Power Cube v16.8

From Open Source Ecology
Revision as of 02:35, 7 September 2016 by Tom Griffing (talk | contribs)
Jump to navigation Jump to search

Development

Published the latest design in Sketchup below

Power Cube 16.8

This design has had few updates lately. Here are the latest updates: 

Aug 2016: Twin 18HP engine design in the works - mostly complete, will be built in the September Power Cube workshop

Snapshot: Hydraulic ports - 2 3/4" male outputs from the top of the pumps, 2 3/4" female returns and 1 1/4" low pressure return.

PC16.8HydraulicPorts.png Hydraulic Ports

Shapshot: Suction plumbing: Use 2 suction strainers and separate hoses to pumps, as reservoir ports are only 1 1/4" and these suction strainers are only rated at 8GPM each.

PC16.8SuctionPlumbing.png Suction Plumbing

Question

How should corners be formed and welded for optimal strength? Here is one image of a corner, with one of the horizontal members in the corner and the others welded to it:

PC16.8Corner.png Corner

Should the orientation be the same for all 8 corners?

Should we employ any special grinding / welding procedures for the one weld where all three members meet?

Files

This is the 16.8 release. See file revision history for other versions.

Bill Of Materials (BOM): Power Cube BOM

Power Cube Working Document: ["https://docs.google.com/NEWURL"]

Wiring Diagram: File:PC16.8WiringDiagram.dia Wiring Diagram

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Power_Cube_v16.8&oldid=143962"