PowerCube6 Pump Mount

Engine Mounting Plates

• ¼” x 8” x 13.5” Plate

• ¼” x 6” x 6” Plate

• ¼” x 2” x 2” x 5” Angle (2 ea)

Engine Mounts and Hydraulic Pump Mount

• Prepare the pump plate

• Bolt the ¼” x 2” x 2” x 8” plate to the ¼” x 2” x 2” x 29” angle as shown using 1/2” x 2” bolts:

• Bolt the ¼” x 8” x 12” plate to the 8" angle as shown using 1/2” x 2” bolts:

• Align the plate edges and secure at 90 degree angle and weld. We use welding magnets to hold the plates at 90 degrees:

• Mount the engine to the engine plate using [4] 5/16” x 2” bolts. The method for mounting may depend on your engine. See the following video for details:

http://img.youtube.com/vi/DO6wbwOjWNA/default.jpg

• Examine the engine shaft – it should be 2” long. If longer, cut the shaft to extend no more than 2” from the case. This length is necessary for the coupling. Put the larger keystock in the engine shaft and slide the shaft coupling on the engine shaft and tighten the allen screws to hold it in place.