CNCCMV2/Structure/Techniques

From Open Source Ecology

< CNCCMV2‎ | Structure

Revision as of 23:01, 24 April 2012 by YK (talk | contribs) (→‎Match Drilling)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Point Marking with Datum Points and Edges

Datum points and edges are points and edges of the workpiece that you measure from.

In most cases, 2 datum edges will be used. How to measure using 2 datum edges is shown in the diagram below.

Match Drilling

Set 2 components one on top of the other, mount securely, then drill through both pieces at the same time for exact matching accuracy.

Match drilling works effectively with templates

Match drilling works effectively for pieces before they are cut apart

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CNCCMV2/Structure/Techniques&oldid=60377"