Uploads by Marcin
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 21:17, 15 June 2023 | 2doublefixtee.png (file) |  |
50 KB | 1 | |
| 20:36, 15 June 2023 | Sinkplumbing.png (file) |  |
19 KB | 1 | |
| 20:22, 15 June 2023 | Poolheater.png (file) |  |
137 KB | 1 | |
| 04:43, 15 June 2023 | Sinkplumbing.fcstd (file) |  |
516 KB | Same as last, but added sink. No source files. | 2 |
| 22:22, 7 June 2023 | Frontmicrocanopytech.fcstd (file) | |
59 KB | 1 | |
| 22:05, 7 June 2023 | Bottomwindowtrimassy.fcstd (file) | |
55 KB | Small label correction. | 2 |
| 21:47, 7 June 2023 | Terracemicrocanopytech.fcstd (file) | |
71 KB | Small label correction | 2 |
| 05:30, 6 June 2023 | Canopy frame 2.fcstd (file) | |
109 KB | This is the 1x4 trim tech drawing. Last file was frame only. | 3 |
| 04:46, 31 May 2023 | Panelmounting.FCStd (file) | |
206 KB | Added sketch for roof layout of blocking, and blocking sketches on one panel. | 17 |
| 06:47, 30 May 2023 | PVpanelmountingcad.FCStd (file) | |
327 KB | Shows main dimensions. Drawing Dimensioning was too slow. | 2 |
| 06:18, 30 May 2023 | PVpanelmountingcad.png (file) |  |
7 KB | 1 | |
| 17:34, 21 May 2023 | 3doublewye.png (file) |  |
41 KB | 1 | |
| 03:01, 17 May 2023 | Powerladderangles.fcstd (file) | |
240 KB | 1 | |
| 03:01, 17 May 2023 | Powerladderangles.png (file) |  |
11 KB | 1 | |
| 02:09, 17 May 2023 | Gravellock.fcstd (file) | |
24 KB | 1 | |
| 22:39, 16 May 2023 | Gravellock.png (file) |  |
3 KB | 1 | |
| 21:31, 14 May 2023 | Form8453-TE OSE 2022.pdf (file) |  |
51 KB | Public record. | 1 |
| 21:28, 14 May 2023 | OSE Form990 2022.pdf (file) | |
266 KB | Public document for financial transparency. | 1 |
| 12:19, 13 May 2023 | Beadboardgen.png (file) |  |
6 KB | 1 | |
| 07:12, 12 May 2023 | Beadboard sample.fcstd (file) | |
23 KB | Sample nailing detail | 1 |
| 19:35, 11 May 2023 | Mainframinggenerator.fcstd (file) | |
35 KB | Corrected studs to lumbertype. | 4 |
| 09:00, 11 May 2023 | Customblockinggen.png (file) |  |
12 KB | 2 | |
| 09:00, 11 May 2023 | Customblockinggen.fcstd (file) | |
72 KB | Added custom aperture in bay 1. | 5 |
| 08:16, 11 May 2023 | Nailingboardgen.fcstd (file) | |
68 KB | Fixed z position to 1.5 in. | 2 |
| 07:43, 11 May 2023 | Nailingboardgen.png (file) |  |
10 KB | 1 | |
| 05:03, 11 May 2023 | Exteriorblockinggen.png (file) |  |
4 KB | 1 | |
| 05:03, 11 May 2023 | Exteriorblockinggen.fcstd (file) | |
14 KB | 1 | |
| 04:53, 10 May 2023 | Ladderblockinggen.fcstd (file) | |
68 KB | Placed each set into a folder. Toggle desired folder in part tree. | 2 |
| 04:36, 10 May 2023 | Ladderblockinggen.png (file) |  |
12 KB | 1 | |
| 03:44, 10 May 2023 | Utechanblockinggen.fcstd (file) | |
195 KB | Added lumbertype. For example, wall between house modules is a 2x6 wall with a double sided utility channel. | 8 |
| 03:37, 10 May 2023 | Mainframinggen.png (file) |  |
4 KB | 1 | |
| 03:35, 10 May 2023 | Utechanblocking.png (file) |  |
6 KB | 1 | |
| 08:35, 9 May 2023 | Custominteriordoorgen.fcstd (file) | |
79 KB | To use, select module width, module height, door width, door offset from left side, door height, if it's first floor. Also bifold door, and its trim. | 15 |
| 07:38, 9 May 2023 | Doormodulegen.png (file) |  |
3 KB | 1 | |
| 07:24, 5 May 2023 | Modulegenerator.fcstd (file) | |
199 KB | Reverted to 01:00, 5 May 2023 and saved that with a correction on Header Separation. | 84 |
| 04:32, 30 April 2023 | Sample conditional 16.fcstd (file) | |
202 KB | If then statement formula is shown in spreadsheet. | 1 |
| 19:42, 26 April 2023 | Standard interior module.fcstd (file) | |
7 KB | Bottom left corner is at (x,y,z)=(0,0,0) | 1 |
| 21:03, 20 April 2023 | Module48.fcstd (file) | |
19 KB | Corner module, no apertures shown | 1 |
| 17:07, 14 April 2023 | Prusastats2021.png (file) |  |
101 KB | 1 | |
| 19:51, 10 April 2023 | ModuleI1.fcstd (file) | |
895 KB | 3 | |
| 18:56, 10 April 2023 | 15trap.fcstd (file) | |
84 KB | Clone. Has 2 parts that can be extracted from it to rotate trap as needed. | 2 |
| 21:59, 9 April 2023 | ModuleI1.png (file) |  |
15 KB | 1 | |
| 21:28, 8 April 2023 | 3doublesantee.png (file) |  |
48 KB | 1 | |
| 19:52, 8 April 2023 | Interiormodules.png (file) |  |
12 KB | 1 | |
| 19:28, 8 April 2023 | Interiormodules.fcstd (file) | |
18 KB | 1 | |
| 18:47, 8 April 2023 | Shr.png (file) |  |
35 KB | 1 | |
| 17:02, 23 March 2023 | Fronttrellisassy.fcstd (file) | |
201 KB | Updated tech drawing with long direction overlaid on short side. | 6 |
| 19:17, 18 March 2023 | Trellisbandgeo.png (file) |  |
21 KB | 1 | |
| 19:16, 18 March 2023 | Trellisbandgeo.fcstd (file) | |
5 KB | 1 | |
| 01:21, 17 March 2023 | Trellisinstall.png (file) |  |
11 KB | 2 |
