Uploads by Marcin
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 00:03, 18 June 2020 | Stage3pulley.fcstd (file) |  |
858 KB | Chamfered | 8 |
| 23:57, 17 June 2020 | Stage3pulley6.png (file) |  |
40 KB | 1 | |
| 21:40, 17 June 2020 | 32mmbelt.png (file) |  |
11 KB | 1 | |
| 01:34, 17 June 2020 | Stage3pulley5.png (file) |  |
14 KB | 1 | |
| 00:07, 17 June 2020 | Stage3pulley.scad.zip (file) | |
936 bytes | Genaration with 16-tooth, 4.8 mm wide belt. Length is 38, larger than the 32 belt width. | 1 |
| 00:05, 17 June 2020 | Stage3pulley4.png (file) |  |
49 KB | 1 | |
| 23:58, 16 June 2020 | Stage3pulley3.png (file) |  |
13 KB | 1 | |
| 23:58, 16 June 2020 | 10pitch.scad.zip (file) | |
936 bytes | Starts the 32 mm wide belt. 16 tooth sprocket creation. | 5 |
| 23:46, 16 June 2020 | Stage3pulley2.png (file) |  |
7 KB | 1 | |
| 23:17, 16 June 2020 | Stage3pulley.png (file) |  |
19 KB | 1 | |
| 18:47, 15 June 2020 | Cross.png (file) |  |
10 KB | 1 | |
| 03:48, 14 June 2020 | Squaretubing.fcstd (file) | |
21 KB | Accurate 4 inch by half inch wall tube including welded seam for metal-3D print composites. | 4 |
| 03:47, 14 June 2020 | Accuratehalftube.png (file) |  |
8 KB | 1 | |
| 00:57, 14 June 2020 | Squaretubingdone.png (file) |  |
6 KB | 1 | |
| 00:23, 14 June 2020 | Squaretubing.png (file) |  |
19 KB | 1 | |
| 00:39, 13 June 2020 | 8mmcollar.stl (file) | |
95 KB | 1 | |
| 00:37, 13 June 2020 | 8mmcollar2.png (file) |  |
7 KB | 1 | |
| 00:36, 13 June 2020 | 8mmcollar.fcstd (file) | |
29 KB | 1 | |
| 03:12, 12 June 2020 | Hexcollar.stl (file) | |
230 KB | 1 | |
| 02:56, 12 June 2020 | Pollowblockbearing.stl (file) | |
210 KB | 1 | |
| 01:50, 12 June 2020 | Geardownassembly.fcstd (file) | |
26 KB | Dummy | 8 |
| 01:49, 12 June 2020 | Geardownwithpillow.png (file) |  |
34 KB | 1 | |
| 01:35, 12 June 2020 | Pollowblockbearing.fcstd (file) | |
39 KB | Dumb object | 2 |
| 01:33, 12 June 2020 | Pollowblockbearing.png (file) |  |
19 KB | 1 | |
| 01:02, 12 June 2020 | Geardownassembly5.png (file) |  |
35 KB | 1 | |
| 00:44, 12 June 2020 | Geardownassembly4.png (file) |  |
50 KB | 1 | |
| 22:54, 11 June 2020 | Hexcollar.fcstd (file) | |
141 KB | With axial holes for bearing mounting | 3 |
| 22:54, 11 June 2020 | Hexcollarplus.png (file) |  |
15 KB | 1 | |
| 22:36, 11 June 2020 | Hexcollar.png (file) |  |
19 KB | 1 | |
| 22:16, 11 June 2020 | Hexbearing.fcstd (file) | |
38 KB | Complete bearing with 3 parts | 12 |
| 22:15, 11 June 2020 | Hexbearing2.png (file) |  |
29 KB | 1 | |
| 02:23, 11 June 2020 | Hexbearing outer.stl (file) | |
404 KB | 1 | |
| 02:23, 11 June 2020 | Hexbearing inner.stl (file) | |
177 KB | 2 | |
| 01:30, 11 June 2020 | Innerrace.png (file) |  |
20 KB | 1 | |
| 01:12, 11 June 2020 | Outerrace.png (file) |  |
25 KB | 1 | |
| 00:40, 11 June 2020 | Hexbearing.png (file) |  |
6 KB | 1 | |
| 23:28, 10 June 2020 | Hexshaft.fcstd (file) | |
11 KB | Dumb version | 2 |
| 23:26, 10 June 2020 | Hexshaft.png (file) |  |
2 KB | 1 | |
| 23:20, 10 June 2020 | Geardownassembly3.png (file) |  |
170 KB | 1 | |
| 23:07, 10 June 2020 | Geardownassembly2.png (file) |  |
59 KB | 1 | |
| 22:57, 10 June 2020 | 8mmshaft.fcstd (file) | |
7 KB | Dumb version, 100 mm long | 3 |
| 22:55, 10 June 2020 | Geardownassembly.png (file) |  |
30 KB | 1 | |
| 22:46, 10 June 2020 | 16mmpulley.fcstd (file) | |
473 KB | Dumb object. | 9 |
| 22:43, 10 June 2020 | 10pitch9teethbelt.fcstd (file) | |
186 KB | Removed duplicate | 5 |
| 22:41, 10 June 2020 | 8mmspacer.fcstd (file) | |
38 KB | Dumb object. | 3 |
| 22:39, 10 June 2020 | 8mmcollar.png (file) |  |
24 KB | 1 | |
| 22:19, 10 June 2020 | 10pulley.fcstd (file) | |
225 KB | Dumb object. | 10 |
| 22:17, 10 June 2020 | Stage2sprocket.fcstd (file) | |
81 KB | Dumb object. | 2 |
| 22:06, 10 June 2020 | Tsinymotor.fcstd (file) | |
12 KB | Dumb object | 2 |
| 22:03, 10 June 2020 | Motorholder.fcstd (file) | |
15 KB | Dumb object. | 2 |
