketCoupler.fcstd (file) | |
45 KB | 1 | |
| 18:09, 10 April 2021 | BigDriveSprocket.png (file) |  |
8 KB | 6 | |
| 18:08, 10 April 2021 | BigDriveSprocket.fcstd (file) | |
155 KB | Updated setting bore diameter to 1-7/8" | 5 |
| 16:25, 28 March 2021 | 1inch875Bearing.png (file) |  |
17 KB | 2 | |
| 16:25, 28 March 2021 | 1inch875Bearing.fcstd (file) | |
94 KB | Added set screw hole | 2 |
| 12:28, 28 March 2021 | MotorDrive.png (file) |  |
23 KB | 3 | |
| 11:56, 28 March 2021 | EXT-M598WMB.png (file) |  |
22 KB | 3 | |
| 11:03, 28 March 2021 | SmallDriveSprocket.png (file) |  |
9 KB | 2 | |
| 11:03, 28 March 2021 | SmallDriveSprocket.fcstd (file) | |
103 KB | Redrawn to have a bore usable for assemblies | 2 |
| 15:55, 21 March 2021 | ShaftSprocketCoupler.png (file) |  |
9 KB | 4 | |
| 15:53, 21 March 2021 | ShaftSprocketCoupler.fcstd (file) | |
4 KB | Cut by 1/2 Height | 4 |
| 19:28, 15 March 2021 | TrackSprocket.png (file) |  |
9 KB | 1 | |
| 19:28, 15 March 2021 | TrackSprocket.fcstd (file) | |
68 KB | Made using FreeCAD PartDesign InvoluteGear, like the small and big drive sprockets | 1 |
| 14:14, 15 March 2021 | DriveChain.png (file) |  |
30 KB | 2 | |
| 14:07, 15 March 2021 | DriveChain.fcstd (file) | |
65 KB | Redrawn path sketch adding the non-parallel links. Moved the origin point so that the rotation axis of the big drive sprocket is the X axis. Added links according to the sketch | 2 |
| 19:26, 3 March 2021 | 100PitchChain.fcstd (file) | |
15 KB | 1 | |
| 19:26, 3 March 2021 | 100PitchChain.png (file) |  |
11 KB | 1 |
