RepRap and Electronics Fabrication Router Specifications

From Open Source Ecology
Revision as of 20:58, 3 March 2009 by WikiSysop (talk | contribs) (New page: =General= *0.3 mm accuracy *1 liter per hour printing volume capacity *Component cost of $300 for DIY fabrication =Flexibility= *Tool holder adaptable to microcircuit fabrication, there...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

General

  • 0.3 mm accuracy
  • 1 liter per hour printing volume capacity
  • Component cost of $300 for DIY fabrication

Flexibility

  • Tool holder adaptable to microcircuit fabrication, therefor it could make its own control circuit
  • Connecting rods extrudable on a small scale, see Metal Extrusion Specifications
Retrieved from "https://wiki.opensourceecology.org/index.php?title=RepRap_and_Electronics_Fabrication_Router_Specifications&oldid=6319"