Board Mount

From Open Source Ecology

Revision as of 22:51, 30 November 2012 by YK (talk | contribs) (→‎Materials)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Introduction

Design

Materials

Aluminum 6061T6511 Flat - 1/2" x 5" x 12" - from SpeedyMetals

Steps

Use CNC mini mill to drill pin hole pattern. Make sure holes do not go through the board mount; only about 1/2" deep.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Board_Mount&oldid=81952"