CNCCMV2/CAD

Block Uniformity

• Keep 2 block dimensions same for all blocks

• Based on the conceptual design, 1 of the block dimensions will solely be used to fit the diameter of the leadscrews, precision shafts, and sleeve bearings.

• The other block dimension to be uniform will mostly support the part by its length on precision shafts.

• For accommodating leadscrew nuts up to 10mm or 3/8" dia, dimension 1 will be 40mm (approx. 1.5")

• For accommodating stepper motor mounting and axis stability, dimension 2 will be 75mm (approx. 3")

Stepper Motor Mount Uniformity

• Use the same stepper motor type for each axis.

• Nema 17 steppers for appropriate performance characteristics.

• Standard 31mm center-to-center mounting holes. Modular.

Sleeve Bearing Mount Uniformity

• Use the same sleeve bearing type throughout machine

• 2 fastening holes on the part to which sleeve bearing should be mounted. For sleeve bearing of 24mm diameter, mount circle with M5 screws and 1mm clearance should be 24 + 5 + 2 = 31mm diameter.

• 20mm depth mount holes

Leadscrew Nut Mount Uniformity

• Use the same leadscrew nut throughout machine

• 3 fastening holes on the part for the nut mounting. For current leadscrew nut, insertion diameter = 12.7mm, mount circle diameter = 19.05mm.

• 20mm depth mount holes

X Blocks

• The X major and minor blocks should have the same heights.

• Base to shaft hole = 30mm

• Base to stepper hole = 75mm

• Base to top = 100mm

• Side to mount holes = 10mm

Y Blocks

• The Y major and minor blocks should have the same heights.

• Base to X shaft hole = 25mm

• Base to Y lower shaft hole = 50mm

• Base to X stepper hole = 70mm

• Base to Y stepper hole = 95mm

• Base to Y upper shaft hole = 140mm

• Base to top = 150mm

Z Blocks

• The Z mount block should coincide with the Y shaft positions.

• Base to lower shaft hole = 25mm

• Base to stepper hole = 70mm

• Base to upper shaft hole = 115mm

• Base to top = 140mm

• The Z major and minor blocks should have the same shaft and stepper holes.

• Z major/minor thickness and width = 10mm x 85mm

• Side A to close shaft hole = 10mm

• Side A to stepper hole = 55mm

• Side A to far shaft hole = 100mm

• Side A to Side B = 110mm

End Block

• Side A to close shaft hole = 25mm

• Side A to stepper hole = 70mm

• Side A to far shaft hole = 115mm

• Side A to Side B = 140mm

Assembly

• 

Structure: Platform

• File:PlatformV2.pdf

• File:PlatformV2.stp

Structure: X Major Block

• File:XMajorBlockV2.pdf

• File:XMajorBlockV2.stp

Structure: X Minor Block

• File:XMinorBlockV2.pdf

• File:XMinorBlockV2.stp

Structure: Y Major Block

• File:YMajorBlockV2.pdf

• File:YMajorBlockV2.stp

Structure: Y Minor Block

• File:YMinorBlockV2.pdf

• File:YMinorBlockV2.stp

Structure: Z Mount Block

• File:ZMountBlockV2.pdf

• File:ZMountBlockV2.stp

Structure: Z Major Block

• File:ZMajorBlockV2.pdf

• File:ZMajorBlockV2.stp

Structure: Z Minor Block

• File:ZMinorBlockV2.pdf

• File:ZMinorBlockV2.stp

Structure: End Mount Block

• File:EndMountBlockV2.pdf

• File:EndMountBlockV2.stp

Structure: Spindle Block

• File:SpindleBlockV2.pdf

• File:SpindleBlockV2.stp

Bearings: Sleeve Bearing

• File:SleeveBearingV2.pdf

• File:SleeveBearingV2.stp

Drive: Leadscrew

• 320mm Lg, Qty 3

• 120mm Lg, Qty 1

Drive: Stepper Motor

• File:42BYGH404.pdf

Drive: Spindle Motor

• BLDC Outrunner

Shafts: XY Shaft

• File:XYShaftV2.pdf

• File:XYShaftV2.stp

Shafts: Z Shaft

• File:ZShaftV2.pdf

• File:ZShaftV2.stp

Shafts: Spindle Shaft

• File:SpindleShaft.pdf

• File:SpindleShaft.stp

Fasteners: Hardware Screw

• 20mm Lg, M5x0.8

Fasteners: Platemount Screw

• 30mm Lg, M5x0.8

Fasteners: Spindleblock Screw

• 60mm Lg, M5x0.8

Fasteners: M5 Washer

• 5.3mm ID, 10mm OD, 0.9-1.1mm Thk