D3D v18.04 Software

Background

There are 6 places where software may be configured when developing new versions of the OSE 3D Printer:

1. Marlin -
2. Configuration file (.ini) in Cura.
3. Start and end g-codes in Cura - contained in configuration file
4. Machine Settings in Cura - contains bed size, z offset, number of extruders, presence of heated bed. And - E steps per mm of filament.
5. Print parameters in Cura - contained in configuration file

To Get Proper Prints with a New Extruder

1. Verify e-steps for the extruder - and make sure Cura machine settings are consistent.

Software

Marlin

• D3D v18.04 Marlin is updated for a geared extruder - see - File:OSE Marlin.zip

Cura

• D3D Lulzbot Cura from D3D Controller