CEB Modeling

Introduction

This page is dedicated to visual and performance modeling of the Liberator, OSE's open source, high-performance CEB press.

Finite Element Analysis

Calculation Symmetry

Bolt Strength

Bolt torquing can be measured by a torque wrench:

http://www.overstock.com/Auto-Parts/3-8-inch-Ratcheting-Torque-Wrench/3142342/product.html?SEC_IID=29607

Starting to create the 3D model from previous sketches provided. We should take a look at using square washers on the back of the channels, they help to apply the forces evenly on the bolts and structure.

<a href="http://s11.photobucket.com/albums/a171/vkirchner/CEB/?action=view&current=CEB-Start.jpg" target="_blank"><img src="http://i11.photobucket.com/albums/a171/vkirchner/CEB/CEB-Start.jpg" border="0" alt="Photobucket"></a>

<a href="http://s11.photobucket.com/albums/a171/vkirchner/CEB/?action=view&current=CEB-Start1.jpg" target="_blank"><img src="http://i11.photobucket.com/albums/a171/vkirchner/CEB/CEB-Start1.jpg" border="0" alt="Photobucket"></a>