HyperMesh

Main > Software > Wireless mesh networking

---

The mandate of the HyperMesh project is to provide a means of cheaply and easily distributing bandwidth and telephony services throughout a community.

The specifications must be identified:

• Multiple Input, Multiple Output
• Opportunistic mesh networking
• Ethernet, wireless, and broadband connectivity
• 3G/4G compatible
• VOIP
• Price point per unit of less than $50, less than $20 is preferred.

Outside resiliency is desired.

• PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
• PPE - Primary Processing Element, a Central Processing Unit. RAM and long-term storage requests are offloaded to the network via the *BIONOS - Basic Input Output Networking Operating System, includes support for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. If need be, it would interface with the network to access a higher level operating system.
• 8P8C - An Ethernet connector for physically interfacing with the HyperMesh device.

Configuration and diagnosis would take place via Ethernet or through Wireless connection.

Alternatively, http://i68.photobucket.com/albums/i15/KickAssClown/BS_MeshStation.jpg

• PSU - A Power Supply Unit that would provide sufficient power to all the component parts.
• PPE - Primary Processing Element, a Central Processing Unit.
• I/O - A USB and RJ45 connector for basic interface with the device. USB is optional. The device could be accessed and configured via RJ45 or Wirelessly.
• RAM - enough to operate quickly and efficiently even under high stress.
• SDD - Flash memory for long-term storage and for firmware upgrades. Enough for the OS plus firmware upgrades. Might be optional if firmware can be upgraded and OS can be retrieved via RJ-45 or Wirelessly.
• NET - Controller for 802.3, 802.11 s/g/(n/b are optional), and IMT-2000. Might be incorporated into the BIOS.

License: TAPR Open Hardware License

Website: http://ubermesh.blogspot.com