CEB Press/Manufacturing Instructions/Roller guides
Jump to navigation
Jump to search
Main > Housing and construction > CEB Press > CEB press building instructions
Tools Required
- Hole punch or drill with 1/2" bit
- Welder
Materials Required
- 30”x2”x1/2” (2)
- 30”x2.5”x3/16” (2)
- 3/8”x2”x8.5” (2)
- 1/2”x2”x3.5” (2)
- 1/2”x2”x4 3/4” (2)
- 12mm V Groove Guide Bearing:Sealed Buy
Diagrams
Fabrication Steps
punch 1/2" holes:
- 3/8”x2”x8.5” (2) – 3” sep at center
- 1/2”x2”x3.5” (2) – 1” off end
- 1/2”x2”x4 3/4” (2) – 1” off end