CEB Press/Manufacturing Instructions/Linked Extension Cord

Tools

• Straight Pattern Tin Snips

• 16AWG-compatible Wire Strippers

• Soldering Set

Materials

• [1] 15m (approximately 50ft) , 16AWG Extension Cord

• [1] Insulated Female 16-22AWG Quick-Connector

Steps

• Cut the extension cord such that the male plug cord is approximately 1m long.

• Strip the loose sleeves of the male plug cord and the female plug cord by about 30cm in order to expose the 3 wires: white, black, green.

• Cut the green wire for both the male and female plug cords where the stripped sleeve ends

• Strip the white and black wires of the male plug cord by 1.5cm.

• Crimp a female quick-connect to the now-exposed white wire of the male plug cord

• Strip the white and black wires of the female plug cord by 2.5cm.

• Insert the alligator clips' coloured sleeves into the female plug cord's black and white wires.

• Solder alligator clips to the white and black wires of the female plug cord.

• Link the male and female plug cords together by their plugs.