Structural Power Cube

Introduction

The Power Cube, if placed into its own structural frame, can become a structural module that can be integrated readily within the LifeTrac Construction Set. The structural frame enables stacking of Power Cubes so their power can be combined.

Status

Prototypes have been developed, but they were larger than expected. A new design has been developed and is being finalized now (July 2014). This design will be used to build two prototypes and parts are already being ordered for this build.

This design has the following features:

• 8 x 8 x 8 Structural frame
• Built-in pressure relief control
• Interconnect port for equalizing hydraulic fluid in reservoirs
• Easy access to tanks for checking/filling fluids

Files

The original Structural Power Cube design used horizontal tanks, but the new "Vertical" design simplifies the design and packages it into a smaller frame.

Sketchup (Latest): File:PCSF vert.skp

Sketchup (Original): File:Structural PC.skp

Assembly

The Structural Power Cube is comprised of modules. Each module can be built separately, which simplifies fabrication. The modules are:

• Control Panel
• Engine
• Frame
• Fuel Tank
• Hydraulic Reservoir
• Pump
• Wiring Harness

Each module can be fabricated separately, then combined for the final assembly.

The module are detailed below: