PowerCube Oil Cooler Mount

Oil Cooler Mount

[2] ¼” x 2” x 24” Plates
- This is fan mount, not cooler mount. Holes in fan mount are missing. Length should be 23", not 24" -MJ
[2] ¼” x 2” x 1” Plates
[2] ¼” x 2” x 22” Plates (Note: the holes in these plates should be 6 inches apart, at 3" and 9" from bottom)

Note the correction on the dimensions of cooler mounts; hole can be oversized if washers are used: