Torch Table Initial Designs

From Open Source Ecology
Revision as of 23:06, 25 February 2008 by WikiSysop (talk | contribs) (New page: ---- Image:XYZ_table_drive.jpg ---- Y axis drive detail: *Y axis motion is on a 1 1/4"x1/8" square tube as the rail, with a surrounding, telescoping 4"x6"x1/8" tube: **Two telescopin...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

XYZ table drive.jpg

Y axis drive detail:

  • Y axis motion is on a 1 1/4"x1/8" square tube as the rail, with a surrounding, telescoping 4"x6"x1/8" tube:
    • Two telescoping tubes with bearings between them on all 4 sides function as a low-tech linear bearing
  • 4 foot working object width

Y axis detail.jpg

Z axis detail:

  • 1 foot working object height
  • Simple 1/4" threaded rod for drive

Z axis detail.jpg

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Torch_Table_Initial_Designs&oldid=1462"