Power Cube v16.8

Development

Published the latest design in Sketchup below

This design has had few updates lately. Here are the latest updates:

Aug 2016: Twin 18HP engine design in the works - mostly complete, will be built in the September Power Cube workshop

Snapshot: Hydraulic ports - 2 3/4" male outputs from the top of the pumps, 2 3/4" female returns and 1 1/4" low pressure return.

Shapshot: Suction plumbing: Use 2 suction strainers and separate hoses to pumps, as reservoir ports are only 1 1/4" and these suction strainers are only rated at 8GPM each.

Question

How should corners be formed and welded for optimal strength? Here is one image of a corner, with one of the horizontal members in the corner and the others welded to it:

Should the orientation be the same for all 8 corners?

Should we employ any special grinding / welding procedures for the one weld where all three members meet?

Files

This is the 16.8 release. See file revision history for other versions.

Bill Of Materials (BOM): Power Cube BOM

• Duromax Engine Specs (with line drawings) File:DuromaxEngineSpecs.pdf

Power Cube Working Document: ["https://docs.google.com/NEWURL"]

Wiring Diagram: File:PC16.8WiringDiagram.dia Wiring Diagram

Formulas

Hydraulic Flow

Pump displacement: 0.677 Cubic inches / Revolution (CIPR)
Engine max speed: 3600 RPM
Flow per engine/pump: 3600 * 0.677 / 231 = 10.55 GPM
Total Flow: 21.1 GPM