Marcin ose YouTube Video Content

This is an index of videos which may be used to supplement remote video editing.

Construction 2011

• Transit use during HabLab construction - with John Marlatt, carpenter - [1]
• Towards HabLab roof - [2] - with Floyd Hagerman; discuss steps and time required for putting on roof
• Bulldozing construction site for HabLab - [3]

LifeTrac Tractor

• (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [4]
• LifeTrac Walkthrough (15 Mar 2009), 15 Mar 2009 - [5]
• more LifeTrac detail, 18 Mar 2009 - [6]
• Augering Post and Planting Holes, 28 Apr 2009 - [7]
• Loader Arms Adjustment, 11 Jun 2009 - [8]
• Lifetrac Drive, 16 Apr 2011 - [9]
• LifeTrack III, 16 Apr 2011 - [10]
• Bending of Tracks for Tractor, 27 Aug 2011 - [11]
• Lifetrac Erging from Cave, 7 Sep 2011 - [12]
• LifeTrac Trimmed in Half, 11 Sep 2011 - [13]
• Lifetrac to Bobcat Conversion Plate, 12 Sep 2011 - [14]
• Midnight oil episode: lifetrac shipping, 26 Sep 2011 - [15]
• Documenting Lifetrac with Ian, 26 Sep 2011 - [16]
• How to get Lifetrac up?, 27 Sep 2011 - [17]
• Loading Lifetrac, 27 Sep 2011 - [18]
• Chaining Lifetrac up, 27 Sep 2011 - [19]
• Lifetrac up!, 27 Sep 2011 - [20]
• Lifetrac on trailer, 27 Sep 2011 - [21]
• Ready to ship, 27 Sep 2011 - [22]
• Lifetrac control valves, 27 Sep 2011 - [23]
• LifeTrac Power Cube chokes, 27 Sep 2011 - [24]
• LifeTrac shipping off, 27 Sep 2011 - [25]
• Industry standard bulldozer, 28 Sep 2011 - [26]
  • Toothbar
    • Open Source Tooth Bar, 22 Oct 2008 - [27]
    • Toothbar bucket prototype 2, 23 Sep 2011 - [28]
• Welding Lifetrac tracks, 3 Oct 2011 - [29]
• Lifetrac Tracks design and jig comments, 3 Oct 2011 - [30]
• Filling Tractor 2 with hydraulic fluid, 4 Oct 2011 - [31]
• Motor control valve plumbing, 7 Oct 2011 - [32]
• First FeF Hydraulic Hack, 7 Oct 2011 - [33]
• Lifetrac 3 tracks, 10 Oct 2011 - [34]

---

• Power beyond port - hack - [35]

CEB

• CEB Cyclinder Testing, 5 Nov 2007 - [36]
• CEB Cylinder Mounting, 26 Nov 2007 - [37]
• CEB Testing with Hopper, 26 Dec 2007 - [38]
• Advanced Compressed Earth Block Press Fabrication, 18 Jan 2008 - [39]
• CEB Cylinder Mounting Assembly Preparation, 18 Jan 2008 - [40]
• CEB Press Plate Box, 18 Jan 2008 - [41]
• Compressed Earth Block Press Press Plate Testing, 18 Jan 2008 - [42]
• CEB Cylinder Mounting in Frame, 18 Jan 2008 - [43]
• First Completed CEB Prototype Testing, 18 Jan 2008 - [44]
• First CEB Block Ejected, 18 Jan 2008 - [45]
• Factor e Live 8, Advanced CEB Press and Solar Panels, 3 Sep 2008 - [46]
• (Factor e Live 10) CEB Field Testing, 16 Oct 2008 - [47]
• Open Source CEB Press Production Test Runs, 5 Nov 2008 - [48]
• CEB Brick Production Day 1, 9 Nov 2008 - [49]
• 5000 Compressed Earth Bricks Pressed, 25 Nov 2008 - [50]
• CEB field report - 5691 bricks pressed, 27 Nov 2008 - [51]
• Populating the CEB addition, 29 Nov 2008 - [52]
• CEB Plan B - Snow flurries, 30 Nov 2008 - [53]
• First CEB Brick Laid, 2 Dec 2008 - [54]
• First CEB Wall Section, 3 Dec 2008 - [55]
• CEB Wall Growing, 8 Dec 2008 - [56]
• Mounting the trusses on the CEB building, 11 Dec 2008 - [57]
• CEB Addition Near Completion, 19 Dec 2008 - [58]
• Factor e Live Distillations (part 5) The CEB Story - To Build a Village, 16 Jan 2009 - [59]
• CEB, Hexacube, and Hexayurt, 23 Feb 2009 - [60]
• Green Roof, 26 Feb 2009 - [61]
• CEB Hopper Problem Statement, 26 Feb 2009 - [62]
• Hexacube 2, 5 Mar 2009 - [63]
• Liberator 2 function, 12 Apr 2009 - [64]
• CEB controller testing with secondary cylinder, 18/12/11 - [65]
• CEB Controller 2011, 27 Aug 2011 - [66]
• Compression Chamber Quality Control, 1 Sep 2011 - [67]
• CEB Hoppers, 6 Sep 2011 - [68]
• Finising CEB Hoppers, 7 Sep 2011 - [69]
• CEB Secondary Cylinder hydraulic Connection, 10 Sep 2011 - [70]
• CEB needle valve, 19 Sep 2011 - [71]
• Main CEB cylinder testing, 19 Sep 2011 - [72]
• Full CEB Automation with Detroit Fab Lab Solenoid Drivers, 19 Sep 2011 - [73]
• Speed control needle valve, 23 Sep 2011 - [74]
• Ceb column foundation rebar, 24 Sep 2011 - [75]
• CEB vault prototype, 28 Sep 2011 - [76]
• 1 Squaring CEB Drawer, 2 Oct 2011 - [77]
• 2 frame jig, 2 Oct 2011 - [78]
• 3 fitting cylinder, 2 Oct 2011 - [79]
• 4 frame and roller guide holes, 2 Oct 2011 - [80]
• 5 frame jig turning, 3 Oct 2011 - [81]
• 6 frame welding, 3 Oct 2011 - [82]
• 7 making bolts, 3 Oct 2011 - [83]
• 8 shims squaring drawer, 3 Oct 2011 - [84]
• 9 squaring hyd cylinder, 3 Oct 2011 - [85]
• 10 stretching the frame, 3 Oct 2011 - [86]
• 11 torching sensor holes, 3 Oct 2011 - [87]
• Controller wiring 1, 7 Oct 2011 - [88]
• Controller wiring 2&3, 7 Oct 2011 - [89]
• Controller wiring 4, 7 Oct 2011 - [90]
• Controller 5, 7 Oct 2011 - [91]
• Controller 6, 7 Oct 2011 - [92]
• CEB finishing, 7 Oct 2011 - [93]

---

• roller setup - [94]
• Grate modification - [95]
• Reinforcing compression chamber - [96]
• Shaker in action - [97]
• Controller board etching playlist - [98]

Solar

• Solar Panel Construction 1, 21 Jul 2008 - [99]
• Solar Panel Construction 2, 21 Jul 2008 - [100]
• Solar Panel Construction 3, 21 Jul 2008 - [101]
• Factor e Live 8, Advanced CEB Press and Solar Panels, 3 Sep 2008 - [102]
• (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [103]

Digging

• Rotary Hydraulic Well Digging, 3 Apr 2008 - [104]
• Digging a Well Part 2, 6 Aug 2008 - [105]
• Augering Post and Planting Holes, 28 Apr 2009 - [106]

Rototiller/Soil Pulverizer

• (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [107]
• Soil pulverizer prototype 3, 22 Sep 2011 - [108]
• Pulverizer stop angle mod, 22 Sep 2011 - [109]
• Soil Pulverizer prototype 3 complete, 23 Sep 2011 - [110]
• Soil Pulverizer prototype 3 welding, 23 Sep 2011 - [111]
• Loading soil Pulverizer - mower, 3 Oct 2011 - [112]
• Soil Pulverizer prototype 3, 8 Oct 2011 - [113]

Biodiesel Reactor

• (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [114]

Open Source Backhoe

• Open Source Backhoe, 19 Oct 2008 - [115]
• Open Source Tooth Bar, 22 Oct 2008 - [116]

Digital Fabrication

• HydraRaptor, 6 Apr 2009 - [117]
• HydraRaptor (part 2), 7 Apr 2009 - [118]
• Detroit fab lab solenoid driver, 22 Sep 2011 - [119]

Torch Table

• Torch Table finishing 1 - 16 Apr 2011 - [120]
• Torch table with faulty Xylotex controller, 17 May 2011 - [121]
• CNC Torch Table Tip height, 11 Sep 2011 - [122]

Power Cube

• Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [123]
• Torching Engine Mount Plates for Power Cube, Part 1, 1 Sep 2011 - [124]
• Power Cube Frames, 7 Sep 2011 - [125]
• Power Cube Welding with 90 Amp MIG Welder, 10 Sep 2011 - [126]
• Power Cube Fabrication Step 1, 11 Sep 2011 - [127]
• Power Cube Fabrication Step 2, 11 Sep 2011 - [128]
• Power Cube Fabrication Step 3, 11 Sep 2011 - [129]
• Power Cube Fabrication Step 4, 11 Sep 2011 - [www.youtube.com/watch?v=_h9LPdWWq9A&feature=plcp&context=C3008e42UAOEgsToPDskKjwYcrDbde2YMuk3QTk4to]
• Power Cube Fabrication Step 5 - Clamping, 11 Sep 2011 - [130]
• Briggs and Stratton Interim Power Cube 27 hp Engine Leak, 10 Sep 2011 - [131]
• Leak part 1, 11 Sep 2011 - [132]
• Leak part 2, 11 Sep 2011 - [133]
• Leak part 3, 11 Sep 2011 - [134]
• Battery container welding, 12 Sep 2011 - [135]
• Hydraulic Cooler Mounting, 12 Sep 2011 - [136]
• The Memorial Tom Griffing Power Cube, 12 Sep 2011 - [137]
• Power Cube Extending Plates, 12 Sep 2011 - [138]
• Tacking battery mounts, 12 Sep 2011 - [139]
• Key and throttle mounts, 12 Sep 2011 - [140]
• Battery Mount Cutting, 12 Sep 2011 - [141]
• Torching motor mount plate shaft hole, 12 Sep 2011 - [142]
• Assembly order review for power cube, 12 Sep 2011 - [143]
• Power Cube Power Switch, 13 Sep 2011 - [144]
• Hydraulic Cooler mount bolt locations, 13 Sep 2011 - [145]
• Kohler Engine mounting in PC, 14 Sep 2011 - [146]
• Hydraulic cooler mount overview, 14 Sep 2011 - [147]
• Kohler 25 hp mounting hint, 14 Sep 2011 - [148]
• Hydraulic cooler mounting and bolts, 14 Sep 2011 - [149]
• Kohler engine mounting nightmares, 14 Sep 2011 - [150]
• Tightening Kohler engine bolts, 14 Sep 2011 - [151]
• Notice on hydraulic pump mounting, 14 Sep 2011 - [152]
• Fan mounting, 14 Sep 2011 - [153]
• Pump mounting bolts size, 14 Sep 2011 - [154]
• Fan trim for power cube, 14 Sep 2011 - [155]
• Power Cube component measurements, 14 Sep 2011 - [156]
• Engine to pump coupling overview, 14 Sep 2011 - [157]
• Mounts and bolts for fans, 14 Sep 2011 - [158]
• Pump mount plate detail, 14 Sep 2011 - [159]
• Last dilemma of 25 hp Kohler mounting, 14 Sep 2011 - [160]
• Tacking hydraulic cooler in place, 14 Sep 2011 - [161]
• Tacking hydraulic cooler in place part 2, 14 Sep 2011 - [162]
• Pump Mounting refinement, 15 Sep 2011 - [163]
• Preferred engine mounting, 15 Sep 2011 - [164]
• Engine insertion into frame, 15 Sep 2011 - [165]
• Engine mounting lifetime design strategy, 15 Sep 2011 - [166]
• Pump bolt detail, 15 Sep 2011 - [167]
• Pump mounting with 4.5"x3/4" bolts, 16 Sep 2011 - [168]
• Loose pump, 16 Sep 2011 - [169]
• Welding pump plates to engine plates, 16 Sep 2011 - [170]
• Power Cube production line, 16 Sep 2011 - [171]
• Fan Attachment, 17 Sep 2011 - [172]
• Fan mount bolt pattern - welding, 17 Sep 2011 - [173]
• Fan bolt specs, 17 Sep 2011 - [174]
• Protecting bolt threads, 17 Sep 2011 - [175]
• Starter switch wiring on power cube, 20 Sep 2011 - [176]
• Irregular fan mounts, 22 Sep 2011 - [177]
• Dangling Power, 23 Sep 2011 - [178]
• Kohler starter solenoid nut, 24 Sep 2011 - [179]
• Filling power cube with hydraulic fluid, 24 Sep 2011 - [180]
• LifeTrac Power Cube chokes, 27 Sep 2011 - [181]
• Filling Tractor 2 with hydraulic fluid, 4 Oct 2011 - [182]
• Filling power cube, 4 Oct 2011 - [183]
• Muffler design, 5 Oct 2011 - [184]
• Tack Welding cooler mounts, 7 Oct 2011 - [185]
• Pump mounting variations, 7 Oct 2011 - [186]
• Torching mount plates for motor on power cube, 7 Oct 2011 - [187]
• Battery mount cutting, 7 Oct 2011 - [188]
• Tacking battery mounts, 7 Oct 2011 - [189]

Dimensional Sawmill

• Dimensional Sawmill Part 1, 10 Sep 2011 - [190]
• Dimensional Sawmill Part 2, 10 Sep 2011 - [191]
• Dimensional Sawmill Part 3, 10 Sep 2011 - [192]
• Dimensional Sawmill Part 4, 10 Sep 2011 - [193]
• Open Source dimensional sawmill fabrication interview, 12 Sep 2011 - [194]

-Prototyping costs of dimensional sawmill, 22 Sep 2011 - [195] -Sawmill z, 22 Sep 2011 - [196]

Factor e Live

• Factor e Live, 2 Jun 2008 - [197]
• Factor e Live Week 2, 18 Jun 2008 - [198]
• Factor e Live - Part 3, 1 Jul 2008 - [199]
• Couldn't find part 4.
• Factor e Live - Part 5, 17 Aug 2008 - [200]
• Factor e Live - Part 6, Solar Turbine Beginnings, 18 Aug 2008 - [201]
• Factor e Live - Episode 7, 25 Aug 2008 - [202]
• (Factor e Live 8) Advanced CEB Press and Solar Panels, 3 Sep 2008 - [203]
• (Factor e Live 9) Open Source Tractor, Rototiller, Biodiesel Reactor, Solar Panels, 21 Sep 2008 - [204]
• (Factor e Live 10) CEB Field Testing, 16 Oct 2008 - [205]

Factor e Live Distillations

• Factor e Live Distillations (part 1), 5 Jan 2009 - [206]
• Factor e Live Distillations (part 2), 7 Jan 2009 - [207]
• Factor e Live Distillations (part 3) Towards the Open Source Tractor, 12 Jan 2009 - [208]
• Factor e Live Distillations (part 4) On the technology base for Evolving to Freedom, 13 Jan 2009 - [209]
• Factor e Live Distillations (part 5) The CEB Story - To Build a Village, 16 Jan 2009 - [210]
• Factor e Live Distillations (part 6) Personal Fabrication Machines, 20 Jan 2009 - [211]
• Factor e Live Distillations (part 7) Open Source Permaculture and Local Food Systems (part 7), 25 Jan 2009 - [212]
• Factor e Live Distillations (part 8) $1/Watt Solar Thermal Concentrator Steam Powered Electric Generator, 3 Feb 2009 - [213]
• Factor e Live Distillations (part 9) Open Collaborative Development, 5 Feb 2009 - [214]
• Factor e Live Distillations (part 10) Open Economic Model, 6 Feb 2009 - [215]
• Factor e Live Distillations - Post Scarcity Village, 10 Sep 2009 - [216]

TED Talks Event: Behind the Scenes

• Suzanne Lee's Kombucha Clothing, 27 Feb 2011 - [217]
• Meet a TED Fellow, 27 Feb 2011 - [218]
• Fellows Reception, 27 Feb 2011 - [219]
• Putting on makeup part 1, 28 Feb 2011 - [220]
• Putting on makeup part 2, 28 Feb 2011 - [221]
• Putting on makeup part 3, 28 Feb 2011 - [222]
• Random Ted Talks Clip Part 1, 28 Feb 2011 - [223]
• Random Ted Talks Clip Part 2, 28 Feb 2011 - [224]
• Random Ted Talks Clip Part 3, 2 Mar 2011 - [225]
• Random Ted Talks Clip Part 4, 4 Mar 2011 - [226]
• A Ted Talks Presentation - who?, 4 Mar 2011 - [227]
• Interview Lesa Mitchell, Kauffman Foundation, 2 Mar 2011 - [228]
• Interview with Rufus? Who? 4 Mar 2011 - [229]
• After TED Talks Update, 6 Mar 2011 - [230]
• TED Talk - Global Village Construction Set, 6 Oct 2011 - [231]

CNC Lathe

• Open Source CNC Lathe, 12 Sep 2011 - [232]

Baling/Hay Making

• Preparation for baling, 2 Oct 2011 - [233]
• Docenting the baling documentor, 2 Oct 2011 - [234]
• Mower ate a round bale, 2 Oct 2011 - [235]
• Stumped, 2 Oct 2011 - [236]
• Random Shot of Old Hay Baler, 11 Sep 2011 - [237]
• Hay conditioner 101, 2 Oct 2011 - [238]
• Meet the hay conditioner, 2 Oct 2011 - [239]
• HabLab and mowing for bales, 3 Oct 2011 - [240]
• Baling ergonomics, 5 Oct 2011 - [241]
• Countdown to baling, 5 Oct 2011 - [242]
• Baling day 1, 5 Oct 2011 - [243]
• Getting ready to bale, 5 Oct 2011 - [244]
• Baler adjustment, 5 Oct 2011 - [245]
• Engaging the baler, 5 Oct 2011 - [246]
• PTO engaged, 5 Oct 2011 - [247]
• Straw quality, 5 Oct 2011 - [248]
• First bale, 5 Oct 2011 - [249]
• Baling shakedown in progress, 5 Oct 2011 - [250]
• Baling 1, 5 Oct 2011 - [251]
• Baling 2, 5 Oct 2011 - [252]
• Baling 3, 5 Oct 2011 - [253]
• Baling 4, 5 Oct 2011 - [254]
• Baling 5, 5 Oct 2011 - [255]
• Baling 6, 5 Oct 2011 - [256]
• Baling 7, 5 Oct 2011 - [257]
• Baling 8, 6 Oct 2011 - [258]
• Baling 9, 6 Oct 2011 - [259]
• Baling day 1 summary, 6 Oct 2011 - [260]
• Baling results - day 2, 6 Oct 2011 - [261]
• On trailer to pick up bales, 7 Oct 2011 - [262]
• Picking up bales, 7 Oct 2011 - [263]
• Documentor on bales, 7 Oct 2011 - [264]
• 90 bales in 20' trailer, 7 Oct 2011 - [265]
• Stacking strawbales, 7 Oct 2011 - [266]
• Temporary bale structure, 7 Oct 2011 - [267]
• Temporary bale structure floor, 7 Oct 2011 - [268]
• Floor coming together, 7 Oct 2011 - [269]
• 8 minutes to build a platform, 7 Oct 2011 - [270]
• Beginning to stack bales on platform, 7 Oct 2011 - [271]
• Temporary bale structure, 7 Oct 2011 - [272]
• Picking up bales, 7 Oct 2011 - [273]
• Picking up bales 2, 7 Oct 2011 - [274]
• Dropping off bales, 7 Oct 2011 - [275]

Construction Plannin 2011

• Construction planning 1, 12 Oct 2011 - [276]
• Construction planning 2, 10 Oct 2011 - [277]

Workshop/HabLab

• Workshop excavation, 27 Sep 2011 - [278]
• Column excavation ergonomic analysis, 27 Sep 2011 - [279]
• Excavation workflow and ergonomics, 27 Sep 2011 - [280]
• Roof stringer structural testing plan, 27 Sep 2011 - [281]
• Pre-construction scene, 28 Sep 2011 - [282]
• Preconstruction with dozer, 28 Sep 2011 - [283]
• Preconstruction with dozer 2, 28 Sep 2011 - [284]
• Excavator beginning, 28 Sep 2011 - [285]
• Gravel spreading, 28 Sep 2011 - [286]
• HabLab 1 - bulldozing, 28 Sep 2011 - [287]
• HabLab 2, 28 Sep 2011 - [288]
• HabLab 3, 28 Sep 2011 - [289]
• HabLab 4, 28 Sep 2011 - [290]
• HabLab 5, 28 Sep 2011 - [291]
• Gravel base with skid loader, 28 Sep 2011 - [292]
• Gravel trucks, 28 Sep 2011 - [293]
• HabLab documentor, 28 Sep 2011 - [294]
• Riding the Cat D7 dozer, 28 Sep 2011 - [295]
• Cat D7 bulldozer fuel consumption, 28 Sep 2011 - [296]
• HabLab excavation, 28 Sep 2011 - [297]
• HabLab bulldozing view from Hexayurt, 28 Sep 2011 - [298]
• HabLab excavator and dozer, 28 Sep 2011 - [299]
• HabLab corner excavation, 28 Sep 2011 - [300]
• Foundation pads- night before concrete pour, 30 Sep 2011 - [301]
• Column foundation forms, 30 Sep 2011 - [302]
• Excavation discussions, 1 Oct 2011 - [303]
• Nearly finished grading, 1 Oct 2011 - [304]
• Clearing off vegetation, 1 Oct 2011 - [305]
• Dozer parking, 2 Oct 2011 - [306]
• Starting the dozing, 2 Oct 2011 - [307]
• Beginning to clear vegetation, 2 Oct 2011 - [308]
• More clearing vegetation, 2 Oct 2011 - [309]
• Excavator documentor, 2 Oct 2011 - [310]
• HabLab and mowing for bales, 3 Oct 2011 - [311]
• Concrete pads 101, 4 Oct 2011 - [312]
• Cement truck arrives, 4 Oct 2011 - [313]
• Ergonomic analysis of excavation, 5 Oct 2011 - [314]
• Screeing foundation pads, 5 Oct 2011 - [315]
• Living units- wall foundation pour, 13 Oct 2011 - [316]
• Rebar for HabLab, 13 Oct 2011 - [317]
• Preparing for wall foundations, 13 Oct 2011 - [318]
• HabLab rebar and embodied energy, 14 Oct 2011 - [319]
• HabLab foundations panorama, 14 Oct 2011 - [320]
• Ready to pour HabLab foundations, 14 Oct 2011 - [321]
• Pour panorama, 14 Oct 2011 - [322]
• Little dry, 14 Oct 2011 - [323]
• 8 cubic yards, 14 Oct 2011 - [324]

True Fans Update

• Dear True Fans: Production Scaling, 18 Sep 2011 - [325]
• Dear True Fans September 25, 2011, 25 Sep 2011 - [326]
• Full Steam Ahead - $60k construction grant is in, 28 Sep 2011 - [327]
• Monday Update, 3 Oct 2011 - [328]

Team Member Interviews

• Isaiah Saxon, 11 Mar 2011 - [329]
• Dan Granett, 11 Mar 2011 - [330]
• Brianna Kufa, 24 Aug 2011 - [331]
• Chris, 24 Aug 2011 - [332]
• Tom, 24 Aug 2011 - [333]
• Ian Conehead, 7 Oct 2011 - [334]
• Ted Mosher dedicated project visit, 7 Oct 2011 - [335]

Business License

• OSE Certification, 3 Oct 2011 - [336]

Misc.

• Heat Exchanger, 2 Nov 2007 - [337]
• Cordwood Addition Roof, 9 Dec 2007 - [338]
• Goat Birth, 1 May 2008 - [339]
• Walnut Grafting, 4 May 2008 - [340]
• Babington Burner "Flamethrower" Atomizing Oil, 1 Oct 2008 - [341]
• Babington Burner "Flamethrower" Continued, 2 Oct 2008 - [342]
• Open Source On-Demand Water Heater, 2 Nov 2008 - [343]
• Torch Table Day 1, 10 Dec 2008 - [344]
• Ama Makes the Goat Feeder, 20 Feb 2009 - [345]
• Starting the workshop stove for the first time, 1 Mar 2009 - [346]
• Fruit Propagation Workshop, 1 Mar 2009 - [347]
• Future Kitchen, 2 Mar 2009 - [348]
• Making Notebooks, 6 Mar 2009 - [349]
• Grafting and Root Cuttings Details, 7 Mar 2009 - [350]
• Spring Rains, 16 Mar 2009 - [351]
• Hexahatch Incubator, 4 Apr 2009 - [352]
• Industry Standard Cooking Video, 11 Apr 2009 - [353]
• Goat Birth, 16 Apr 2009 - [354]
• Compressed Air Water Pump Design, 10 Jun 2009 - [355]
• Cutting Rocks, 16 Mar 2011 - [356]
• Workshop Addition Complete, 28 Mar 2011 - [357]
• Video of a Wind Turbine, 31 Mar 2011 [358]
• Polish TV Interview, 5 Apr 2011 - [359]
• Random Polish TV Interview Member Clip, 5 Apr 2011 - [360]
• Random Pig Video, 5 Apr 2011 - [361]
• Random Train Ride Clip, 5 Apr 2011 - [362]
• Random HD Sample, 11 Apr 2011 - [363]
• New Welder: Megamig 450, 16 Apr 2011 - [364]
• Welder Testing, 16 Apr 2011 - [365]
• Xylotex Controller Configuration, 16 Apr 2011 - [366]
• Remote Sensing, 17 May 2011 - [367]
• Wheel shaft gussets, 19 Jun 2011 - [368]
• Bandsaw, 19 Jun 2011 - [369]
• Project Update, 4 Aug 2011 - [370]
• Power to Solenoid, 12 Aug 2011 - [371]
• Ergonomics of Cleaning Tank Bungs Prior to Welding, 1 Sep 2011 - [372]
• Fabrication of 5 Fuel and Hydraulic Tanks, 2 Sep 2011 - [373]
• Tapping threaded holes on Engine, 2 Sep 2011 - [374]
• Meeting On Friday, 2 Sep 2011 - [375]
• Grate Shaker Assembly, 3 Sep 2011 - [376]
• Suction Strainer, 6 Sep 2011 - [377]
• True Fans Sunday Update 2, 11 Sep 2011 - [378]
• Shonda, CNC Multimachine, and the Housing Crisis, 12 Sep 2011 - [379]
• HabLab - Margaret Ida, 12 Sep 2011 - [380]
• Natural resources to product, 12 Sep 2011 - [381]
• Last prep for construction Update, 12 Sep 2011 - [382]
• Last prep for construction - loading up, 12 Sep, 2011 - [383]
• Stringers/Wood Beams for OSE Workshop 2011, 13 Sep 2011 - [384]
• KHS Class of 1991 Reunion, 14 Sep 2011 - [385]
• Roof sections for ose shop, 15 Sep 2011 - [386]
• Emergency Construction Funding - Major Success Update, 15 Sep 2011 - [387]
• Global supply chains, 15 Sep 2011 - [388]
• Chickens going freerange, 17 Sep 2011 - [389]
• Staking worksop space for earthworks, 20 Sep 2011 - [390]
• Urban Farming Guys, James Slade replications, 22 Sep 2011 - [391]
• Column foundation rebar, 22 Sep 2011 - [392]
• New Update: Toothbar bucket, tractor tracks, and dimensional sawmill bl, 23 Sep 2011 - [393]
• Random Update: Monday midnight oil update, 28 Sep 2011 - [394]
• 12 foot peach tree, 2 Oct 2011 - [395]
• Pecan apricot catalpa, 2 Oct 2011 - [396]
• Secondary cylinder, 2 Oct 2011 - [397]
• Message to Jason Fields, 3 Oct 2011 - [398]
• Pawpaw Tree, 5 Oct 2011 - [399]
• Shonda - CNC Multimachine beginnings, 8 Oct 2011 - [400]
• GVCS Kickstarter intro video, 13 Oct 2011 - [401]

Documentation

• Documentation evolving, 7 Oct 2011 - [402]