Buildlog.net 2.x Laser

From Open Source Ecology
Revision as of 23:57, 2 March 2011 by Conor (talk | contribs)
Jump to navigation Jump to search

This page was tagged as a candidate for deletion. If this page does not meet our criteria for deletion, please remove this notice.

(Explanation: use breadcrumbs instead)

Main > Digital Fabrication > RepLab Tools > Laser cutter

The second generation open source laser cutter/engraver design from buildlog.net is complete. The new machine is called the Buildlog.net 2.x Laser. The name comes from the fact that this is the second generation machine and it is basically a 2 axis design. The third, vertical axis, is manually controlled with an optional upgrade to digital control. The 2.x Laser takes all the optimizations learned from the first laser and all the other lasers documented on buildlog.net forum.

more on this:http://www.buildlog.net/blog/2011/02/buildlog-net-2-x-laser/

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Buildlog.net_2.x_Laser&oldid=19935"