Lithium-ion Battery Pack v25.11 Requirements + Value Proposition
Requirements
These requirements use "shall" for mandatory/must-have requirements and "should" for recommended/nice-to-have requirements.
The battery pack shall have a nominal voltage of ~18V.
The battery pack shall have a capacity of 2500 mAh or more.
The battery pack shall be rechargeable.
The battery pack shall use a Lithium-ion chemistry.
- Should use Li-ion,LiFePO4, NMC or equivalent
- Shall NOT use LiPo(RC lipo) , since this chemistry needs more careful handling of charging/discharging, fire hazard.
The battery pack shall use widely available batteries that are easy to source.
The battery pack shall have a BMS. TODO: Need more specific safety requirements after deciding on a chemistry.
The battery pack shall have a snap-in interface suitable for cordless power tools.
The battery pack should be stackable in parallel to increase capacity.
The battery pack should be stackable in series to increase voltage.
The battery pack should have a replaceable interface. Replaceable as in support different interfaces to different things. And as in repairable I suppose.