Electronics Workstation
Jump to navigation
Jump to search
Power
- CSI3005x5: Benchtop Power Supply Source
Soldering
- Hakko FX 888: Soldering Station Source
- Solder [Source]
- Flux [Source
Thermal Transfer
- Wagner HT1000: 1200W Heat Gun Source
Air Safety
- Carbon Filters Source
- Fan Source
- 12V Power Supply Source
Signal Analysis
- Oscilloscope Source
Connection and Insulation
- Shrink Tubing Source
- Connectors
- Fuses Source
- Light Duty Switch Source
Discrete Electrical Components
- Resistors Source
- Capacitors Source
Holders
- Helping Hands with Magnifier Source
Wires
Extension Cords
Circuit Board Testing
Battery Charging
- NiMH: Set power supply at 1.2V with current limit depending on the battery's capacity (ex. if 2500mAh, then set current limit at 2.5A). For multiple batteries, connect the batteries in parallel then set the current limit based on the battery set's capacity (ex. if 30,000mAh, then set current limit at 30A).