Non-Inverting Amplifier

From Open Source Ecology
Revision as of 00:56, 2 January 2018 by S Oberloier (talk | contribs) (Created page with "{|style="border:1px solid #000000; background-color: #ffff99; margin-left:.1em; margin-top:1px; -moz-border-radius:15px;" align="right" width="400px" !<center><big>Non-Inverti...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Non-Inverting Amplifier
Non invert amplifier.png
OCI Page: Non-Inverting Amplifier
Input: +-36V, single ended signal
Output: Amplified Signal

This is a design from the Open Circuit Institute. More can be found HERE.

Description

A simple non-inverting amplifier circuit, built around the famous LM741 op-amp. The gain is settable from 1 to 101. Supply can be up to +-36V. If a negative supply is not available, tie the input to ground.

Pins on the input side are as follows: 

  1. +V supply
  2. Signal In
  3. Ground
  4. -V supply

Pins on the output side are as follows: 

   1. Signal Out
   2. Ground

Design Files & Videos

Available at the Open Circuit Institute: http://opencircuitinstitute.org/content/non-inverting-amplifier

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Non-Inverting_Amplifier&oldid=163238"