Part Library for the Raspberry Pi Tablet

Working Doc

edit

Part Library

• 

  Tablet Final Assembly - FreeCAD -File:Raspiassy.fcstd

• 

  Raspberry Pi in case. - FreeCAD -File:Piincase.fcstd

• 

  TouchScreenPrimitive - size:nullkb - FreeCAD -File:TouchScreenPrimitive.fcstd

• 

  Raspberry Pi 4 Board - FreeCAD -File:Raspi.fcstd

• 

  1 Battery Power Pack - FreeCAD -File:1batpack.fcstd

• 

  5 Battery Power Pack - FreeCAD -File:5batpack.fcstd. FreeCAD -File:5batpack.stl

• 

  PiTabletConcept - FreeCAD -File:PiTabPrimitive.fcstd

• 

  Pi Base + External Ports WIP - size:nullkb - FreeCAD -File:PiboardandMount.fcstd

Add-On Modules

1. Cordless welder battery pack that also serves as a long-life battery add-on

Build

• Parts start - [1]

Software

Based on the NOOBS install: https://www.raspberrypi.org/downloads/noobs/

SD card must be FAT formatted, at least 8GB and preferably 16GB: https://www.raspberrypi.org/documentation/installation/noobs.md

It's handy to have a usb keyboard and mouse to navigate the install process once the prepared SD card is on the rPi.

Cura

I had issues trying to run Cura on the Raspbian, it kept crashing. It seems like someone has compiled a version and posted it in the ultimaker forums that will run on the RPi processor: https://community.ultimaker.com/topic/28746-experimental-cura-build-for-raspberry-pi-4-now-available/

Downloads: https://www.dropbox.com/sh/s43vqzmi4d2bqe2/AAADdYdSu9iwcKa0Knqgurm4a?dl=0

Install procedure: Once the appimage file is downloaded (I used Cura-mb-master-armhf-20191209.AppImage), make the file executable
> chmod +x Cura-mb-master-armhf-20191209.AppImage

Then you just need to run the app image file:
> ./Cura-mb-master-armhf-20191209.AppImage

Camera

From https://projects.raspberrypi.org/en/projects/getting-started-with-picamera/3

Once it's plugged in, Camera just needs to be toggled on in the config -> "interfaces"

Once restarted, you can take a picture like this:
> raspistill -o Desktop/image.jpg

This will activate the camera module and show a view finder, until you hit "Enter" and it saves a picture to the specified location.