CEB Modeling
Jump to navigation
Jump to search
Introduction
This page is dedicated to visual and performance modeling of the Liberator, OSE's open source, high-performance CEB press.
Finite Element Analysis
Calculation Symmetry
Bolt Strength
Bolt torquing can be measured by a torque wrench:
Starting to create the 3D model from previous sketches provided. We should take a look at using square washers on the back of the channels, they help to apply the forces evenly on the bolts and structure.
Marcin, I see from the video that you provided that you have modified the chamber to use a 1/4 plate on the side. What was your reasoning?