Moriah Log

Tues Jun 10, 2014

• Worked on the instruction manual to the Solenoid Module Assembly.

• Installed a plug-in on sketchup to export files as .stl files.

• Converted .stl files to .gcode files (through slic3r) to prepare them to print on the LULZBOT 3-D printer.

• (testing at slic3r settings> Infill> Fill Density> .05)

• 3-D printed the Minimug.

• Viewed .stl files to check measurements in meshlab.

• • Presentation on 3D Printing - [1]

Mon Jun 9, 2014

• First day at FeF.

• Introduction to the CEB Press.

• Worked on the instruction manual for the Solenoid Module Assembly.

• Leveled a 3D-Printer (LULZBOT)

• Ran Bed Level Check tests

• Successfully printed my first 3D print. A PLA tubing with holes.

Mon Jun 9, 2014

• First day at FeF.

• Introduction to the CEB Press.

• Worked on the instruction manual for the Solenoid Assembly Module.

• Leveled a 3D-Printer (LULZBOT)

• Ran Bed Level Check tests

• Successfully printed my first 3D print. A PLA tubing with holes.