Related OpenCourseWare Material
A collection of useful to OSE OpenCourseWare Material
MIT
16.050 Thermal Energy
This course is taught in four main parts. The first is a review of fundamental thermodynamic concepts (e.g. energy exchange in propulsion and power processes), and is followed by the second law (e.g. reversibility and irreversibility, lost work). Next are applications of thermodynamics to engineering systems (e.g. propulsion and power cycles, thermo chemistry), and the course concludes with fundamentals of heat transfer (e.g. heat exchange in aerospace devices).
http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-050-thermal-energy-fall-2002/
16.07 Dynamics
This course covers the fundamentals of Newtonian mechanics, including kinematics, motion relative to accelerated reference frames, work and energy, impulse and momentum, 2D and 3D rigid body dynamics. The course pays special attention to applications in aerospace engineering including introductory topics in orbital mechanics, flight dynamics, inertial navigation and attitude dynamics. By the end of the semester, students should be able to construct idealized (particle and rigid body) dynamical models and predict model response to applied forces using Newtonian mechanics.
http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-07-dynamics-fall-2009/
16.20 Structural Mechanics
Applies solid mechanics to analysis of high-technology structures. Structural design considerations. Review of three-dimensional elasticity theory; stress, strain, anisotropic materials, and heating effects. Two-dimensional plane stress and plane strain problems. Torsion theory for arbitrary sections. Bending of unsymmetrical section and mixed material beams. Bending, shear, and torsion of thin-wall shell beams. Buckling of columns and stability phenomena. Introduction to structural dynamics. Exercises in the design of general and aerospace structures.
http://ocw.mit.edu/courses/aeronautics-and-astronautics/16-20-structural-mechanics-fall-2002/
16.225 Computational Mechanics of Materials
16.225 is a graduate level course on Computational Mechanics of Materials. The primary focus of this course is on the teaching of state-of-the-art numerical methods for the analysis of the nonlinear continuum response of materials. The range of material behavior considered in this course includes: linear and finite deformation elasticity, inelasticity and dynamics. Numerical formulation and algorithms include: variational formulation and variational constitutive updates, finite element discretization, error estimation, constrained problems, time integration algorithms and convergence analysis. There is a strong emphasis on the (parallel) computer implementation of algorithms in programming assignments. The application to real engineering applications and problems in engineering science is stressed throughout the course.
6.243J / 2.156J / 16.337J Dynamics of Nonlinear Systems
This course provides an introduction to nonlinear deterministic dynamical systems. Topics covered include: nonlinear ordinary differential equations; planar autonomous systems; fundamental theory: Picard iteration, contraction mapping theorem, and Bellman-Gronwall lemma; stability of equilibria by Lyapunov's first and second methods; feedback linearization; and application to nonlinear circuits and control systems.
16.660 / 16.853 / ESD.62J Introduction to Lean Six Sigma Methods
This course introduces the fundamental Lean Six Sigma principles that underlay modern continuous improvement approaches for industry, government and other organizations. Lean emerged from the Japanese automotive industry, particularly Toyota, and is focused on the creation of value through the relentless elimination of waste. Six Sigma is a quality system developed at Motorola which focuses on elimination of variation from all processes. The basic principles have been applied to a wide range of organizations and sectors to improve quality, productivity, customer satisfaction, employee satisfaction, time-to-market and financial performance.
16.810 Engineering Design and Rapid Prototyping
This course provides students with an opportunity to conceive, design and implement a product, using rapid prototyping methods and computer-aid tools. The first of two phases challenges each student team to meet a set of design requirements and constraints for a structural component. A course of iteration, fabrication, and validation completes this manual design cycle. During the second phase, each team conducts design optimization using structural analysis software, with their phase one prototype as a baseline.
4.125 Architecture Studio: Building in Landscapes
4.125 is the third undergraduate design studio. This subject introduces skills needed to build within a landscape establishing continuities between the built and natural world. Students learn to build appropriately through analysis of landscape and climate for a chosen site, and to conceptualize design decisions through drawings and models.
http://ocw.mit.edu/courses/architecture/4-125-architecture-studio-building-in-landscapes-fall-2002/
11.304J / 4.255J Site and Infrastructure Systems Planning
This course is a client-based land analysis and site planning project. The primary focus of the course changes from year to year. This year the focus is on Japan's New Towns.
Students will review land inventory, analysis, and planning of sites and the infrastructure systems that serve them. They will also examine spatial organization of uses, parcelization, design of roadways, grading, utility systems, stormwater runoff, parking, traffic and off-site impacts, as well as landscaping. Lectures will cover analytical techniques and examples of good site-planning practice. Requirements include a series of assignments and a client-based project.
4.296 Furniture Making
Furniture making is in many ways like bridge building, connections holding posts apart with spans to support a deck. Many architects have tried their hand at furniture design, Wright, Mies Van Der Rohe, Aalto, Saarinen, Le Corbusier, and Gerhy.
We will review the history of furniture making in America with a visit to the Decorative Arts Collection at the Museum of Fine Arts in Boston and have Cambridge artist/craftsman Mitch Ryerson show us his work and talk about design process. Students will learn traditional woodworking techniques beginning with the use of hand tools, power tools and finally woodworking machines.
Students will build a single piece of furniture of an original design that must support someone weighing 185 lbs. sitting on it 12 inches off the ground made primarily of wood. Students should expect to spend approximately 80 hours in the shop outside of class time.
Preregistered architecture students will get first priority but first meeting attendance is mandatory. Twelve student maximum, no exceptions.
http://ocw.mit.edu/courses/architecture/4-296-furniture-making-spring-2005/