User:Paulne

From Open Source Ecology

Revision as of 21:28, 13 July 2013 by Paulne (talk | contribs) (Created page with "Plasma Torch Ramps 1.4 Heater circuit to be used for oxygen solenoid. Connector is a 6 terminal screw terminal block. Uses bare wire for connection. Solenoid voltage must be ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Plasma Torch

Ramps 1.4 Heater circuit to be used for oxygen solenoid. Connector is a 6 terminal screw terminal block. Uses bare wire for connection. Solenoid voltage must be same as stepper voltage supplied to ramps board. Typically 12 or 24 volts DC. Media:180px-RAMPS1-3 6pos.JPG

Retrieved from "https://wiki.opensourceecology.org/index.php?title=User:Paulne&oldid=100759"