Uploads by Lucas Warner
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 03:52, 19 June 2013 | Wheel Mounts Part 5.dxf (file) |  |
19 KB | 1 | |
| 03:50, 19 June 2013 | Wheel Mounts Part 6.dxf (file) | |
2 KB | 1 | |
| 03:49, 19 June 2013 | Wheel Mounts Part 7.dxf (file) | |
2 KB | fixed | 2 |
| 03:42, 19 June 2013 | Wheel Mounts Part 8.dxf (file) | |
10 KB | 1 | |
| 03:41, 19 June 2013 | Wheel Mounts Part 9.dxf (file) | |
693 bytes | 1 | |
| 03:40, 19 June 2013 | Wheel mounts Part 10.dxf (file) | |
667 bytes | 1 | |
| 02:40, 19 June 2013 | All Three Wheel mounts ready for DXF conversion (v3) with 6 inch hole spacings for 3 inch bearings.skp (file) | |
768 KB | The bolt holes for the three-inch bearings have been changed to 6 inches apart. | 1 |
| 01:10, 19 June 2013 | Wheel Mounts color-coded snip.PNG (file) |  |
36 KB | 1 | |
| 01:08, 19 June 2013 | All Three Wheel mounts ready for DXF conversion (v1).skp (file) | |
787 KB | More fixes. color-coded by part type - 10 distinct parts | 3 |
| 18:17, 18 June 2013 | 3x8 Cylinder.skp (file) | |
119 KB | Modified to full lengths (retracted and extended). | 2 |
| 21:25, 15 June 2013 | Wheel mounts snip.PNG (file) |  |
34 KB | 1 | |
| 21:10, 15 June 2013 | MicroTrac (v6).skp (file) | |
23.68 MB | The finalized wheel mounts have been added. Tracks still need to be added. | 1 |
| 20:15, 15 June 2013 | Punch Die Set.JPG (file) |  |
1,020 KB | 1 | |
| 17:49, 15 June 2013 | PowerCube Module (15 Jun '13).skp (file) | |
2.88 MB | This is the working file. As it is drawn, this will fit the MicroTrac, the smallest machine that contains the PowerCube as part of its structure. | 1 |
| 17:33, 15 June 2013 | PowerCube Module (15 Jun '13).skb (file) | |
2.88 MB | 2 | |
| 15:55, 15 June 2013 | MIT Car Sketch.png (file) |  |
977 KB | Clearer image of the sketch. | 2 |
| 15:43, 15 June 2013 | IMG 2760.JPG (file) |  |
977 KB | 1 | |
| 02:40, 14 June 2013 | Space for welds 2.PNG (file) |  |
4 KB | 1 | |
| 02:39, 14 June 2013 | Space for welds.PNG (file) |  |
6 KB | 1 | |
| 02:38, 14 June 2013 | Weld space around tenon.PNG (file) |  |
4 KB | 1 | |
| 02:34, 14 June 2013 | Wheelmount Updated 6 12.skp (file) | |
475 KB | The shortened wheel mount (the mount that does not take a motor, but free wheels, instead) has 1/8" spaces for the welds. Where needed, it has an extra 1/16" clearance to account for the relatively large tolerances with the CNC torch table. | 2 |
| 00:03, 13 June 2013 | MicroTrac (v5).skp (file) | |
27.51 MB | Lined up wheels Seat and controls 53" wide Slimmed-down quick attach scale hydraulic cylinder in place | 1 |
| 23:46, 12 June 2013 | MicroTrac tracks.PNG (file) |  |
51 KB | 1 | |
| 23:41, 12 June 2013 | MicroTrac (v5) rear.PNG (file) | _rear.PNG) |
70 KB | 1 | |
| 23:33, 12 June 2013 | MicroTrac (v5).PNG (file) | .PNG) |
177 KB | 1 | |
| 19:25, 12 June 2013 | Slimmed down quick attach snip.PNG (file) |  |
24 KB | A slimmed down version of the MicroTrac quick attach component | 1 |
| 18:49, 12 June 2013 | Quick attach hydraulic snip 2.PNG (file) |  |
29 KB | 1 | |
| 16:26, 12 June 2013 | Quick attach hydraulic snip.PNG (file) |  |
29 KB | 2 | |
| 23:56, 11 June 2013 | Warehouse Quick attach wheel mount.PNG (file) |  |
22 KB | 1 | |
| 23:21, 11 June 2013 | Implement Quick attach detail snip.PNG (file) |  |
52 KB | 1 | |
| 23:16, 11 June 2013 | Modular , stackable machines.JPG (file) |  |
86 KB | 1 | |
| 05:07, 11 June 2013 | Utility Dump Cart.jpg (file) |  |
48 KB | MicroTrac ideas | 1 |
| 05:05, 11 June 2013 | Rigid sit-behind.JPG (file) |  |
129 KB | MicroTrac ideas | 1 |
| 23:29, 10 June 2013 | MicroTrac (offset).PNG (file) | .PNG) |
63 KB | View of the offset tracks | 1 |
| 23:21, 10 June 2013 | MicroTrac (Narrow).PNG (file) | .PNG) |
112 KB | 1 | |
| 23:19, 10 June 2013 | Stock Hydraulic Motors snip.PNG (file) |  |
32 KB | Now in the Warehouse. | 1 |
| 21:26, 10 June 2013 | Warehouse snip v3.PNG (file) |  |
86 KB | 1 | |
| 21:05, 10 June 2013 | Samplebeams.png (file) |  |
86 KB | 4 | |
| 17:56, 8 June 2013 | Microtrac preliminary.skp (file) | |
14.9 MB | 3 | |
| 00:37, 8 June 2013 | Revised MicroTrac Frame.PNG (file) |  |
102 KB | 1 | |
| 23:03, 6 June 2013 | Seat and Control Mounts MicroTrac.PNG (file) |  |
98 KB | 1 | |
| 00:04, 6 June 2013 | BOM.odt (file) | |
5 KB | Updated and corrected. | 2 |
| 23:48, 5 June 2013 | IronworkerBOM.skp (file) | |
2.84 MB | Design concerns are not reflected in this version. The BOM is updated/corrected. | 2 |
| 23:32, 5 June 2013 | Cross-section of shear and bracket with suggestion.PNG (file) |  |
53 KB | 1 | |
| 23:31, 5 June 2013 | Unnecessary piece maybe.PNG (file) |  |
47 KB | 1 | |
| 23:31, 5 June 2013 | Shearing bolt heads problem.PNG (file) |  |
59 KB | 1 | |
| 23:29, 5 June 2013 | Missing hole and clarification.PNG (file) |  |
28 KB | 1 | |
| 23:28, 5 June 2013 | Hole spacing issue 2.PNG (file) |  |
58 KB | 1 | |
| 23:28, 5 June 2013 | Hole spacing issue.PNG (file) |  |
31 KB | 1 | |
| 15:17, 5 June 2013 | MicroTrac seat and controls (prototype).skp (file) | |
585 KB | Lucas's portion of the MicroTrac. Because of the extreme early stage the MicroTrac is in, I left the conceptual drawing as open as possible. Attaching it in any way we later see fit will require minimal drawing onto this component. | 1 |
