PowerCube Oil Cooler Mount

From Open Source Ecology
Revision as of 03:56, 12 December 2011 by Tom Griffing (talk | contribs) (Created page with "=====Oil Cooler Mount===== *[2] ¼” x 2” x 24” Plates **This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ *[2] ¼” x ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Oil Cooler Mount
  • [2] ¼” x 2” x 24” Plates
    • This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ
  • [2] ¼” x 2” x 1” Plates
  • [2] ¼” x 2” x 22” Plates (Note: the holes in these plates should be 6 inches apart, at 3" and 9" from bottom)
OilCoolerMount.png

Note the correction on the dimensions of cooler mounts; hole can be oversized if washers are used:

http://img.youtube.com/vi/e3H9iLJPrM4/0.jpg
Retrieved from "https://wiki.opensourceecology.org/index.php?title=PowerCube_Oil_Cooler_Mount&oldid=47703"