CEB Research 2015
Jump to navigation
Jump to search
CEB Press Research 2015 for CEB Rev 4.3 Build VI
CEB_Press_Molds Interchangable Press Molds This was addressed in
Increasing production rate; Enlarging the press to produce multiple blocks per cycle increases the production rate. Video example HydraForm V2LE
Eliminatethe shaker components. - steeper hopper sides - different hopper to press geometry - load with auger or conveyor
Insulating CEB (lightweight too) Consider mixing as much as 70% perlite, styrofoam or other closed cell insulator into the soil mix. This could be tested with one or two blocks pressed with various ratios and various products, then testing the results
Soil Mixer