Bill of Materials

Universal Rotor (Factor e Farm)
Small lathe chuck (Factor e Farm)
1.5"x14"x1" hydraulic cylinder (Factor e Farm)
Coupler - to go from 1-7/8 shaft to 1-1/4" shaft. 2" long on wider side, 1" long on narrower side
[2] 3/8"x4"x6" angle, 44" long - verticals
[4] 1/4"x1" angle, 20" long - rails for holding universal rotor to prevent it from twisting
[2] 3/8"x4"x6" angle, 12" long
[1] 3/4" threaded rod, 8"; [4] nuts - for top-facing end of cylinder
[1] 3/4" threaded rod, 6"; [4] nuts - for bottom-facing end of cylinder

Drill Press