Will Log

http://opensourceecology.org/wiki/User:Will

Wed 12th July 2017

Tried to create an option for Annotated images on the wiki, but do not have permission to import the template. (this was solved later)

Design Overview

File:LFX 24V Power Supply.fcstd

File:Voltage regulator module.FCStd

Sat July 8 2017

• File:Gearmotor 30RPM 32204 MD.FCStd
• File:FCSTD 8 PULLER BRKT RT.FCStd
• File:FCSTD 9 STANDOFF.FCStd
• File:FCSTD 10 SPOOL PULLEY A.FCStd
• File:FCSTD 11 SPOOL PULLEY B.FCStd

Fri July 7 2017

• File:Power switch.FCStd
• File:Wire Connector.FCStd

Mon July 3 2017

• created File:Letour 24V power supply.FCStd which become obsolete after discovering: File:LFX 24V Power Supply.fcstd
• File:Relay DPDT.FCStd
• File:Voltage regulator module.FCStd
• File:Gearmotor 100RPM 32206 MD.FCStd

Thu June 29 2017

• redrew STL files Lyman Filament Extruder: Spooler Electronic PCBs + Power Supply
• File:FCSTD 6 PULLER MOTOR BRKT.fcstd
• File:FCSTD 7 PULLER BRKT LT.fcstd

Wed June 28 2017

• redrew STL files Lyman Filament Extruder: Spooler Electronic PCBs + Power Supply
• File:FCSTD 1 SPOOL DISC.fcstd
• File:FCSTD 2 SPOOL CYL.fcstd
• File:FCSTD 3 SPOOL HOLDER BRKT.fcstd

Fri June 22 2017

• assembled PCB holder to circuit Mill file:File:D3D Circuit Mill.fcstd

Thu June 21 2017

• redrew STL file of PCBholder in FreeCad: File:PCBholder simplified.FCStd
• removed redundant end stops: File:D3D Circuit Mill.fcstd

Sat June 17 2017

converted these files from 13" to 16"

• Frame 16" assembled: File:Full Frame 16in.FCStd
• Single 16" frame: File:Single Frame 16in.fcstd
• Single y axis: File:D3D Circuit Mill Y Axis.fcstd
• Single x axis: File:D3D Circuit Mill X Axis.fcstd
• Single z axis: File:D3D Circuit Mill Z Axis.fcstd
• Spindle Motor: File:T-king spindlemotor.fcstd
• Spindle Motor Mount: File:D3D Circuit Mill Motor Mount.fcstd
• Assembly: File:D3D Circuit Mill.fcstd

Fri June 16 2017

updated File:D3D Circuit Mill.fcstd Assembled all pieces of the machine updated File:D3D Circuit Mill Z Axis.fcstd created bolt holes, changed size idler piece

Thu June 15 2017

updated File:D3D Circuit Mill.fcstd Added components: XYZ-axes (all 6), motor, frame, motor mount. Not yet assembled added File:D3D 13" Frame.fcstd added File:D3D Circuit Mill X Axis.fcstd 11 inch version added File:D3D Circuit Mill Y Axis.fcstd 13 inch version added File:D3D Circuit Mill Z Axis.fcstd 8 inch version

Wed June 7 2017

added File:Freecad test WvT.fcstd added Freecad test video